Skip to product information
1 of 4

Mikroelektronika d.o.o.

VREG Click Board™

VREG Click Board™

SKU: MIKROE-2443

Regular price
€36,95 EUR exc tax
Regular price Sale price
€36,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock shown above, check availability

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

The VReg Click Board™ is a digitally controlled DC Voltage regulator in MikroBUS form factor. The design is based on the well-known LM317 circuit, with the addition of a 12-bit DAC, 12-bit ADC, and an Operational Amplifier.

Two pairs of screw terminals serve as inputs and outputs.

Line and Load Regulation

The LM317 IC is a reliable regulator with typical line regulation of 0.01% and load regulation of 0.1%. It also has internal short-circuit current limiting and thermal overload protection.

Heat Dissipation

The circuit regulates voltage by turning all input/output difference into heat (effectively dissipating all the excess power). If it gets too hot it may damage the board or cause unexpected behaviour.Because of that, the boards operating range is defined by two factors.

  1. Maximum input voltage and current (should not exceed 20V/1A).
  2. Maximum wattage arising from current and I/O voltage difference (should not exceed 2W, measured as I x (Input V - Output V).

SPI Interface

The board also carries a MOSFET chip to toggle the output on and off. The VReg Click Board™ communicates with the target board MCU through the SPI interface (CS, SCK, MISO, MOSI). The board can use either a 3.3V or a 5V power supply. It is also possible to use the boards power supply as the Input, by resoldering the on-board INPUT SEL jumper.

Overview
CategoryLinear
ApplicationsRegulating linear power supplies for a wide variety of devices
Key components
On-board modulesLM317-M, MCP4921 12-bit DAC, MCP3204 12-bit ADC, ZXMP7A17K MOSFET, LMx58 Low-Power, Dual-Operational Amplifier
Features
Key featuresInput Output screw terminals
Interfaces
InterfaceSPI
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V
Physical
Click board sizeL (57.15 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Ordering information
Part number (SKU)MIKROE-2443
ManufacturerMikroelektronika d.o.o.
EAN8606015078991
Warranty12 months
Shipping weight0.027 kg
  • 1 × VREG Click Board™

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.