Passer aux informations produits
1 de 2

SEGGER Microcontroller GmbH

Isolateur JTAG SEGGER J-Link

Isolateur JTAG SEGGER J-Link

Isole votre sonde de débogage du matériel cible

SKU: 8.07.00

Prix habituel
£226.00 exc VAT
£271.20 inc VAT
Prix habituel Prix promotionnel
£226.00 exc VAT
£271.20 inc VAT
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Moyens de paiement

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Afficher tous les détails

Caractéristiques principales

Isolation de base (1 kV DC)
Prise en charge du fonctionnement des cibles 3,3 V et 5 V
Alimenté par l'émulateur et la cible
Connexion standard JTAG à 20 broches prenant en charge les signaux TRST, TDI, TMS, TCK, RTCK, TDO et RESET
Consommation électrique côté cible : 35 mA typ. / 50 mA max.

Présentation

The J-Link JTAG Isolator sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on JTAG at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1" male JTAG connectors, and it is powered from the probe side. Use it where the debug or production tools do not share a ground with the application.

Téléchargements

Manuels d'utilisation

  • SEGGER J-Link JTAG Isolator PDF331 KB · Jun 2026
    Détails

The SEGGER J-Link JTAG Isolator (part number 8.07.00) is an isolator box that sits between a J-Link or Flasher and the target, giving 1kV DC basic isolation on JTAG at up to 4 MHz for target interface voltages from 1.2V to 5V. Both sides use 20-pin 0.1" male JTAG connectors; the isolator is powered from the probe side and draws less than 25µA on the target side. Use it where the debug or production tools do not share a ground with the application.

JTAG Isolation for Motor Control, Sensor and Analogue Designs

SEGGER describes isolation as essential when the development or production tools are not connected to the same ground as the application. Motor control applications tend to introduce electrical spikes, and the isolator keeps them away from the probe. In sensor and analogue designs, it keeps the debug system from disturbing the measurement. The isolator uses high-speed digital isolators and passes TRST, TDI, TMS, TCK, RTCK, TDO and RESET.

Protection includes overvoltage and overcurrent protection on the probe side, overvoltage protection on the target VTref pin and ESD protection. Four LEDs show probe or programmer power, probe or programmer overload, target power and target RESET. On the target side, SEGGER's Knowledge Base lists pins 1 and 2 as VCC, through which the target side draws its power, with pins 17 and 19 not connected. See our SEGGER J-Link 20-pin connector pinout guide for the probe side.

What's Included

  • JTAG Isolator Box
  • 0.1" 20-pin ribbon cable

Specifications

Isolation 1kV DC, basic isolation
Target interface JTAG
Target signals TRST, TDI, TMS, TCK, RTCK, TDO, RESET
Max. target interface speed 4 MHz
Target interface voltage 1.2V to 5V
Probe-side connector 20-pin 0.1" male JTAG
Target-side connector 20-pin 0.1" male JTAG
Power supply Powered from the probe side
Target-side power consumption <25µA
Dimensions (L x W x H) 73mm x 46mm x 19mm
Weight 38g
Operating temperature +5°C to +60°C
Storage temperature -20°C to +65°C
Relative humidity <90% rH, non-condensing
Compatible J-Link models PRO PoE, PRO, Ultra, WiFi, PLUS, BASE
Compatible Flasher models PRO, PRO XL, Compact, Portable PLUS

Limitations

  • No SWD and no cJTAG: the isolator does not support bidirectional transmission on SWDIO or TMSC. Use the SWD Isolator for SWD.
  • Target interface speed is limited to 4 MHz.
  • Basic isolation only. Do not use it with hazardous voltages without a further protection measure such as double or reinforced isolation.
  • Third-party probes with the same pinout must supply 5V on pin 19; SEGGER states their use is at your own risk.

JTAG Isolator Compared with Other SEGGER Isolators

Isolator Isolated link Isolation Max. speed Price ex VAT
JTAG Isolator (this product) Probe to target, JTAG, 20-pin 0.1" 1kV DC, basic 4 MHz £226
SWD Isolator Probe to target, SWD and SWO, 20-pin 0.1" 1kV DC, basic 4 MHz £240
USB Isolator Host PC to probe, USB 3kV DC for 1s, basic USB Full-Speed, 12 Mbit/s £185
J-Trace Isolator J-Trace to target, JTAG, SWD, SWO and ETM trace, 19-pin 0.05" 1kV DC, basic 4 MHz debug, 75 MHz trace clock £320

Order the JTAG Isolator for £226 ex VAT. Confirm that your target debugs over JTAG at 4 MHz or below, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Isolation1kV DC, basic isolation
Host and Target Interface
Target interfaceJTAG
Target signalsTRST, TDI, TMS, TCK, RTCK, TDO, RESET
Target interface voltage1.2V to 5V
Probe-side connector20-pin 0.1" male JTAG
Target-side connector20-pin 0.1" male JTAG
Performance
Max. target interface speed4 MHz
Power
Power supplyPowered from the probe side
Target-side power consumption<25µA
Software and Compatibility
Compatible J-Link modelsPRO PoE, PRO, Ultra, WiFi, PLUS, BASE
Compatible Flasher modelsPRO, PRO XL, Compact, Portable PLUS
Physical
Dimensions (L x W x H)73mm x 46mm x 19mm
Weight38g
Environmental
Operating temperature+5°C to +60°C
Storage temperature-20°C to +65°C
Relative humidity<90% rH, non-condensing
Informations de commande
Référence (SKU)8.07.00
FabricantSEGGER Microcontroller GmbH
EAN5055383620111
Garantie12 mois
Poids d'expédition0.05 kg
  • 1 ×JTAG Isolator Box
  • 1 ×0.1" 20-pin ribbon cable
  • SEGGER J-Link ARM JTag IsolatorSEGGER J-Link JTAG Isolator user manual providing setup instructions, connection diagrams, and electrical specifications. Features 1kV DC isolation, 3.3V/5V target... PDF89 KB · Aug 2008
    Détails
Questions à nos ingénieurs

Questions et réponses

3 questions
  • Can I Use the JTAG Isolator for SWD?

    No. It does not support bidirectional transmission on the SWDIO pin, so SWD will not work through it. SEGGER offers the SWD Isolator for SWD targets.

    Answered by John LeggUpdated 16 Nov 2026
  • Is It Rated for Hazardous Voltages?

    Not on its own. It provides 1kV DC basic isolation only, and SEGGER states that hazardous voltages need a further protection measure, such as double or reinforced isolation.

    Answered by John LeggUpdated 16 Nov 2026
  • Should I Isolate on the Target Side or the USB Side?

    Target-side isolation with the JTAG Isolator allows the host USB link to run at Hi-Speed on J-Link models that support it, but limits the debug speed to 4 MHz. The USB Isolator isolates the host side instead and forces USB Full-Speed, which SEGGER says does not, or not significantly, reduce debug and flash programming speed.

    Answered by John LeggUpdated 16 Nov 2026

Vous ne trouvez pas votre réponse ? Posez la question à nos ingénieurs.

Poser une question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.