Ir directamente a la información del producto
1 de 1

SEGGER Microcontroller GmbH

SEGGER Flasher Portable PLUS Programmer

SEGGER Flasher Portable PLUS Programmer

Battery-powered handheld service programmer

SKU: 5.16.02

Precio habitual
£1,100.00 exc VAT
£1,320.00 inc VAT
Precio habitual Precio de oferta
£1,100.00 exc VAT
£1,320.00 inc VAT
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Formas de pago

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Ver todos los detalles

Características principales

128 MB internal flash stores up to 99 firmware images
Programming speed from 30 KB/s to 1 MB/s, depending on the target
Up to 10 hours of continuous use on the rechargeable lithium-ion battery
JTAG, SWD, FINE and SPD target interfaces for on-chip and external flash
Supports ARM, Cortex, PowerPC and Renesas RX cores

Overview

The Flasher Portable PLUS is a battery-powered handheld flash programmer with a 1.8" colour screen and 128 MB of internal flash for up to 99 firmware images. It has a 1.2V to 5V target interface, speeds up to 50 MHz and a rechargeable battery that runs for up to 10 hours. It suits service technicians reflashing installed equipment without a PC or mains power.

Descargas

User Manuals

  • SEGGER Flasher PDF2.6 MB · 9.88 · Oct 2026
    Details

The SEGGER Flasher Portable PLUS (part number 5.16.02) is a battery-powered handheld flash programmer with a 1.8" colour screen, 128 MB of internal flash for up to 99 firmware images, a 1.2V to 5V target interface and target interface speeds up to 50 MHz. Its rechargeable lithium-ion battery runs for up to 10 hours, so firmware can be updated in the field without a PC or mains power. It suits service technicians reflashing installed equipment and engineers who need a stand-alone programmer away from the production line.

Battery-Powered Field Service Programmer

SEGGER built the Portable PLUS for equipment that cannot easily be connected to a network, such as wind turbines, remote installations and industrial machinery in hard-to-reach places. When a firmware issue is found, a technician can apply the patch on site with no PC and no access to a power supply. The battery charges automatically whenever the unit is connected over USB to a host computer or a standard USB power adapter, including a phone charger or power bank; a full charge takes about 70 minutes at 1 A. The unit can also run from USB power.

Colour Screen and Stored Firmware Images

The 1.8" 128 x 160 pixel RGB TFT screen gives direct feedback and access to project data. The 128 MB internal flash stores as many as 99 firmware images, so one programmer can cover several products or firmware versions on a service round. Turbo mode downloads and programs at the same time, and SEGGER quotes programming speeds from 30 KB/s to 1 MB/s depending on the target hardware.

Supported Devices and Authorized Flashing

SEGGER lists tens of thousands of supported devices in hundreds of device families, the same library as the other Flasher models, with supported cores including ARM, Cortex, PowerPC and Renesas RX. If the programmer is lost in the field, Authorized Flashing protects your firmware: once the set number of programming cycles is reached, the Flasher stops working for that project. The target connector is a male 20-pin IDC keyed box header with 0.1" (2.54mm) pitch; pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide. Setup and control software runs on Windows (x86-64 and ARM64), Linux (x86-64 and ARM64) and macOS (x86-64 and Apple Silicon).

Specifications

Power supply Internal rechargeable lithium-ion battery, or USB
Battery run time Up to 10 hours of continuous use
Charging via USB 70 minutes at 1 A charging current
Screen 1.8" 128 x 160 px RGB TFT, LED backlight
Host interface USB 2.0 High-Speed, USB Type B
Target interface Male 20-pin IDC keyed box header, 0.1" (2.54mm) pitch, optional adapters
Internal flash memory 128 MB (TBW: 10 TB), up to 99 firmware images
Target interface speed Up to 50 MHz
Programming speed 30 KB/s to 1 MB/s, depending on target hardware
Supported target voltage 1.2V to 5V
Current drawn from VTRef Less than 25µA
Target supply 5V, max. 400mA
Reset type Open drain with 100 Ohm series resistor, can be pulled low or tristated
Target cable length 20cm recommended and supplied; max. 2m, which may reduce target interface speed
Size (without cables) 126mm x 70mm x 28mm
Weight (without cables) 140g
Operating temperature +5°C to +60°C (normal operation); +5°C to +45°C (battery charging)
Storage temperature -20°C to +45°C
Relative humidity Less than 90% rH, non-condensing
Host OS Windows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)

What's Included

  • Flasher Portable PLUS
  • USB cable
  • 20-pin 0.1" target ribbon cable

Limitations

  • No Ethernet or RS232 control. For a production station use the Flasher PRO, or the Flasher Compact inside a fixture.
  • Battery charging is limited to +5°C to +45°C, and storage to a maximum of +45°C, narrower than the +5°C to +60°C operating range.
  • Actual programming speed depends on the target: SEGGER quotes 30 KB/s to 1 MB/s.
  • The Renesas FINE interface works only in host-based mode, with a PC connected. Stand-alone support for Cortex devices is limited to CoreSight SoC-400 debug port setups.
  • Customised versions are by arrangement with SEGGER; contact us with your requirements.

Flasher Portable PLUS Compared with Other SEGGER Flasher Models

Model Internal memory Host and control interfaces Power Price ex VAT
Flasher Portable PLUS (this product) 128 MB USB, 1.8" colour display Li-ion battery or USB £1,100
Flasher PRO 128 MB USB, RS232, Ethernet USB £1,100
Flasher PRO XL 2 GB USB, RS232, Ethernet USB £1,320
Flasher Compact 128 MB USB-C USB £920

Typical Applications

Field update of a Cortex-M controller inside a wind turbine nacelle, with no laptop and no mains supply. A service engineer carrying firmware for several product generations on one programmer. Reflashing Renesas RX-based machinery after a firmware fault, with Authorized Flashing capping how many units the image can be applied to.

Choose the Portable PLUS for service and field work; for line-side programming, the Flasher PRO or Flasher Compact is the better fit.

Order the Flasher Portable PLUS for £1,100 ex VAT. Check your part number against SEGGER's supported devices list, or ask us for a formal quotation. See the full range in our SEGGER debug and programming tools collection.

Last reviewed 20/11/2026.

Sources (3 manufacturer pages)
General
Battery run timeUp to 10 hours of continuous use
Screen1.8" 128 x 160 px RGB TFT, LED backlight
Internal flash memory128 MB (TBW: 10 TB), up to 99 firmware images
Reset typeOpen drain with 100 Ohm series resistor, can be pulled low or tristated
Host and Target Interface
Charging via USB70 minutes at 1 A charging current
Host interfaceUSB 2.0 High-Speed, USB Type B
Target interfaceMale 20-pin IDC keyed box header, 0.1" (2.54mm) pitch, optional adapters
Target cable length20cm recommended and supplied; max. 2m, which may reduce target interface speed
Performance
Target interface speedUp to 50 MHz
Programming speed30 KB/s to 1 MB/s, depending on target hardware
Power
Power supplyInternal rechargeable lithium-ion battery, or USB
Current drawn from VTRefLess than 25µA
Target supply5V, max. 400mA
Software and Compatibility
Supported target voltage1.2V to 5V
Host OSWindows and Linux (x86-64, ARM64); macOS (x86-64, Apple Silicon)
Physical
Size (without cables)126mm x 70mm x 28mm
Weight (without cables)140g
Environmental
Operating temperature+5°C to +60°C (normal operation); +5°C to +45°C (battery charging)
Storage temperature-20°C to +45°C
Relative humidityLess than 90% rH, non-condensing
Ordering information
Part number (SKU)5.16.02
ManufacturerSEGGER Microcontroller GmbH
EAN5055383605729
Warranty12 months
Shipping weight0.5 kg
  • 1 ×Flasher Portable PLUS programmer
  • 1 ×USB cable
  • 1 ×20-pin, 0.1" target ribbon cable
Preguntas a nuestros ingenieros

Preguntas y respuestas

3 questions
  • How Do I Charge the Flasher Portable PLUS?

    Connect it over USB. It charges automatically from a host computer or a standard USB power adapter, such as a phone charger or power bank, and a full charge takes about 70 minutes at 1 A.

    Answered by John LeggUpdated 16 Nov 2026
  • Does It Support the Same Devices as the Flasher PRO?

    Yes. SEGGER states that the Portable PLUS supports the same library of tens of thousands of devices and hundreds of CPU families as the other Flasher models.

    Answered by John LeggUpdated 16 Nov 2026
  • What Happens If the Programmer Is Lost in the Field?

    With Authorized Flashing set up, your firmware stays protected. You set a limit on programming cycles; once it is reached, the Flasher stops working for that project, so the image cannot be copied onto further units.

    Answered by John LeggUpdated 16 Nov 2026

¿No encuentra la respuesta? Pregunte a nuestros ingenieros.

Hacer una pregunta

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.