Mikroelektronika d.o.o.
Clicker Board 2 for PIC24
Clicker Board 2 for PIC24
Couldn't load pickup availability
Overview
The Clicker 2 Board™ for PIC24 is a compact development kit with two MikroBUS sockets for Click Board™ connectivity. It carries the PIC24FJ1024GB610, a 16-bit microcontroller, that features large dual partition flash with live update capability.
With a built-in USB-HID bootloader, the Clicker 2 Board™ for PIC24 is easy to program.
The Clicker 2 for PIC24 is based on the Microchip PIC24FJ1024GB610 is a 16-bit Microcontroller featuring large dual partition flash with live update capability. This family includes up to 1024KB Flash, 32KB RAM, USB and advanced peripherals. The combination of features makes the part ideally suited for always on applications and applications requiring high memory.
Powering Your Inventions
Focus on your main idea because the will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for PIC24 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).
Processor
- PIC24 has 32 KB SRAM
- Speed: 16 MIPS
Connectivity
- 52 programmable GPIOs
- 2 mikroBUS host sockets
- Mini USB connector
Expanding Your Ideas
No idea is too big for the Clicker 2 for PIC24. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.
mikroBUS Shield for mikromedia mikromedia connect shield mikromedia PROTO shield Battery Boost Shield 
Hardware Debugging
Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use the mikroProg™ for PIC24. It's a fast hardware debugger and programmer that exploits the MCU's integrated encryption module, enabling secure firmware updating.
USB HID BOOTLOADER Inside
To make your prototyping experience as convenient as possible, the Clicker 2 for PIC24 is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.
SPECIFICATION TABLE
| Type | Clicker 2 |
| Architecture | dsPIC/PIC24 (16-bit) |
| Programming | Bootloader, External |
| Silicon Vendor | Microchip |
| mikroBUS No. | 2 |
| Supply Voltage | Battery, USB |
| Category | Clicker 2 |
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.