
Caractéristiques principales
Overview
The SEGGER Flying Wire Adapter (8.06.27) plugs onto the 20-pin 0.1" connector of a J-Link or Flasher and brings the debug signals out to a 10-pin row, so each one can be wired to the target with a flying wire. It is used on prototype boards that have no debug connector yet, and to connect a J-Link by hand to ST Discovery boards.
The SEGGER Flying Wire Adapter (part number 8.06.27) adapts the standard 20-pin 0.1" J-Link connector to a 10-pin row, so a J-Link or Flasher can be wired to a target PCB with flying wires. SEGGER describes it as especially useful for prototype hardware where no final debug connector has been chosen yet, and for connecting a J-Link by hand to ST Discovery boards. It suits early bring-up, when the debug signals sit on test points or pin headers in no standard order.
Wire J-Link to Any Target Point
Instead of a fixed connector, the adapter breaks the J-Link signals out to a 10-pin row, and each wire goes wherever the target exposes that signal. SEGGER's schematic shows VTref, TRST, TDI, TMS, TCK, RTCK, TDO, RESET, pin 17 and VSUPPLY on the 10-pin row, with GND on a separate 3-pin header. The board is printed TMS/SWDIO, TCK/SWCLK and TDO/SWO, so the same row serves JTAG and SWD wiring. The probe side is the standard J-Link 20-pin 0.1" connector found on most J-Link models. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.
Suitable J-Link and Flasher Models
SEGGER lists the Flying Wire Adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.
Specifications
| Probe side | J-Link 20-pin, 0.1" |
|---|---|
| Target side | 10-pin signal row and 3-pin GND header, for flying wires |
| Signals (SEGGER schematic and board print) | 10-pin row, J-Link pin in brackets: VTref (1), TRST (3), TDI (5), TMS/SWDIO (7), TCK/SWCLK (9), RTCK (11), TDO/SWO (13), RESET (15), pin 17 (17), VSUPPLY (19). 3-pin header: GND |
| Intended use | Prototype hardware without a final connector; manual connection to ST Discovery boards |
| Part number | 8.06.27 |
What's Included
SEGGER publishes no box list for this adapter. Its product page pictures a set of coloured jumper wires alongside the board, but neither that page nor SEGGER's shop states how many wires are supplied.
Limitations
- Hand wiring suits the bench, not repeat connection in production; for a header-free board in volume, the 10-Pin Needle Adapter fits a fixed footprint.
- SEGGER publishes no wire count, wire length or electrical specification.
- For a 10-pin 0.05" header with a non-standard pinout, the 50-Mil 10-Pin Patch Adapter keeps a connector on the target side.
Flying Wire Adapter Compared with Related Adapters
| Adapter | Target connection | Best for | Price ex VAT |
|---|---|---|---|
| Flying Wire Adapter (this product) | 10-pin row for flying wires | Prototypes, ST Discovery boards | £95 |
| 50-Mil 10-Pin Patch Adapter | 10-pin, 0.05" header | Non-standard 10-pin pinouts | £66 |
| Measurement Patch Adapter | 20-pin 0.1" header, with colour-coded jumper wires and test points | Custom connections with signal checks | £130 |
Order the Flying Wire Adapter for £95 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Probe side | J-Link 20-pin, 0.1" |
| Intended use | Prototype hardware without a final connector; manual connection to ST Discovery boards |
| Part number | 8.06.27 |
| Host and Target Interface | |
| Target side | 10-pin signal row and 3-pin GND header, for flying wires |
| Signals (SEGGER schematic and board print) | 10-pin row, J-Link pin in brackets: VTref (1), TRST (3), TDI (5), TMS/SWDIO (7), TCK/SWCLK (9), RTCK (11), TDO/SWO (13), RESET (15), pin 17 (17), VSUPPLY (19). 3-pin header: GND |
| Ordering information | |
| Part number (SKU) | 8.06.27 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383614509 |
| Warranty | 12 mois |
| Shipping weight | 0.02 kg |
-
1 ×
Adaptateur de fil volant SEGGER
Contact us to confirm the full contents of the box.
Questions et réponses
-
Can I Use It with an ST Discovery Board?
Yes. SEGGER names manual connection of a J-Link to ST Discovery boards as one of the adapter's uses.
-
Flying Wire or Measurement Patch Adapter?
The Flying Wire Adapter is the simple breakout for wiring to a prototype. The Measurement Patch Adapter adds colour-coded jumper wires and test points for signal identification and signal integrity checks.
-
Does It Support SWD as Well as JTAG?
Yes. The board is printed TMS/SWDIO, TCK/SWCLK and TDO/SWO on J-Link pins 7, 9 and 13, so the same 10-pin row is wired for either JTAG or SWD.
No questions match your search.