Mikroelektronika d.o.o.
Carte à clic CAN FD 5
Carte à clic CAN FD 5
Impossible de charger la disponibilité du service de retrait
La carte Click Board™ CAN FD 5 est une carte complémentaire compacte qui contient un émetteur-récepteur CAN haute vitesse qui prend en charge les types de protocole CAN et CAN FD. Cette carte comprend l'UJA1162A, un émetteur-récepteur CAN haute vitesse auto-alimenté intégrant un émetteur-récepteur CAN conforme aux normes ISO 11898-2:2016 et SAE J2284-1 à SAE J2284-5 avec mode veille de NXP Semiconductors. Il prend en charge de nombreuses fonctionnalités supplémentaires telles que la détection de sous-tension, le contrôle de mode via une seule broche GPIO, la capacité de réveil à distance et locale, l'arrêt en cas de surchauffe et un courant de repos très faible en mode veille. Cette carte Click Board™ convient aux réseaux CAN HS dans les applications automobiles et aux réseaux dans les applications industrielles, dans la direction assistée électrique (EPS), la climatisation CVC, le système de surveillance de la pression des pneus (TPMS) et bien d'autres.
La carte Click Board™ CAN FD 5 est prise en charge par une bibliothèque compatible mikroSDK, qui comprend des fonctions qui simplifient le développement logiciel. Cette carte Click Board™ est un produit entièrement testé, prêt à être utilisé sur un système équipé de la prise mikroBUS™.
How Does The CAN FD 5 Click Board™ Work?
The CAN FD 5 Click Board™ is based on the UJA1162A, a 'self-supplied' high-speed (HS) CAN transceiver integrating an ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant CAN transceiver with Sleep Mode from NXP Semiconductors. The UJA1162A provides reliable communication at data rates up to 5 Mbit/s in the CAN FD HS phase, and can be operated in a very low-current Sleep mode with local and bus wake-up capability. A variety of fail-safe and diagnostic features offer enhanced system reliability and advanced power management. The HS CAN transceiver UJA1162A includes a receiver and a transmitter unit, allowing the transceiver to send data to the bus medium and monitors the data from the bus medium at the same time.
The UJA1162A supports five different operating modes: Normal, Standby, Sleep, Overtemp, and Off. Each mode has specific characteristics in terms of quiescent current, data transmission, or failure diagnostic. When the transceiver is in Sleep Mode, the pin routed to the external regulator TLS850B0TBV33 positioned on the back of the Click board™, will be turned off, reducing the power consumption of the external elements. Outputs of those LDOs are routed through the SMD jumpers that can be populated so that the LDOs can be used to power up the mikroBUS™ 3.3V and 5V power rails. However, it should be noted that MikroE does not advise powering up their systems this way - that is why these jumpers are left unpopulated by default.
The CAN FD 5 Click Board™ communicates with MCU using the UART interface with the default baud rate of 9600 bps for the data transfer, while the GPIO pins on this Click board™ are used for Sleep Mode control, local wake-up, and an interrupt for CAN transceiver status. CS pin of the mikroBUS™ socket labelled as the SLP can be used for switching between Normal and Stand-By/Sleep Mode by toggling this pin. It also has a Local Wake-Up function routed to the PWM pin on the mikroBUS™, labelled as WAK, which will cause the transition of UJA1162A from Stand-By/Sleep Mode into Normal Mode. Alongside these pins, this Click board™ possesses an interrupt pin labelled as CTS used to indicate to MCU that the transceiver is fully enabled and data can be transmitted and received via the UART TX/RX pins. It is also possible for the user to connect the TX/RX signals of UART communication directly through the UART External header on the left edge of the board.
The CAN FD 5 Click Board™ is designed to be operated with both 3.3V and 5V logic voltage levels that can be selected via VIO SEL jumper. This allows for both 3.3V and 5V capable MCUs to use the UART communication lines properly. However, the Click board™ comes equipped with a library that contains easy to use functions and an example code that can be used as a reference for further development.
SPECIFICATIONS
| Type | CAN |
| Applications | Can be used for a HS CAN networks in automotive applications and networks in industrial applications, in electric power steering (EPS), HVAC climate control, tire pressure monitoring system (TPMS), and many more. |
| On-board modules | The CAN FD 5 Click Board™ is based on the UJA1162A, a 'self-supplied' high-speed (HS) CAN transceiver integrating an ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant CAN transceiver with Sleep Mode from NXP Semiconductors. |
| Key Features | Under-voltage detection, remote and local wake-up capability, overtemperature shutdown, and a very low quiescent current in Sleep mode, and more. |
| Interface | UART |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the CAN FD 5 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | WAK | Wake-Up | |
| NC | 2 | RST | INT | 15 | CTS | CAN Status | |
| Sleep Mode Control | SLP | 3 | CS | RX | 14 | RX | UART RX |
| NC | 4 | SCK | TX | 13 | TX | UART TX | |
| NC | 5 | MISO | SCL | 12 | NC | ||
| NC | 6 | MOSI | SDA | 11 | NC | ||
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| JP1 | VIO SEL | Left | Power Supply Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JMPR1 - JMPR2 | - | Unpopulated | 3V3/5V LDO Jumpers |
CAN FD 5 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | -0.2 | - | +6 | V |
| Communication Data Rates | - | - | 5 | Mbit/s |
| Voltage between CANH and CANL pins | -24 | - | +40 | V |
| Operating Temperature Range | -40 | - | +125 | sa |
Software Support
We provide a library for the CAN FD 5 Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
The library covers all the necessary functions to control the CAN FD 5 Click Board™. Library performs a standard UART communication.
Key Functions
void canfd5_write_byte ( uint8_t input )- Write Single Byte.void canfd5_set_normal_operating_mode ( void )- Set normal operating mode function.void canfd5_set_operating_mode ( uint8_t op_mode )- Set operating mode function.
Example Description
The application is composed of three sections :
- System Initialization - Initializes UART, sets CS and PWM pins as output and INT pin as input.
- Application Initialization - Initialization driver enables - UART, performs an normal operating mode, also write log.
- Application Task - (code snippet) This is an example that demonstrates the use of the CAN FD 5 Click Board™. This application task writes message data via UART every 3 seconds. Results are being sent to the USART Terminal where you can track their changes.
void application_task ( )
{
mikrobus_logWrite( "----------------------", _LOG_LINE );
mikrobus_logWrite( "", _LOG_LINE );
canfd5_write_data( &demo_message_data[ 0 ] );
mikrobus_logWrite( " TX Data: ", _LOG_TEXT );
mikrobus_logWrite( demo_message_data, _LOG_LINE );
Delay_ms( 3000 );
}
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- UART
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click Board™ or RS232 Click Board™ to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The CAN FD 5 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Software Support
We provide a library for the CAN FD 5 Click Board™ on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Library Description
The library covers all the necessary functions to control the CAN FD 5 Click Board™. Library performs a standard UART communication.
Key Functions
void canfd5_write_byte ( uint8_t input )- Write Single Byte.void canfd5_set_normal_operating_mode ( void )- Set normal operating mode function.void canfd5_set_operating_mode ( uint8_t op_mode )- Set operating mode function.
Example Description
The application is composed of three sections :
- System Initialization - Initializes UART, sets CS and PWM pins as output and INT pin as input.
- Application Initialization - Initialization driver enables - UART, performs an normal operating mode, also write log.
- Application Task - (code snippet) This is an example that demonstrates the use of the CAN FD 5 Click Board™. This application task writes message data via UART every 3 seconds. Results are being sent to the USART Terminal where you can track their changes.
void application_task ( )
{
mikrobus_logWrite( "----------------------", _LOG_LINE );
mikrobus_logWrite( "", _LOG_LINE );
canfd5_write_data( &demo_message_data[ 0 ] );
mikrobus_logWrite( " TX Data: ", _LOG_TEXT );
mikrobus_logWrite( demo_message_data, _LOG_LINE );
Delay_ms( 3000 );
}
The full application code, and ready to use projects can be found on our LibStock page.
Other mikroE Libraries used in the example:
- UART
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click Board™ or RS232 Click Board™ to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The CAN FD 5 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Carte à clic CAN FD 5
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.