Micsig
Micsig GEN5 Tablet Oscilloscope ETO3000 Series - 350MHz/500MHz 4-Channel
Micsig GEN5 Tablet Oscilloscope ETO3000 Series - 350MHz/500MHz 4-Channel
SKU: ETO3504
Couldn't load pickup availability
Key Features
Overview
The Micsig GEN5 Tablet Oscilloscope ETO3000 series represents the latest evolution in portable test instrumentation, combining desktop oscilloscope capabilities with tablet convenience. These 4-channel instruments deliver professional measurements with 350MHz or 500MHz bandwidth, 3GSa/s sampling rates, and exceptional 360Mpts memory depth. The 14-inch high-resolution touchscreen and dedicated SigtestUI™ operating system provide intuitive operation whether in laboratory or field environments.
Built for engineers who demand portability without sacrificing performance, the ETO series features a ruggedised design with integrated battery providing over 5 hours continuous operation. The Mic-OPI™ probe interface automatically recognises connected probes and enables one-click calibration, eliminating setup time and measurement errors.
Available in two bandwidth variants, the ETO3504 (350MHz) and ETO5004 (500MHz) share identical features including ultra-low noise performance, comprehensive triggering options, and extensive connectivity. For related portable test solutions, consider our logic analysers and protocol analysers for comprehensive signal debugging capabilities.
Downloads
Why Engineers Choose The Micsig GEN5 Tablet Oscilloscope ETO3000 Series - 350MHz/500MHz 4-Channel
Exceptional Portability
Ultra-Low Noise Floor
Intuitive Operation
Professional 4-Channel Tablet Oscilloscope for Field and Laboratory Use
The Micsig GEN5 Tablet Oscilloscope ETO3000 series delivers professional-grade signal analysis in a portable 14-inch tablet format. Available in 350MHz (ETO3504) and 500MHz (ETO5004) variants, these instruments combine desktop oscilloscope performance with field-portable convenience.
Ultra-Low Noise Floor Performance
Achieve precise measurements with noise floor less than 90μVrms even at full 500MHz bandwidth. This exceptional noise performance enables accurate capture of weak signals during circuit debugging and troubleshooting applications.
Deep Memory and High Capture Rate
| Parameter | ETO3504 | ETO5004 |
|---|---|---|
| Bandwidth | 350MHz | 500MHz |
| Sampling Rate | 3GSa/s | 3GSa/s |
| Memory Depth | 360Mpts | 360Mpts |
| Waveform Capture Rate | 230,000wfms/s | 230,000wfms/s |
SigtestUI™ Multitasking Operating System
The dedicated SigtestUI™ operating system provides intuitive touchscreen operation optimised for oscilloscope functions. Navigate complex measurements and analysis tools with tablet-like simplicity whilst maintaining professional measurement accuracy.
Field-Ready Design Features
- Built-in 13,500mAh Li-ion battery for 5+ hours continuous operation
- VESA 75mm×75mm mounting compatibility for flexible installation
- Anti-glare 14-inch display (1920×1200 resolution)
- Soft rubber protection for harsh environments
- Power-off lock for secure transport
Comprehensive Connectivity
Multiple interfaces support diverse measurement scenarios:
- USB 3.0/2.0 Host and Device connections
- USB Type-C for modern device compatibility
- HDMI output for external displays or presentations
- Trigger output for synchronisation
- 32GB internal storage for waveform data
Advanced Triggering and Analysis
Professional trigger modes include edge, pulse width, logic, Nth edge, runt, slope, and timeout triggers. Built-in serial bus decoding supports RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, and MIL-STD-1553B protocols.
Digital Filtering and Mathematical Functions
Hardware digital filtering operates down to 30Hz, effectively removing interference whilst preserving signal integrity. Advanced mathematical functions include FFT analysis, custom formula support, and segmented storage for up to 10,000 events.
Frequently Asked Questions
Have a Question?
-
What probe types are compatible with the ETO series?
The Mic-OPI™ interface supports Micsig active probes whilst standard BNC adapters accommodate conventional passive probes. The interface automatically configures attenuation ratios and compensation settings for recognised probe types.
-
Can multiple ETO oscilloscopes be synchronised for multi-channel analysis?
The trigger output port enables synchronisation with external instruments. For applications requiring more than 4 channels, consider our selection of modular oscilloscope systems.
-
What mathematical analysis functions are available?
The ETO series supports advanced mathematics including FFT analysis, custom formula creation, and comprehensive waveform calculations. Segmented storage enables capture and analysis of up to 10,000 events.
-
Is the touchscreen suitable for outdoor field work?
The 14-inch display features anti-glare coating and 1920×1200 resolution optimised for outdoor visibility. The ruggedised design with soft rubber protection ensures reliable operation in harsh field environments.
-
How does the noise performance compare to benchtop oscilloscopes?
The ETO series achieves noise floor less than 90μVrms even at full 500MHz bandwidth, matching or exceeding many benchtop instruments. This performance enables accurate measurement of weak signals in sensitive circuit analysis.
-
What connectivity options are available for data transfer?
The ETO series provides USB 3.0/2.0 Host and Device ports, USB Type-C, HDMI output, and 32GB internal storage. These options support file transfer, external display connection, and remote operation capabilities.
-
Can the ETO series decode serial communication protocols?
Yes, the ETO series includes built-in decoding for RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, and MIL-STD-1553B protocols. This enables comprehensive analysis of embedded system communications.
-
What is the battery life for field operation?
The built-in 13,500mAh Li-ion battery provides over 5 hours continuous operation. The power-off lock feature secures the instrument during transport whilst preserving battery charge.
-
How does the Mic-OPI™ probe interface improve measurement accuracy?
The Mic-OPI™ interface automatically identifies probe model and serial number, enabling one-click calibration. This eliminates manual probe compensation adjustments and reduces measurement errors caused by incorrect probe settings.
-
What is the difference between the ETO3504 and ETO5004 models?
The ETO3504 offers 350MHz bandwidth whilst the ETO5004 provides 500MHz bandwidth. Both models share identical features including 4 channels, 3GSa/s sampling rate, 360Mpts memory depth, and 14-inch touchscreen operation.