Mikroelektronika d.o.o.
Panneau de clic pour moniteur VCT
Panneau de clic pour moniteur VCT
Impossible de charger la disponibilité du service de retrait
La carte Click Board™ VCT Monitor est une carte complémentaire compacte qui contient une solution de surveillance hautement intégrée sans compromettre la précision. Cette carte comprend le LTC2990, un moniteur de température, de tension et de courant hautes performances configurable I2C d'Analog Devices. Le LTC2990 intègre un ADC 14 bits et une référence de tension de 10 ppm/°C pour fournir une résolution de tension inférieure au millivolt, ainsi qu'une précision de +1°C en interne et de +0,5°C à distance lors des mesures de température. Cette carte Click Board™ convient aux applications telles que la surveillance de la tension d'alimentation et la mesure de la température des diodes à distance, par exemple dans les systèmes industriels où la gestion thermique est cruciale pour maximiser les performances.
Le VCT Monitor Click est pris en charge par une bibliothèque compatible mikroSDK, qui comprend des fonctions qui simplifient le développement logiciel. Ce Click Board™ est un produit entièrement testé, prêt à être utilisé sur un système équipé du socket mikroBUS™.
How Does The VCT Monitor Click Board™ Work?
The VCT Monitor Click Board™ is based on the LTC2990, a high-performance temperature, voltage, and current monitor with the I2C serial interface from Analog Devices. The LTC2990 can be configured to measure many combinations of internal temperature, remote temperature, remote voltage or current, and internal VCC with single or repeated measurements. It fits in systems needing sub-millivolt voltage resolution, 1% current measurement, and 1°C temperature accuracy or any combination of the three.
The input signals are selected with an input MUX, controlled by the control logic block. The control logic uses the mode bits in the control register to manage the sequence and types of data acquisition. The control logic also controls the variable current sources during remote temperature acquisition. The ADC performs the necessary conversion(s) and supplies the data to the control logic for further processing in the case of temperature measurements or routing to the appropriate data register for voltage and current measurements.
Remote measurements are performed on terminals labelled as TEMP and LOAD using multiple ADC conversions and source currents to compensate for sensor series resistance. The LTC2990 is calibrated to yield the correct temperature for a remote diode with an ideality factor of 1.004.
The VCT Monitor Click Board™ is designed to be operated with both 3.3V and 5V logic voltage levels that can be selected via VCC SEL jumper. This allows for both 3.3V and 5V capable MCUs to use the I2C communication lines properly. However, the Click board™ comes equipped with a library that contains easy to use functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
| Type | Current sensor |
| Applications | Can be used for applications like supply voltage monitoring and remote diode temperature measurement, e.g., in industrial systems where thermal management is crucial for maximizing performance. |
| On-board modules | The VCT Monitor Click Board™ is based on the LTC2990, a high-performance temperature, voltage, and current monitor with the I2C serial interface from Analog Devices. |
| Key Features | Low power consumption, high precission |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the VCT Monitor Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VCC SEL | Left | Power Supply Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2-JP3 | ADDR SEL | Left | I2C Address Selection: Left position 0, Right position 1 |
VCT MONITOR CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | -0.3 | - | 6 | V |
| Accuracy (Local) | - | - | ±3.5 | °C |
| Accuracy (Remote) | - | - | ±1.5 | °C |
| Resolution | - | 14 | - | bits |
| Operating Temperature Range | 0 | - | 70 | °C |
Software Support
We provide a library for the VCT Monitor Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
The library contains a basic functions for using the VCT Monitor Click Board™.
Key Functions
float vctmonitor_read_voltage_differential ( void )- Differential voltage functionfloat vctmonitor_read_current ( void )- Current functionfloat vctmonitor_read_temperature ( void )- Temperature function
Example Description
The application is composed of three sections :
- System Initialization - Initializes I2C module
- Application Initialization - Initializes driver init
- Application Task - Reads temperature, current value, and differential voltage every 4 seconds.
- note - We used the next sets for the test: - Power supply - 4V - Current (Load) - 0A to 3A - The temperature reads from the external MMBT3904 sensor
void application_task ( ) { float temperature; float voltage; float current; current = vctmonitor_read_current( ); FloatToStr( current,demo_text ); mikrobus_logWrite( "Current: ",_LOG_TEXT ); mikrobus_logWrite( demo_text,_LOG_TEXT ); mikrobus_logWrite( "mA",_LOG_LINE ); voltage = vctmonitor_read_voltage_differential( ); FloatToStr( voltage,demo_text ); mikrobus_logWrite( "Voltage: ",_LOG_TEXT ); mikrobus_logWrite( demo_text,_LOG_TEXT ); mikrobus_logWrite( "mV",_LOG_LINE ); temperature = vctmonitor_read_temperature(); FloatToStr( temperature, demo_text ); mikrobus_logWrite( "Temperature: ", _LOG_TEXT ); mikrobus_logWrite( demo_text, _LOG_TEXT); mikrobus_logWrite( "C",_LOG_LINE ); mikrobus_logWrite("_________________",_LOG_LINE); Delay_ms( 4000 ); }The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- I2C Library
- Conversions Library
- UART Library
Additional Notes and Information
Depending on the development board you are using, you may need USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The VCT Monitor Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Panneau de clic pour moniteur VCT
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.