Charge électronique CC série Array 372XA
Charge électronique CC série Array 372XA
Programmable DC Electronic Load
SKU: 3722A
Prix habituel
€362,95 EUR
hors taxes
Prix habituel
Prix promotionnel
Prix unitaire
par
€362,95 EUR
hors taxes
If no stock shown above, order NOW to ship within 10 working days
Key Features
- Offers 8 basic test modes including CCL, CCH, CV, CRL, CRM, CRH, CPV, and CPC
- Programmable current slew rate
- Supports high-speed sequence and transient testing, as well as short-circuit and battery discharge tests
- Supports full remote control via RS232, with optional GPIB and USB interfaces
- Allows up to 10 steps of programming to be stored and controlled by a PC
Overview
La série de charges électroniques programmables Array Electronic 372XA est une gamme de charges électroniques CC programmables à entrée unique abordables avec une capacité de dissipation de 200 W à 400 W. Chaque charge électronique est équipée d'une interface RS-232C et comprend un câble USB vers RS-232C pour un contrôle externe.
High Reliability
- Protective circuitry provides over-current, over-voltage, over-power, over-temperature and reverse polarity protection to ensure the protection of the electronic load;
- A high-speed, power limiting circuit can limit input power rapidly when it is overloaded, thus there is no need to interrupt testing. Equipment adaptability to complicated operational environments is thereby greatly enhanced.
- A high-efficiency, intelligent cooling system can effectively reduce system temperature and enhance power density;
- The input binding posts with their innovative design are especially suitable for large current testing. They are easy to operate, reliable and durable;
- The specially ruggedized case with its rubber bumpers protects the load thus effectively prolonging the unit's service life.
Great Performance
- Circuit improvement greatly enhances the dynamic response of CR mode and widens the application scope of that mode;
- The innovative CP mode can test voltage sources, current sources, and effectively prevent short-circuits as well when the tested power is insufficient;
- The minimum operating voltage is less than 0.6V at the load's full rated current. With optional low-voltage testing devices, the maximum current can be achieved even though the input voltage is 0V. This is especially suitable for fuel cell, solar cell and other new energy test applications;
- By adopting an optimum design of calculation method and high-speed hardware circuitry, the D/A conversion rate can reach 100kHz. The overall smoothness of slope control has been raised, meanwhile, the timing precision and resolution of dynamic test and sequential test have also been improved;
- The 24-bit A/D and 17-bit D/A converters incorporated, provide this equipment with greatly enhanced setting and measurement resolution.
Multifunction
- Equipped with four basic test functions: CC, CV,CR, CP;
- High-speed transient operation with separate high/low lever time and rising/falling time control;
- Powerful sequential test function; with a minimum step time of 10us; and a maximum step time of 10000s. Cyclic numbers can be adjusted freely and a sequence can be chained to another sequence to achieve even more complex test procedures;
- Providing short-circuit test, battery discharge test and other auxiliary functions;
- Remote input terminals and external trigger input terminals are provided. The remote measurement can monitor the input signal automatically, and it is not necessary to change wiring or modify settings during operation;
- 10 groups of setup parameters can be saved, and providing automatic uploading of preset parameters;
- By supporting SCPI, it is easy to build an ATE (automatic test equipment) system that works with other programmable instruments via optional RS232, USB and GPIB interfaces.
Easy Operation
- Design optimized for portability and rugged reliability;
- Logical keypad design and convenient test operation;
- Easy-to-set test parameters coupled with a powerful sequence editing function;
- All electronic calibration - therefore no need to dismantle the equipment chassis;
- Firmware can be updated online.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.