Ir directamente a la información del producto
1 de 4

SEGGER Microcontroller GmbH

SEGGER J-Link Pro PoE Debug Probe

SEGGER J-Link Pro PoE Debug Probe

PoE-powered Ethernet/USB debug probe for automated test farms and remote debugging.

SKU: 8.12.28

Precio habitual
£1,320.00 exc VAT
£1,584.00 inc VAT
Precio habitual Precio de oferta
£1,320.00 exc VAT
£1,584.00 inc VAT
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Formas de pago

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Ver todos los detalles

Características principales

PoE-Powered Operation
Remote Target Power Control
High Download Throughput
Unlimited Flash Breakpoints
Built-In Web Interface & DHCP
VCOM For UART Logging
Broad IDE & MCU Support

Descripción general

Overview

The J-Link PRO PoE is SEGGER's J-Link PRO class probe with IEEE 802.3af Power over Ethernet, built for test farms and CI rigs where each probe sits on the LAN rather than beside a PC. It connects by 100 Mbit/s Ethernet or USB 2.0 Hi-Speed, runs at up to 50 MHz target interface speed with download speeds up to 4 MB/s, supplies the target with 5.25V at up to 1000mA when PoE powered, and includes J-Flash, Unlimited Flash Breakpoints, Ozone and RDI licences. For Ethernet without PoE see the J-Link PRO.

How It Connects

This J-Link uses SEGGER's standard 20-pin 0.1" (2.54 mm) JTAG/SWD connector, used on every J-Link except the J-Link EDU mini. For SWD you need VTref (pin 1), SWDIO (pin 7), SWCLK (pin 9), nRESET (pin 15) and GND (pin 4), plus SWO (pin 13) if you want trace output. Full JTAG, SWD, cJTAG and SPI pin tables, and the adapters for 10-pin 0.05" Cortex Debug headers: SEGGER J-Link 20-pin connector pinout.

Scale Test Farms Reliably

PoE and Ethernet let many probes run unattended in parallel, one network cable per node.

Accelerate Debug Cycles

High download rates and Unlimited Flash Breakpoints shorten build-flash-debug loops.

Reduce Lab Complexity

One-cable PoE and VCOM minimise extra adapters, bricks, and cabling in shared lab racks.

The SEGGER J-Link PRO PoE (part number 8.12.28) is an Ethernet and USB JTAG/SWD debug probe powered over the network cable by IEEE 802.3af PoE (type 1, class 3), with up to 50 MHz target interface speed and download speeds up to 4 MB/s. When PoE powered it can supply the target with 5.25V at up to 1000mA, and it includes licences for J-Flash, Unlimited Flash Breakpoints, Ozone and RDI. SEGGER built it for test farms: automated, regression and continuous integration testing where each probe sits on the LAN rather than beside a PC.

Power over Ethernet for Test Farm Nodes

One Ethernet cable carries data and power, so each node in a rack needs no USB power supply. SEGGER's Test Farm reference design gives every node a J-Link PRO PoE, connected to the LAN through its Ethernet interface and can be powered from PoE switches where the LAN provides PoE. The device under test is connected to the probe by a USB cable so its power supply can be controlled, alongside a target adapter chosen to match its debug connector. On the probe itself, the USB-A port is listed as power only.

Ethernet and USB Host Interfaces

The probe connects by 100 Mbit/s Ethernet or USB 2.0 Hi-Speed. In delivery condition it is configured for DHCP, and a static address can be set with J-Link Configurator. A built-in web server on TCP port 80 gives configuration access from a browser. The Ethernet data lines are isolated to IEEE 802.3 at a 1500 Vrms test voltage for one minute.

50 MHz JTAG/SWD, Power Measurement and Licences

SEGGER lists the same speed and feature figures for the PRO PoE as for the J-Link PRO: up to 50 MHz target interface speed, SWO sampling up to 100 MHz, 1.2V to 5V target interface voltage and analogue power measurement at 200 kHz with 50µA resolution. The target uses the standard J-Link 20-pin 0.1" connector; see our SEGGER J-Link 20-pin connector pinout guide. The J-Link PRO feature list covers JTAG, cJTAG, SWD, SWD multi-drop, SWO, SPI, Microchip ICSP, Renesas FINE and Silicon Labs C2, with cores from ARM Cortex-M0 to Cortex-M85, Cortex-A and Cortex-R, RISC-V (SiFive, Andes, Codasip, Nuclei), Renesas RX, Microchip PIC32 and Silicon Labs EFM8. J-Flash is preinstalled, and RTT and VCOM are supported.

What Is in the Box

J-Link PRO PoE probe, 20-pin 0.1" ribbon cable and a USB cable. Mounting brackets are sold separately.

Specifications

Host interfaces 100 Mbit/s Ethernet; USB 2.0 Hi-Speed
Power over Ethernet IEEE 802.3af PoE type 1, class 3
Target connector JTAG/SWD 20-pin, 0.1" (2.54mm); USB-A (power only)
Supported debug interfaces JTAG, cJTAG, SWD, SWO, Microchip ICSP, Renesas FINE
Target interface voltage (VIF) 1.2V to 5V
Current drawn from VTref Less than 25µA
Target supply, PoE powered 5.25V, max. 1000mA
Target supply, USB powered 5V, max. 400mA
Target interface speed Max. 50 MHz
SWO sampling frequency Max. 100 MHz
Download speed Up to 4 MB/s
Power measurement 200 kHz sampling frequency, 50µA resolution
Ethernet isolation Data lines to IEEE 802.3, 1500 Vrms for one minute
Included licences J-Flash (preinstalled), Unlimited Flash Breakpoints, Ozone, RDI
Dimensions (without cables) 123mm x 68mm x 30mm
Weight (without cables) 125g
Operating temperature +5°C to +60°C
Storage temperature -20°C to +65°C
Relative humidity Max. 90% rH, non-condensing
EMC EN 55032, EN 55035
Host OS Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)

Limitations

  • PoE operation needs an IEEE 802.3af power source on the network side, such as a PoE switch; without one, power the probe from USB.
  • The 1000mA target supply applies only when PoE powered; from USB the limit is 400mA.
  • The Ethernet shield is not isolated; SEGGER specifies an unshielded twisted pair cable for effective isolation.
  • No ETM trace on Cortex-M (use SEGGER J-Trace) and no QSPI target interface.

J-Link PRO PoE Compared with PLUS, ULTRA+ and PRO

Model Host interface Download speed Target interface speed Ethernet Power over Ethernet Supported cores Price ex VAT
J-Link PLUS Classic USB 2.0 Hi-Speed Up to 1 MB/s Up to 15 MHz No No ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £660
J-Link ULTRA+ (J-Link Ultra) USB 2.0 Hi-Speed Up to 4 MB/s Up to 50 MHz No No ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £870
J-Link PRO USB 2.0 Hi-Speed and 100 Mbit/s Ethernet Up to 4 MB/s Up to 50 MHz Yes No ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £1,100
J-Link PRO PoE (this product) USB 2.0 Hi-Speed and 100 Mbit/s Ethernet Up to 4 MB/s Up to 50 MHz Yes Yes, IEEE 802.3af ARM Cortex-M/A/R, RISC-V, Renesas RX, PIC32, EFM8 £1,320

Typical Applications

A rack of PRO PoE probes on a PoE switch, each flashing and testing one STM32 or nRF board per CI build, with the device under test power-cycled between runs. Regression testing of Cortex-M33 firmware on a remote bench reached over the LAN. Overnight soak tests where the probe reports RTT logs from a target that nobody is sitting next to.

For a single desk with USB, the ULTRA+ gives the same 50 MHz and 4 MB/s figures; the J-Link PRO adds Ethernet without PoE.

Order the J-Link PRO PoE for £1,320 ex VAT. Ask us for a formal quotation for a test farm quantity, or check your part number against SEGGER's supported devices list. See the full range in our SEGGER debug probes collection.

Last reviewed: 30 October 2026

Sources (7 manufacturer pages)
Host and Target Interface
Host interfaces100 Mbit/s Ethernet; USB 2.0 Hi-Speed
Target connectorJTAG/SWD 20-pin, 0.1" (2.54mm); USB-A (power only)
Target interface voltage (VIF)1.2V to 5V
Ethernet isolationData lines to IEEE 802.3, 1500 Vrms for one minute
Performance
Target interface speedMax. 50 MHz
SWO sampling frequencyMax. 100 MHz
Download speedUp to 4 MB/s
Power
Power over EthernetIEEE 802.3af PoE type 1, class 3
Current drawn from VTrefLess than 25µA
Target supply, PoE powered5.25V, max. 1000mA
Target supply, USB powered5V, max. 400mA
Power measurement200 kHz sampling frequency, 50µA resolution
Software and Compatibility
Supported debug interfacesJTAG, cJTAG, SWD, SWO, Microchip ICSP, Renesas FINE
Included licencesJ-Flash (preinstalled), Unlimited Flash Breakpoints, Ozone, RDI
Host OSWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)
Physical
Dimensions (without cables)123mm x 68mm x 30mm
Weight (without cables)125g
Environmental
Operating temperature+5°C to +60°C
Storage temperature-20°C to +65°C
Relative humidityMax. 90% rH, non-condensing
EMCEN 55032, EN 55035
Información de pedido
Referencia (SKU)8.12.28
FabricanteSEGGER Microcontroller GmbH
EAN5055383619863
Garantía12 months
Peso de envío0.5 kg
  • 1 ×J-Link PRO PoE debug probe
  • 1 ×Cable USB
  • 1 ×Cable plano de 20 pines, paso de 2.54 mm (0.1 in), 18 cm

SEGGER J-Link Pro PoE Debug Probe comparado con SEGGER J-Link BASE Classic sonda de depuración USB JTAG/SWD , SEGGER J-Link BASE Compact Debug Probe , SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe , SEGGER J-Link PLUS Compact (8.19.28) , SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe , SEGGER J-Link PRO: sonda de depuración Ethernet/USB ultrarrápida and SEGGER J-Link WiFi Wireless Debug Probe (8.14.28) en 16 especificaciones.

Especificaciones de SEGGER J-Link Pro PoE Debug Probe comparado con SEGGER J-Link BASE Classic sonda de depuración USB JTAG/SWD , SEGGER J-Link BASE Compact Debug Probe , SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe , SEGGER J-Link PLUS Compact (8.19.28) , SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe , SEGGER J-Link PRO: sonda de depuración Ethernet/USB ultrarrápida and SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)
Especificación Este producto SEGGER J-Link Pro PoE Debug Probe8.12.28Disponible bajo pedido SEGGER J-Link BASE Classic sonda de depuración USB JTAG/SWD8.08.00En stock SEGGER J-Link BASE Compact Debug Probe8.19.00En stock SEGGER J-Link PLUS Classic – USB JTAG/SWD Debug Probe8.08.28Disponible bajo pedido SEGGER J-Link PLUS Compact (8.19.28)8.19.28Disponible bajo pedido SEGGER J-Link ULTRA+ Ultra-Fast JTAG/SWD Debug Probe8.16.28Disponible bajo pedido SEGGER J-Link PRO: sonda de depuración Ethernet/USB ultrarrápida8.12.00Disponible bajo pedido SEGGER J-Link WiFi Wireless Debug Probe (8.14.28)8.14.28Disponible bajo pedido
USB host interface USB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB tipo BUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB Type BUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB-CUSB 2.0 Hi-Speed, USB Type B
Network interface 100 Mbit/s EthernetNinguna (solo USB)None (USB only)None (USB only)Ninguna (solo USB)None (USB only)Ethernet de 100 Mbit/sWiFi IEEE 802.11 b/g/n, 2.4 GHz
Power over Ethernet IEEE 802.3af, Type 1, Class 3No compatibleNot supportedNot supportedNo compatibleNot supportedNo compatibleNot supported
Ethernet isolation Data lines isolated to IEEE 802.3, 1500 Vrms for 1 minute (shield not isolated)Sin interfaz EthernetNo Ethernet interfaceNo Ethernet interfaceSin interfaz EthernetNo Ethernet interfaceLíneas de datos aisladas según IEEE 802.3, 1500 Vrms durante 1 minuto (blindaje no aislado)No Ethernet interface
Size and weight 123 x 68 x 30 mm, 125 g100 x 53 x 27 mm, 70 g46 x 46 x 17 mm, 20 g100 x 53 x 27 mm, 70 g46 x 46 x 17 mm, 20 g72 x 45 x 18 mm, 40 g100 x 53 x 27 mm, 73 g103 x 53 x 28 mm, 70 g
Target interface speed Max. 50 MHzMáx. 15 MHzMax. 15 MHzMax. 15 MHzMáx. 15 MHzMax. 50 MHzMáx. 50 MHzMax. 15 MHz
Download speed Up to 4 MB/sHasta 1 MB/sUp to 1 MB/sUp to 1 MB/sHasta 1 MB/sUp to 4 MB/sHasta 4 MB/sUp to 1 MB/s
SWO sampling frequency Max. 100 MHzMáx. 30 MHzMax. 30 MHzMax. 30 MHzMáx. 30 MHzMax. 100 MHzMáx. 100 MHzMax. 30 MHz
Max. VCOM baud rate 10 MBd115200 Bd115200 Bd115200 Bd115200 Bd10 MBd10 MBd115200 Bd
Target interface voltage (VIF) 1.2 V to 5 V1.2 V a 5 V1.2 V to 5 V1.2 V to 5 V1.2 V a 5 V1.2 V to 5 V1.2 V a 5 V1.2 V to 5 V
Target supply 5 V, max. 400 mA via USB; 5.25 V, max. 1000 mA via PoE5 V desde USB, máx. 300 mA5 V from USB, max. 300 mA5 V from USB, max. 300 mA5 V desde USB, máx. 300 mA5 V from USB, max. 300 mA5 V desde USB, máx. 300 mA5 V from USB, max. 300 mA
Power measurement 200 kHz sampling, 50 µA resolutionNo compatibleNot supportedNot supportedNo compatible200 kHz sampling, 50 µA resolutionMuestreo de 200 kHz, resolución de 50 µANot supported
J-Flash / J-Flash SPI licence IncludedNo incluido (ampliación BASE to PLUS)Not included (BASE to PLUS upgrade)IncludedIncluidaIncludedIncluidaIncluded
Unlimited Flash Breakpoints IncludedNo incluido (ampliación BASE to PLUS)Not included (BASE to PLUS upgrade)IncludedIncluidaIncludedIncluidoIncluded
Ozone licence IncludedNo incluido (ampliación BASE to PLUS)Not included (BASE to PLUS upgrade)IncludedIncluidaIncludedIncluidaIncluded
RDI licence IncludedNo incluido (ampliación BASE to PLUS)Not included (BASE to PLUS upgrade)IncludedIncluidaIncludedIncluidaIncluded
Precio£1,320 £470 £470 £660 £660 £870 £1,100 £1,100
Preguntas a nuestros ingenieros

Preguntas y respuestas

12 questions
  • Do I Need Special Software Licences?

    No. Unlimited Flash Breakpoints, J-Flash, Ozone and J-Link GDB Server are included in the J-Link Software & Documentation Pack.

    Answered by John LeggUpdated 12 Oct 2026
  • Is ETM Instruction Trace Supported?

    For continuous ETM streaming trace, choose the J-Trace. J-Link can read ETB where available, but is not a substitute for the J-Trace.

    Answered by John LeggUpdated 12 Oct 2026
  • Does It Work with My IDE?

    J-Link integrates with major IDEs and debuggers on Windows, Linux, and macOS via the J-Link DLL or GDB Server.

    Answered by John LeggUpdated 12 Oct 2026
  • Can I Access It Remotely Over the Network?

    Yes. Use Ethernet and SEGGER’s Remote Server for LAN/WAN access. PoE simplifies remote placement in racks and enclosures.

    Answered by John LeggUpdated 12 Oct 2026
  • Can It Power the Target Device?

    Yes. When PoE-powered, the probe can supply target power via the debug header or USB-A, enabling scripted power-cycles during automated tests.

    Answered by John LeggUpdated 12 Oct 2026
  • How Fast Is Programming?

    Up to 4 MB/s into RAM (target-dependent). This reduces turnaround between builds during CI and interactive debugging.

    Answered by John LeggUpdated 12 Oct 2026
  • Does It Support SWD, JTAG, and SWO?

    Yes. It supports standard ARM JTAG/SWD; SWO is available on supported MCUs for printf-style logging and event tracing.

    Answered by John LeggUpdated 12 Oct 2026

¿No encuentra la respuesta? Pregunte a nuestros ingenieros.

Hacer una pregunta

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.