Carte à clic Thermo 29
Carte à clic Thermo 29
Key Features:
- Haute précision, large plage de températures, haute résolution, interface SPI, intervalles de mesure rapides sans auto-échauffement, fonctionnalités avancées pour une fiabilité accrue, alerte programmable, étalonné en usine, faible consommation d'énergie, etc.
- Basé sur le TMP126 - capteur de température à sortie numérique de Texas Instruments
- Peut être utilisé pour la gestion thermique de l'électronique portable et des applications industrielles, grand public et environnementales
- mikroBUS : interface SPI
Le Thermo 29 Click Board™ : des mesures de température précises et faciles
Le Thermo 29 Click Board™ est la solution idéale pour tous ceux qui ont besoin de mesures de température précises et fiables. Avec sa conception compacte et ses fonctionnalités avancées, cette carte est indispensable pour diverses applications.
Précision supérieure avec le capteur TMP126
Au cœur du Thermo 29 Click Board™, le TMP126 est un capteur de température numérique exceptionnel fabriqué par Texas Instruments. Ce capteur de haute précision combine un capteur thermique BJT calibré en interne, un ADC 14 bits et un processeur de signal numérique pour offrir une précision inégalée.
Avec une précision impressionnante de ±0,25°C et une résolution de température de 0,03125°C par LSB, le TMP126 vous garantit des mesures de température précises. Que vous surveilliez des processus industriels, optimisiez la gestion thermique des appareils électroniques ou travailliez sur des applications environnementales, le Thermo 29 Click Board™ est là pour vous.
Restez vigilant grâce à la fonctionnalité d'alarme programmable
Le Thermo 29 Click Board™ va au-delà de la mesure de température en proposant une fonction d'alarme programmable. Cette fonction vous permet de définir des seuils de température spécifiques et de recevoir des signaux d'interruption sur votre unité de microcontrôleur (MCU) lorsque ces seuils sont dépassés.
Vous pouvez réagir rapidement aux événements de température critiques et prendre les mesures appropriées en exploitant la fonction d'alarme programmable. Qu'il s'agisse d'éviter la surchauffe des appareils électroniques portables ou de maintenir des conditions de fonctionnement optimales dans les systèmes industriels, le Thermo 29 Click Board™ vous aide à garder le contrôle.
Développement de logiciels simplifié avec prise en charge de mikroSDK
Le développement de logiciels pour la carte Click Board™ Thermo 29 est un jeu d'enfant grâce à sa bibliothèque compatible mikroSDK. Cette bibliothèque complète fournit un ensemble de fonctions qui simplifient l'intégration de la carte Click Board™ dans votre système.
En utilisant la bibliothèque compatible mikroSDK, vous pouvez économiser un temps et des efforts précieux lors du développement de logiciels. Le Thermo 29 Click Board™ est un produit entièrement testé et prêt à l'emploi, garantissant une expérience transparente lorsqu'il est intégré à tout système équipé du célèbre socket mikroBUS™.
Ne vous contentez pas de mesures de température moins précises et fiables. Procurez-vous dès aujourd'hui le Thermo 29 Click Board™ et découvrez la différence qu'il apporte en matière de gestion thermique dans diverses applications !
How Does The Thermo 29 Click Board™ Work?
The Thermo 29 Click Board™ is based on the TMP126, a digital output temperature sensor from Texas Instruments with increased reliability and improved accuracy specifications optimal for thermal management and protection applications. The TMP126 consists of an internal thermal BJT (factory calibrated on a NIST traceable setup), a high-resolution analog-to-digital converter (ADC), a data processing circuit, and serial interface logic functions in one package. The voltage is digitized and converted to a 14-bit temperature result in degrees Celsius, giving a fully calibrated digital output with outstanding accuracy of up to ±0.25°C and temperature resolution of 0.03125°C per LSB, typical over a temperature range of 20°C to 30°C.
This Click board™ communicates with MCU using a 3-wire SPI-compatible interface with a maximum frequency of 10MHz, for data transfer and configuration of the TMP126. Using the Mode bit in the configuration register, the TMP126 can be configured to operate in various conversion modes, including continuous, one-shot, and shutdown modes. These modes provide flexibility to use the board in the most power-efficient way necessary for the intended application.
The TMP126 also includes advanced features for increased reliability in harsh environments. These include an optional CRC checksum for data integrity, programmable alert limits, a temperature slew rate warning, and an enhanced operating temperature range. An alarm (interrupt) signal, marked as ALR and routed to the interrupt pin of the mikroBUS™ socket, is alarming when a specific temperature event occurs that depends on the value of the temperature reading relative to programmable limits. In addition to the ALR pin, this function can be visually identified by a red LED marked as ALERT.
The Thermo 29 Click Board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type | Temperature & humidity |
Applications | Can be used for the thermal management of portable electronics and industrial, consumer, and environmental applications |
On-board modules | TMP126 - digital output temperature sensor from Texas Instruments |
Key Features | High accuracy, broad temperature range, high resolution, SPI interface, fast measurement intervals with no self-heating, advanced features for increased reliability, programmable alert, factory-calibrated, low power consumption, and more |
Interface | SPI |
Compatibility | mikroBUS |
Click board size | S (28.6 x 25.4 mm) |
Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on Thermo 29 Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | NC | ||
NC | 2 | RST | INT | 15 | ALR | Alert Interrupt | |
SPI Chip Select | CS | 3 | CS | RX | 14 | NC | |
SPI Clock | SCK | 4 | SCK | TX | 13 | NC | |
SPI Data OUT | SDO | 5 | MISO | SCL | 12 | NC | |
SPI Data IN | SDI | 6 | MOSI | SDA | 11 | NC | |
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
LD2 | ALERT | - | Alert LED Indicator |
JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
THERMO 29 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | 3.3 | - | 5 | V |
Temperature Accuracy | -0.3 | - | 0.3 | deg |
Temperature Resolution | - | 0.03125 | - | °C/LSB |
Temperature Range | -20 | +25 | +85 | °C |
Software Support
We provide a library for the Thermo 29 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Thermo 29 Click Board™ driver.
Key functions
-
thermo29_read_unique_id
This function reads the device unique ID words (6 bytes in total). -
thermo29_get_alert_pin
This function returns the alert pin logic state. -
thermo29_read_temperature
This function reads the temperature measurement in degrees Celsius.
Example Description
This example demonstrates the use of the Thermo 29 Click Board™ by reading and displaying the temperature measurements.
void application_task ( void )
{
float temperature;
// Wait for the data ready alert flag
while ( thermo29_get_alert_pin ( &thermo29 ) );
if ( ( THERMO29_OK == thermo29_clear_alert_status ( &thermo29 ) ) &&
( THERMO29_OK == thermo29_read_temperature ( &thermo29, &temperature ) ) )
{
log_printf ( &logger, " Temperature: %.2f degCrnn", temperature );
}
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Thermo29
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroE compilers.
MIKROSDK
Thie Thermo 29 Click Board™ is supported with mikroSDK - MikroE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Carte à clic Thermo 29
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.