Mikroelektronika d.o.o.
Clicker Board 2 for MSP432
Clicker Board 2 for MSP432
Couldn't load pickup availability
Overview
The Clicker 2 for MSP432 is a battery-powered Click board two-seater. Inventing and putting together fully functional standalone gadgets is now just 1% perspiration and 99% inspiration!
The Clicker 2 for MSP432 carries the SimpleLink™ MSP432™ - ARM® 32-Bit Cortex®-M4F CPU with integrated 1Msps 14-bit SAR-based ADC from Texas Instruments.
Thousands of possibilities with Click Boards™
With two mikroBUS™ sockets on the Clicker 2 for MSP432, you can take advantage of the huge potential of Click boards™, the constantly expanding range of over 899 add-on Click boards™. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is half-way done. Go ahead and play with a few ideas right away.
Programming
To make your prototyping experience as convenient as possible, the Clicker 2 for MSP432 is preprogrammed with a UART bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for MSP432 connector enables programming through external programmer/debugger.
Power Management
The Clicker 2 for MSP432 features LTC®3586, a highly integrated power management and battery charger IC that includes a current limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.
MSP432™ MICROCONTROLLER
The SimpleLink™ MSP432™ microcontroller is ultra-low-power microcontrollers with high performance processing capabilities and high-precision analog integration optimized for as host MCU for wireless connectivity, sensing and measurement.
The SimpleLink™ MSP432™ MCUs feature the ARM Cortex-M4 processor in a wide configuration of device options including a rich set of high-precision analog, timing, and communication peripherals, thereby catering to a large number of application scenarios where both efficient data processing and enhanced low-power operation are paramount.
The MCU has 256KB of Flash Main Memory (Organized Into Two Banks Enabling Simultaneous Read/Execute During Erase). 16KB of Flash Information Memory (Used for BSL, TLV, and Flash Mailbox). Up to 64KB of SRAM (Including 6KB of Backup Memory). 32KB of ROM With MSP432™ Peripheral Driver Libraries.
POWERING YOUR INVENTIONS
Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-1 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for MSP432 features a reset button and an ON/OFF switch (you can also connect an external ON/OFF switch).
Processor
- MSP432 has 64 KB SRAM
- 32 KB boot ROM
- 48MHz
Connectivity
- 52 programmable GPIOs
- 2 mikroBUS host sockets
- Micro USB connector
Expanding Your Ideas
No idea is too big for Clicker 2 for MSP432. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.