
Overview
The ACT USB-C Bundle includes the following Modules:
- Advanced Cable Tester v2 USB Type-C to USB Type-C module
- Advanced Cable Tester v2 USB Type-C to USB Standard-A module
- Advanced Cable Tester v2 USB Type-C to USB Micro-B module
- Advanced Cable Tester v2 USB Type-C to USB Standard-B module
- Individually measure the DC resistance of VBUS and GND wires
- Individually measure the DC resistance of VBUS and GND pins in the USB Type-C connector
- Verify wiring is correct with no shorted or disconnected wires
- Testing of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps.
- This is all you will need for testing USB Type-C cables, whether USB 2.0, USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2
Test Compatibility/Coverage
- USB 3.2/3.1/3.0/2.0
- PD 2.0, PD 3.0
- Short testing - Dynamic visualization of test results
- Open testing - Dynamic visualization of test results
- Continuity testing - Dynamic visualization of test results
- DC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires, continuity check only on high-speed data lines
- Signal integrity testing of data lines to 12.8 Gbps per channel
- E-Marker verification
| Ordering information | |
|---|---|
| Part number (SKU) | TP825010 |
| Manufacturer | Total Phase, Inc |
| EAN | 5055383620678 |
| Shipping weight | 2.0 kg |
- Warranty: 2 years
Advanced Cable Tester Module Bundle - USB-C compared with Advanced Cable Tester Module Bundle - Video on 7 specifications.
| Specification | This product
Advanced Cable Tester Module Bundle - USB-CTP825010Available to order |
Advanced Cable Tester Module Bundle - VideoTP825210Available to order |
|---|---|---|
| Modules included | 4 | 4 |
| Bundle contents | 1 x each: C-to-C, C-to-A, C-to-Micro-B, C-to-B | 2 x HDMI Type-A to Type-A; 2 x DisplayPort to DisplayPort |
| Cable types covered | USB Type-C, Standard-A, Micro-B, Standard-B | HDMI, DisplayPort |
| Cable standards | USB 3.2/3.1/3.0/2.0; PD 2.0, PD 3.0 | HDMI Cat 1/2/3 (HEAC optional); DisplayPort 1.4 and earlier |
| Max signal integrity test rate | Up to 12.8 Gbps per channel | Up to 12.8 Gbps per channel |
| E-marker verification | Supported | Not listed |
| Apple MFi tests | Not listed | Not listed |
| Price | €2.116,95 | €2.116,95 |
Engineer Q&A
Questions and Answers
No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.