Mikroelektronika d.o.o.
Tableau sécurisé à 3 clics
Tableau sécurisé à 3 clics
Impossible de charger la disponibilité du service de retrait
Overview
La carte Secure 3 Click Board™ est équipée de l'ATSHA204A, un coprocesseur cryptographique avec stockage de clés sécurisé basé sur le matériel de Microchip. La carte Click Board™ est conçue pour fonctionner sur une alimentation de 3,3 V ou 5 V. La carte Secure 3 Click Board™ communique avec le microcontrôleur cible via une interface I2C.
REMARQUE : le Secure 3 Click Board™ est livré avec des embases empilables qui vous permettent de le combiner plus facilement avec d'autres Click Boards™ en utilisant une seule prise mikroBUS.
The Secure 3 Click Board™ carries the ATSHA204A, a cryptographic coprocessor with secure hardware-based key storage from Microchip. The click is designed to run on either 3.3V or 5V power supply. The Secure 3 Click Board™ communicates with the target microcontroller over an I2C interface.
It is ideal to use for:
- Secure download and boot - authentication and protect code in-transit
- Ecosystem control - ensure only OEM/licensed nodes and accessories work
- Anti-cloning - prevent building with identical BOM or stolen code
- Message security - authentication, message integrity, and confidentiality of network nodes (IoT)
NOTE: The Secure 3 Click Board™ comes with stacking headers which allow you to combine it with other clicks more easily by using just one mikroBUS™ socket.
ATSHA204A Features
The ATSHA204A is a member of the Microchip CryptoAuthentication™ family of high-security hardware authentication devices, which uses Secure Hash Algorithm (SHA-256) with 256-bit key length, message authentication code (MAC) and hash-based message authentication code (HMAC) options. It has a flexible command set that allows use in many applications.
The ATSHA204A device includes an Electrically Erasable Programmable Read-Only Memory (EEPROM) array that can be used for key storage, miscellaneous read/write data, read-only, secret data, consumption logging, and security configuration. Access to the various sections of memory can be restricted in a variety of ways, and the configuration can then be locked to prevent changes.
SPECIFICATIONS
| Type | Encryption |
| Applications | The Secure 3 Click Board™ can be used for the storage of certificates, miscellaneous read/write, read-only or secret data, consumption logging, and security configurations |
| On-board modules | ATSHA204A - a cryptographic coprocessor with secure hardware-based key storage |
| Key Features | Superior SHA-256 hash algorithm with 256-bit key length, message authentication code (MAC) and hash-based message authentication code (HMAC) options, storage for up to sixteen keys |
| Interface | I2C |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the Secure 3 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | TX | 14 | NC | ||
| NC | 4 | SCK | RX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C data | |
| Power supply | +3.3V | 7 | 3.3V | 5V | 10 | +5V | Power supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
JUMPERS AND SETTINGS
| Designator | Name | Default Position | Default Option | Description |
|---|---|---|---|---|
| JP1 | VIO SEL. | Left | 3V3 | Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V |
Software Support
Code examples for the Secure 3 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet creates a MAC for a given input and then checks if it is valid using verify function.
01 static void MACTest ()
02 {
03 //Generates nonce for use in MAC generation
04 memset (bufferIn, 0x45, 128);
05 if (atcab_nonce(bufferIn) == ATCA_SUCCESS)
06 {
07 LOG( "rnrn Nonce generated." );
08 }
09 else LOG( "rnrn Nonce generation failed..." );
10 delay_ms (1500);
11
12 //Generates MAC for given input
13 memset (bufferOut, 0x00, 128);
14 memset (bufferIn, 0x14, 128);
15 if (atcab_mac( 0, 0, bufferIn, bufferOut ) == ATCA_SUCCESS)
16 {
17 LOG( "rnrn MAC generated: " );
18 outputHex (bufferOut, 32);
19 }
20 else LOG( "rnrn Mac generation failed..." );
21 delay_ms (1500);
22
23 //Checks if the generated MAC is valid
24 memset (bufferIn, 0x14, 128);
25 if (atcab_checkmac( 0, 0, bufferIn, bufferOut, otherData) == ATCA_SUCCESS)
26 {
27 LOG( "rnrn Check MAC successful. " );
28 }
29 else LOG( "rnrn Check MAC failed..." );
30 }
Software Support
Code examples for the Secure 3 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet creates a MAC for a given input and then checks if it is valid using verify function.
01 static void MACTest ()
02 {
03 //Generates nonce for use in MAC generation
04 memset (bufferIn, 0x45, 128);
05 if (atcab_nonce(bufferIn) == ATCA_SUCCESS)
06 {
07 LOG( "rnrn Nonce generated." );
08 }
09 else LOG( "rnrn Nonce generation failed..." );
10 delay_ms (1500);
11
12 //Generates MAC for given input
13 memset (bufferOut, 0x00, 128);
14 memset (bufferIn, 0x14, 128);
15 if (atcab_mac( 0, 0, bufferIn, bufferOut ) == ATCA_SUCCESS)
16 {
17 LOG( "rnrn MAC generated: " );
18 outputHex (bufferOut, 32);
19 }
20 else LOG( "rnrn Mac generation failed..." );
21 delay_ms (1500);
22
23 //Checks if the generated MAC is valid
24 memset (bufferIn, 0x14, 128);
25 if (atcab_checkmac( 0, 0, bufferIn, bufferOut, otherData) == ATCA_SUCCESS)
26 {
27 LOG( "rnrn Check MAC successful. " );
28 }
29 else LOG( "rnrn Check MAC failed..." );
30 }
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.