Passa alle informazioni sul prodotto
1 su 1

Total Phase, Inc

Total Phase PROMIRA I2C Active - Level 2 Application

Total Phase PROMIRA I2C Active - Level 2 Application

SKU: TP600210

Prezzo di listino
£650.00 exc VAT
£780.00 inc VAT
Prezzo di listino Prezzo scontato
£650.00 exc VAT
£780.00 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Information We Need for Your Order

We will send you the licence for this serial number.

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Overview

Total Phase PROMIRA I2C Active - Level 2 Application is a firmware add-on for the PROMIRA serial interface.

THIS PRODUCT IS NOT AVAILABLE FOR DELIVERY TO THE USA

Download

User Manuals

  • Total Phase Promira I2C/SPI Active PDF1.8 MB · 1.39 · Apr 2026
    Details

The Promira I2C Active Level 2 Application (TP600210) raises a Total Phase Promira Serial Platform to High-speed mode I2C, running master and slave at up to 3.4 MHz. It doubles the configurable GPIO to twelve (ten while using I2C) and keeps everything in Level 1: multi-master support, a 256-byte slave response, clock stretching and SMBus, PMBus and IPMI compatibility. It is the licence for validating and programming High-speed mode I2C parts at their rated clock.

High-Speed Mode I2C to 3.4 MHz

As a High-speed I2C host adapter, Level 2 drives and answers the bus in Standard mode, Fast-mode Plus (1 Mbps) and High-speed mode (3.4 MHz). Testing an HS-mode sensor or memory at 3.4 MHz shows the timing margins and bus loading of the real design, which a 400 kHz or 1 MHz adapter cannot reveal. It also cuts programming time on large I2C EEPROMs, where a higher clock directly shortens the cycle on a production line.

Twelve GPIO for Fixtures and Side-Band Signals

Up to twelve configurable GPIO, ten while the I2C pins are in use, let one Promira drive resets, interrupts, enable lines and strapping pins while it talks to the device under test. On a test fixture that removes a second I/O card and keeps bus traffic and control signals under one API and one timebase.

Built on I2C Active Level 1

Level 2 is installed on top of the I2C Active Level 1 licence, which Total Phase lists as a prerequisite. Everything Level 1 does carries over: multi-master transmit and receive, asynchronous slave transmit and receive with a response of up to 256 bytes, 10-bit addressing, repeated start, inter-bit and inter-byte clock stretching, and DDC, SMBus, PMBus, SBBus, IPMI and TWI compatibility.

Software and API

Control Center Serial gives interactive control of the bus and GPIO. Flash Center programs and verifies I2C and SPI memory devices (Windows and Linux). The free Promira Software API covers C, C#, Python, .NET, VB.NET and VB6, with a LabVIEW driver for test stations, and the Promira Aardvark Wrapper API runs code written for the Aardvark API while you port it. Promira software runs on Windows 10 and 11, Linux and macOS 13 or later.

Specifications

Function I2C master and slave (Active), High-speed mode
I2C master and slave speed Up to 3.4 MHz
Modes Standard mode, Fast-mode Plus (1 Mbps), High-speed mode (3.4 MHz)
Slave response Up to 256 bytes, asynchronous slave transmit and receive
Compatible protocols DDC, SMBus, PMBus, SBBus, IPMI, TWI
Configurable GPIO Up to 12 (10 while using I2C)
Prerequisite I2C Active Level 1 Application (TP600110)
Host platform Promira Serial Platform (TP500110), USB 2.0 or Gigabit Ethernet
Software Control Center Serial, Flash Center, Promira Software API, LabVIEW driver
Manufacturer part number TP600210

Limitations

  • This is a software licence only. It runs on the Promira Serial Platform (£1,040 ex VAT), which is sold separately and must be in place before the licence can be installed.
  • Level 2 requires the I2C Active Level 1 licence (£120 ex VAT) on the same Promira. From a bare platform the two I2C licences total £770 ex VAT, plus the platform.
  • If your devices run at 1 MHz or below and six GPIO are enough, Level 1 alone does the job.

Which I2C Option Should You Choose?

Aardvark I2C/SPI Host Adapter Promira I2C Active Level 1 Promira I2C Active Level 2
I2C master and slave To 800 kHz 1 kHz to 1 MHz To 3.4 MHz (High-speed mode)
Configurable GPIO See product page 6 (4 while using I2C) 12 (10 while using I2C)
Host connection USB USB 2.0 or Gigabit Ethernet USB 2.0 or Gigabit Ethernet
Prerequisite None Promira Serial Platform Platform plus I2C Active Level 1
Price ex VAT £335 £120 plus platform £650 plus Level 1 and platform

A High-speed I2C host adapter earns its price when the part on your board is specified for High-speed mode, or when a fixture needs more than six GPIO. For Fast-mode Plus and below, stay with Level 1.

Typical Applications

Characterising a 3.4 MHz HS-mode temperature sensor against its datasheet timing. Programming large I2C EEPROMs at High-speed mode to shorten production cycle time. Running a PMBus power-sequencing test that also toggles enable and power-good lines from the Promira's GPIO.

Level 2 suits hardware validation engineers working with HS-mode parts, and test engineers building fixtures that need bus control and side-band I/O from one adapter.

Order the Promira I2C Active Level 2 Application from £650 ex VAT. For a formal quotation covering the platform and both I2C licences, request a quote from our team.

Last reviewed 5 October 2026.

Sources (6 Total Phase pages)
Ordering information
Part number (SKU)TP600210
ManufacturerTotal Phase, Inc
EAN5055383686902
Warranty12 months
  • 1 × Total Phase PROMIRA I2C Active - Level 2 Application

Contact us to confirm the full contents of the box.

Total Phase PROMIRA I2C Active - Level 2 Application compared with Total Phase PROMIRA I2C Active - Level 1 Application , Total Phase PROMIRA SPI Active - Level 2 Application and Total Phase PROMIRA SPI Active - Level 3 Application on 8 specifications.

Specifications of Total Phase PROMIRA I2C Active - Level 2 Application compared with Total Phase PROMIRA I2C Active - Level 1 Application , Total Phase PROMIRA SPI Active - Level 2 Application and Total Phase PROMIRA SPI Active - Level 3 Application
SpecificationThis product Total Phase PROMIRA I2C Active - Level 2 ApplicationTP600210In stock Total Phase PROMIRA I2C Active - Level 1 ApplicationTP600110In stock Total Phase PROMIRA SPI Active - Level 2 ApplicationTP600610In stock Total Phase PROMIRA SPI Active - Level 3 ApplicationTP600710In stock
I2C master Up to 3.4 MHzUp to 1 MHzNot supportedNot supported
I2C slave Up to 3.4 MHzUp to 1 MHzNot supportedNot supported
SPI master Not supportedNot supportedUp to 40 MHzUp to 80 MHz
SPI slave Not supportedNot supportedUp to 20 MHzUp to 20 MHz
SPI I/O width Not supportedNot supportedSingle/DualSingle/Dual/Quad
Slave selects Not supportedNot supportedUp to 3Up to 8
GPIO Up to 12Up to 6Up to 12Up to 16
Slave response buffer 256 bytes256 bytes256 bytes256 bytes
Price£650 £120 £245 £810
Domande ai nostri ingegneri

Domande e risposte

4 questions

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.