Mikroelektronika d.o.o.
Tableau de bord sécurisé à 2 clics
Tableau de bord sécurisé à 2 clics
Impossible de charger la disponibilité du service de retrait
Key Features
- Dispositif d'élément cryptographique avec stockage de clé sécurisé basé sur le matériel, bits OTP (One Time Programmable) de 512 bits pour les informations fixes
- Basé sur l'ATAES132A - un coprocesseur cryptographique avec stockage de clés sécurisé basé sur le matériel de Microchip
- Utilisé pour le stockage jusqu'à 16 clés, certificats, lecture/écriture diverses, données en lecture seule ou secrètes, journalisation de la consommation et configurations de sécurité
- mikroBUS : interface I2C et SPI
La carte Secure 2 Click Board™ est équipée de l'ATAES132A, un coprocesseur cryptographique avec stockage de clés sécurisé basé sur le matériel de Microchip. La carte Click Board™ est conçue pour fonctionner sur une alimentation de 3,3 V ou 5 V. La carte Secure 2 Click Board™ communique avec le microcontrôleur cible via l'interface SPI et I2C, avec des fonctionnalités supplémentaires fournies par la broche INT sur la ligne mikroBUS.
The Secure 2 Click Board™ carries the ATAES132A, a cryptographic coprocessor with secure hardware-based key storage from Microchip. The click is designed to run on either 3.3V or 5V power supply. Secure 2 click communicates with the target microcontroller over SPI and I2C interface, with additional functionality provided by the INT pin on the mikroBUS™ line. The click comes with stackable headers so you can put another click on the top of it.
NOTE: The Secure 2 Click Board™comes with stacking headers which allow you to combine it with other clicks more easily by using just one mikroBUS™ socket.
ATAES132A FEATURES
The ATAES132A is a high-security, Serial Electrically-Erasable and Programmable Read-Only Memory (Serial EEPROM) providing both authentication and confidential nonvolatile data storage capabilities. Access restrictions for the 16 user zones are independently configured, and any key can be used with any zone. In addition, keys can be used for standalone authentication.
The AES-128 cryptographic engine operates in AES-CCM mode to provide authentication, stored data encryption/decryption, and Message Authentication Codes. Data encryption/decryption can be performed for internally stored data or for small external data packets, depending upon the configuration. Data encrypted by one ATAES132A device can be decrypted by another, and vice versa.
SPECIFICATIONS
| Type | Encryption |
| Applications | The Secure 2 Click Board™ can store up to 16 keys, certificates, miscellaneous read/write, read-only or secret data, consumption logging, and security configurations |
| On-board modules | ATAES132A - a cryptographic coprocessor with secure hardware-based key storage from Microchip |
| Key Features | Crypto element device with secure hardware-based key storage, 512 bit OTP (One Time Programmable) Bits for Fixed Information |
| Interface | I2C,SPI |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the Secure 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | AUTH | Auth signaling | |
| Chip select | CS | 3 | CS | TX | 14 | NC | |
| SPI clock | SCK | 4 | SCK | RX | 13 | NC | |
| Slave data out for SPI | SDO | 5 | MISO | SCL | 12 | SCL | I2C clock |
| Slave data in for SPI | SDI | 6 | MOSI | SDA | 11 | SDA | I2C data |
| Power supply | +3.3V | 7 | 3.3V | 5V | 10 | +5V | Power supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
Software Support
Code examples for the Secure 2 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet shows functions that will lock the configuration zone of the device and then output a generated random number.
01 //Configuration zone locking
02 if (aes132m_execute(AES132_LOCK, 0x02, 0x0000, 0x0000,
03 0, 0, 0, 0, 0, 0, 0, 0, txBuffer, rxBuffer)
04 == AES132_FUNCTION_RETCODE_SUCCESS)
05 {
06 LOG( "rnrn Configuration zone locked! " );
07 }
08 else
09 {
10 LOG( "rnrn Configuration zone locking failed" );
11 LOG( " or it is already locked." );
12 }
13 memset (txBuffer, 0, 84);
14 memset (rxBuffer, 0, 36);
15 /*
16 Fourth test - Random number generator
17 Will only return 0xA5 unless config zone is locked first.
18 */
19 if (aes132m_execute(AES132_RANDOM, 0x00, 0x0000, 0x0000,
20 0, 0, 0, 0, 0, 0, 0, 0, txBuffer, rxBuffer)
21 == AES132_FUNCTION_RETCODE_SUCCESS)
22 {
23 LOG( "rnrn Generated random number: " );
24 outputHex (&rxBuffer[2], 16);
25 }
26 else LOG( "rnrn Random number generation failed..." );
27
28 memset (txBuffer, 0, 84);
29 memset (rxBuffer, 0, 36);
Software Support
Code examples for the Secure 2 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.
CODE SNIPPET
The following code snippet shows functions that will lock the configuration zone of the device and then output a generated random number.
01 //Configuration zone locking
02 if (aes132m_execute(AES132_LOCK, 0x02, 0x0000, 0x0000,
03 0, 0, 0, 0, 0, 0, 0, 0, txBuffer, rxBuffer)
04 == AES132_FUNCTION_RETCODE_SUCCESS)
05 {
06 LOG( "rnrn Configuration zone locked! " );
07 }
08 else
09 {
10 LOG( "rnrn Configuration zone locking failed" );
11 LOG( " or it is already locked." );
12 }
13 memset (txBuffer, 0, 84);
14 memset (rxBuffer, 0, 36);
15 /*
16 Fourth test - Random number generator
17 Will only return 0xA5 unless config zone is locked first.
18 */
19 if (aes132m_execute(AES132_RANDOM, 0x00, 0x0000, 0x0000,
20 0, 0, 0, 0, 0, 0, 0, 0, txBuffer, rxBuffer)
21 == AES132_FUNCTION_RETCODE_SUCCESS)
22 {
23 LOG( "rnrn Generated random number: " );
24 outputHex (&rxBuffer[2], 16);
25 }
26 else LOG( "rnrn Random number generation failed..." );
27
28 memset (txBuffer, 0, 84);
29 memset (rxBuffer, 0, 36);
Tableau de bord sécurisé à 2 clics
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.