Ir directamente a la información del producto
1 de 1

SEGGER Microcontroller GmbH

SEGGER 5V Target Supply Adapter

SEGGER 5V Target Supply Adapter

Fixed 5 V inline target supply via the 20‑pin J‑Link cable (pin 19); voltage changes require resistor modification.

SKU: 8.06.29

Precio habitual
£130.00 exc VAT
£156.00 inc VAT
Precio habitual Precio de oferta
£130.00 exc VAT
£156.00 inc VAT
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Formas de pago

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Ver todos los detalles

Descripción general

The 5V Target Supply Adapter powers the target board with 5V ±5% on pin 19 of the debug cable. SEGGER quotes 500mA output current at 5V, and 220mA at 5V as the maximum output current, which it marks as drive-dependent. It plugs directly between a J-Link or Flasher and the debug cable and keeps a 1:1 connection of all debug signals.

The SEGGER 5V Target Supply Adapter (part number 8.06.29) powers the target board with 5V ±5% on pin 19 of the debug cable, rated by SEGGER at 5V and 500mA output current, with a 220µF maximum capacitive load and a 2 to 6 ms output ramp. It plugs directly between a J-Link or Flasher and the debug cable and keeps a 1:1 connection of all debug signals. It suits bench debug and production programming of 5V boards that should take their supply from the probe side rather than a separate bench supply.

Fixed 5V Target Power Inline With the Debug Cable

The adapter sits on the standard J-Link 20-pin 0.1" connector found on most J-Link models, between the probe and its ribbon cable. Every debug signal passes straight through; only the supply on pin 19 is added, so JTAG or SWD wiring to the target does not change. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.

Output Current and Probe Drive

SEGGER quotes two current figures: 500mA output current at 5V, and 220mA at 5V as the maximum output current, which SEGGER marks as drive-dependent. Plan target load against the lower figure unless you have measured otherwise. The output ramps up within 2 to 6 ms and tolerates up to 220µF of capacitance on the target rail.

SEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.

Specifications

Output voltage 5V ±5%
Output current 5V / 500mA
Max. output current (drive-dependent) 5V / 220mA
Max. capacitive load 220µF
Ramp time (output) 2 to 6 ms
Supply pin Pin 19 of the debug cable
Debug signals 1:1 connection of all signals
Part number 8.06.29

What's Included

SEGGER publishes no box list for this adapter; the order is for the 5V Target Supply Adapter itself.

Limitations

  • One output voltage. SEGGER's product page states the supply is fixed at 5V; SEGGER's shop listing adds that it can be changed by replacing resistors. For other voltages, the Target Supply Adapter covers 0.8V to 3.6V (3.3V default, set by changing one resistor).
  • Usable current depends on the driving probe; SEGGER's drive-dependent maximum is 220mA at 5V.
  • It supplies the target only. To set the probe's I/O voltage on a board with no VTref, use the Supply Adapter.

5V Target Supply Adapter Compared with Related Adapters

Adapter What it supplies Range and current Price ex VAT
5V Target Supply Adapter (this product) Target supply on pin 19 Fixed 5V ±5%, 500mA (220mA drive-dependent) £130
Target Supply Adapter Adjustable target supply 0.8V to 3.6V, max. 400mA at 3.3V and 3.6V £84
Supply Adapter I/O voltage in place of target VTref 1.2V to 5.0V, manually adjustable £81
Programming Voltage Adapter Two independent voltages, programming voltage on pin 17 4V to 20V, up to 500mA £130

Order the 5V Target Supply Adapter for £130 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (7 manufacturer pages)
General
Output voltage5V ±5%
Output current5V / 500mA
Max. output current (drive-dependent)5V / 220mA
Max. capacitive load220µF
Ramp time (output)2 to 6 ms
Part number8.06.29
Host and Target Interface
Debug signals1:1 connection of all signals
Power
Supply pinPin 19 of the debug cable
Información de pedido
Referencia (SKU)8.06.29
FabricanteSEGGER Microcontroller GmbH
EAN5055383614271
Garantía12 months
Peso de envío0.02 kg
  • 1 × SEGGER 5V Target Supply Adapter

Contacte con nosotros para confirmar el contenido completo de la caja.

Preguntas a nuestros ingenieros

Preguntas y respuestas

3 questions
  • Can I Change the Output Voltage?

    Not without rework. SEGGER's product page gives a fixed 5V output, and SEGGER's shop listing says the voltage can be adjusted by replacing resistors. If you need 3.3V, the Target Supply Adapter delivers it as default and can be set from 0.8V to 3.6V by changing one resistor.

    Answered by John LeggUpdated 16 Nov 2026
  • How Much Current Can My Target Draw?

    SEGGER lists 500mA output current at 5V, and a drive-dependent maximum of 220mA at 5V. Size the target load to 220mA unless you have confirmed more with your probe.

    Answered by John LeggUpdated 16 Nov 2026
  • Does It Change Any Debug Signals?

    No. SEGGER specifies a 1:1 connection of all debug signals; the adapter only adds the 5V supply on pin 19.

    Answered by John LeggUpdated 16 Nov 2026

¿No encuentra la respuesta? Pregunte a nuestros ingenieros.

Hacer una pregunta

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.