Comparator Click Example
Video notes

The Comparator Click Board™ from MikroElektronika is a voltage comparator on a Click Board™ add-on board carrying an LM2903 precision voltage comparators. This LM2903 IC features two independent voltage comparators, two pairs of screw terminals (additional two screw terminals are for GND connections), and two potentiometers.
It can be used with either a single or dual power supply over a wide range of voltages. The screw terminals allow the user to connect separate inputs, while the two potentiometers, placed between the screw terminals and the IC, configure the setpoint voltage. Each input has its own interrupt pin on the socket, i.e., one through the MikroBUS INT pin, the other in place of the default MikroBUS AN pin.
The Comparator Click Board™ is designed to use either a 3.3V or a 5V power supply.
Video notes
Videos are hosted on YouTube and load only when you press play.
The LM2903 IC consists of two independent precision voltage comparators on the Click Board™ that operate over an extensive range of voltages. The comparators can operate from a single power supply as well as dual supplies.
When paired with analog sensors, the Comparator Click Board™ allows user to hook up an analog signal. The voltage from this analog signal is used as an input and compared with the physical value set as a reference by using the potentiometer. The device will then digitally check if your input voltage is higher or lower than the referenced value. If the input value exceeds, an interrupt signal is triggered.
The Comparator Click Board™ is designed to be used with single or dual power supply. For single power supply,
| Overview | |
|---|---|
| Category | ADC |
| Applications | A/D converters, Wide range VCO, MOS clock generator |
| Key components | |
| On-board modules | LM2903 IC |
| Features | |
| Key features | Two pairs of input screw terminals and two potentiometers |
| Interfaces | |
| Interface | GPIO |
| Compatibility | mikroBUS™ |
| Electrical | |
| Input voltage | 3.3V or 5V |
| Physical | |
| Click board size | L (57.15 x 25.4 mm) |
| Compliance | |
| Country of origin | Serbia |
| RoHS | Compliant |
| Additional specifications | |
| Range | 2-36 VDC (single power supply); ±1.0 VDC- ±18 VDC (dual power supply) |
| Ordering information | |
| Part number (SKU) | MIKROE-1915 |
| Manufacturer | Mikroelektronika d.o.o. |
| EAN | 8606015076614 |
| Warranty | 12 months |
| Shipping weight | 0.03 kg |
Contact us to confirm the full contents of the box.
No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.