Passer aux informations produits
1 de 2

SEGGER Microcontroller GmbH

Adaptateur FPGA Intel SEGGER

Adaptateur FPGA Intel SEGGER

Se connecte au connecteur Intel FPGA JTAG à 10 broches offrant un accès de débogage aux cœurs MCU basés sur FPGA comme l'ARM Cortex-A9 double cœur dans les appareils Cyclone V.

SKU: 8.06.15

Prix habituel
£60.00 exc VAT
£72.00 inc VAT
Prix habituel Prix promotionnel
£60.00 exc VAT
£72.00 inc VAT
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Moyens de paiement

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Afficher tous les détails

Overview

The Intel FPGA Adapter, formerly the J-Link Altera Adapter, connects a J-Link or Flasher to the 10-pin 100-mil Intel FPGA JTAG connector. It gives debug access to MCU cores inside the FPGA, such as the dual-core ARM Cortex-A9 in Cyclone V devices. It is for firmware engineers debugging the hard processor system on Intel SoC FPGA boards.

The SEGGER Intel FPGA Adapter (part number 8.06.15, formerly the J-Link Altera Adapter) connects a J-Link or Flasher to the 10-pin 100-mil Intel FPGA JTAG connector, giving debug access to MCU cores inside the FPGA such as the dual-core ARM Cortex-A9 in Cyclone V devices. SEGGER's shop lists it with a 10-pin ribbon cable. It is for firmware engineers debugging the hard processor system on Intel SoC FPGA boards with the J-Link they already use.

J-Link Debug for Cortex-A9 Cores in Intel SoC FPGAs

The adapter converts the standard J-Link 20-pin 0.1" connector found on most J-Link models to the Intel FPGA 10-pin JTAG layout. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, TDO and RESET. SEGGER's Knowledge Base page for the Arria 10 SoC Development Kit lists the board's JTAG connector J24 as connected "via Intel FPGA Adapter", so the same adapter covers Cyclone V and Arria 10 SoC development hardware. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.

Suitable J-Link and Flasher Models

SEGGER lists the Intel FPGA Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.

Specifications

Probe side J-Link 20-pin, 0.1"
Target side Intel FPGA 10-pin, 100-mil JTAG
Signals (SEGGER schematic) VTref, TRST, TDI, TMS, TCK, TDO, RESET
Example targets Cyclone V (dual-core ARM Cortex-A9); Arria 10 SoC Development Kit (J24)
Former name J-Link Altera Adapter
Part number 8.06.15

What's Included

  • Intel FPGA Adapter
  • 10-pin ribbon cable

As listed in SEGGER's shop ("Incl. 10 pin ribbon cable").

Limitations

  • JTAG only; SEGGER's schematic shows no SWD signals.
  • SEGGER describes it for debug access to MCU cores in the FPGA; it does not list FPGA configuration.
  • For the 14-pin 2mm Xilinx JTAG connector (Zynq), use the Xilinx Adapter.

Intel FPGA Adapter Compared with Related Adapters

Adapter Target connector Typical targets Price ex VAT
Intel FPGA Adapter (this product) 10-pin, 100-mil Intel FPGA JTAG Cortex-A9 in Cyclone V £60
Xilinx Adapter 14-pin, 2mm Xilinx JTAG Cortex-A9 in Zynq £60
14-Pin TI Adapter TI 14-pin JTAG, 0.1" TI MCUs, e.g. OMAP3530 £62
Flying Wire Adapter 10-pin row for flying wires Prototypes, non-standard pinouts £95

Order the Intel FPGA Adapter for £60 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Probe sideJ-Link 20-pin, 0.1"
Part number8.06.15
Host and Target Interface
Target sideIntel FPGA 10-pin, 100-mil JTAG
Signals (SEGGER schematic)VTref, TRST, TDI, TMS, TCK, TDO, RESET
Example targetsCyclone V (dual-core ARM Cortex-A9); Arria 10 SoC Development Kit (J24)
Physical
Former nameJ-Link Altera Adapter
Ordering information
Part number (SKU)8.06.15
ManufacturerSEGGER Microcontroller GmbH
EAN5055383614486
Warranty12 mois
Shipping weight0.02 kg
  • 1 ×Intel FPGA Adapter
  • 1 ×10-pin ribbon cable
Questions à nos ingénieurs

Questions et réponses

2 questions
  • Which Adapter Do I Need for a Xilinx Zynq Board?

    The Xilinx Adapter, which fits the 14-pin 2mm Xilinx JTAG connector. The Intel FPGA Adapter fits only the Intel 10-pin 100-mil JTAG connector.

    Answered by John LeggUpdated 16 Nov 2026

Vous ne trouvez pas votre réponse ? Posez la question à nos ingénieurs.

Poser une question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.