Dediprog Technology Co Ltd
Dediprog SO8 Testclip mit 2x10 Stecker
Dediprog SO8 Testclip mit 2x10 Stecker
SKU: EM-TC-8
Zahlungsmethoden
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
Overview
Dediprog EM-TC-8 SO8 Test Clip provides a direct, reliable connection to SO8 serial flash devices soldered on the target PCB, enabling in-circuit programming and debug without desoldering. It mates via a 2×10 (20-pin) IDC lead with Dediprog SF600/SF600Plus-G2 and EM100Pro-G3 tools for streamlined workflows. It supports both SO8N (150 mil) and SO8W (200 mil) packages commonly used for SPI NOR flash.
The clip is designed for compatibility with most boards (no hardware modification required) and is supplied as a robust, serviceable accessory for engineering benches and field update tasks. Dediprog also offers related clips in the range (e.g., EM-TC-16 for SO16W) and ISP-series clips for the SF100 ISP programmer, allowing selection by programmer and package.
Engineers choose EM-TC-8 when they need dependable, repeatable contact on soldered-down SO8 flash with minimal downtime—particularly during bring-up, recovery, or firmware iteration—while staying inside the Dediprog ecosystem for known pinout and signal integrity.
Downloads
Why Engineers Choose the Dediprog SO8 Testclip mit 2x10 Stecker
Rapid In-Circuit Updates
Tight Integration
Covers Common SO8 Footprints
| Ordering information | |
|---|---|
| Part number (SKU) | EM-TC-8 |
| Manufacturer | Dediprog Technology Co Ltd |
| EAN | 5055383687930 |
| Warranty | 12 Monate |
| Shipping weight | 0.5 kg |
-
1 ×
Dediprog SO8 Testclip mit 2x10 Stecker
Contact us to confirm the full contents of the box.
Questions and Answers
-
Does It Support Both SO8 Package Widths?
Yes. Dediprog lists it for SO8N (150mil) and SO8W (200mil) packages, which covers the usual 8-pin SPI NOR footprints. For SO16W devices, use the EM-TC-16.
-
Will the Clip Hold Reliably During Longer Operations?
Dediprog doesn't publish grip or contact-life figures for this clip. Before a long operation, check the clip is seated squarely on the device; Dediprog's FAQ advises confirming the clip is attached properly.
-
Is Desoldering Ever Required?
Not usually. Dediprog says the clip connects to the serial flash soldered on the board, with no hardware modification for most applications. Desoldering is normally only needed if the board can't release the SPI bus or share power safely with the programmer.
-
What Are SO8N and SO8W?
Standard 8-pin SOIC package widths: SO8N is about 150mil (narrow) and SO8W about 200mil (wide). Some Dediprog documents give SO8W as 207mil.
-
Which Programmers Is the EM-TC-8 Designed to Work With?
Dediprog designed it for the EM100/EM100Pro emulators and SF600/SF600Plus programmers, using their 2x10 header. It's also listed as an accessory for the EM100Pro-G3 and SF600Plus-G2.
No questions match your search.