Aaronia AG
Aaronia IsoLOG 3D Mobile PRO
Aaronia IsoLOG 3D Mobile PRO
Impossible de charger la disponibilité du service de retrait
|
|
ISOLOG 3D® MOBILE 9030 PRO | ISOLOG 3D® MOBILE 9060 PRO | ISOLOG 3D® MOBILE 9080 PRO |
|---|---|---|---|
| Design | 3D (isotropic) | 3D (isotropic) | 3D (isotropic) |
| Frequency Range | 9kHz-3GHz | 9kHz-6GHz | 9kHz-6GHz |
| Internal Preamps | Two (+15dB each (@2GHz)) | Two (+15dB each (@2GHz)) | Two (+15dB each (@2GHz)) |
| Nominal impedance | 50 Ohm | 50 Ohm | 50 Ohm |
| Gain (typ.) | Up to 10dBi | Up to 10dBi | Up to 10dBi |
| RF-Connector | N Female/N Male | N Female/N Male | N Female/N Male |
| Dimensions (L/W/D) | 340 x 75 x 75 mm | 340 x 75 x 75 mm | 340 x 75 x 75 mm |
| Weight | 350g | 350g | 350g |
| Warranty | 2 years | 2 years | 2 years |
Each IsoLOG 3D Mobile includes an internal, rechargeable battery, offering a run-time of 6 hours, and two switchable low noise bypass preamplifier (+15dB each (@2GHz)). The integrated amp allows measurements of very low-powered signals. Thus, used in bypass mode, the antenna is still usable for high field-strengths. The control of the antenna is done via USB or via manual antenna selection mode, requiring no USB connection.
Made in Germany
All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standards so that Aaronia can offer every customer a full 2 years warranty for all EMC antennas.
Aaronia IsoLOG 3D Mobile PRO
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.