Skip to product information
1 of 4

Mikroelektronika d.o.o.

SRAM Click Board™

SRAM Click Board™

SKU: MIKROE-1902

Regular price
€22,95 EUR exc tax
Regular price Sale price
€22,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock shown above, check availability

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

The MikroE SRAM Click Board™ is a storage add-on board that carries the 23LC1024 IC, which allows the user to add 1Mbit of additional SRAM (static RAM) memory to the device. Based on low-power CMOS technology, the 23LC1024 chip outlines the memory in 8-bit instruction registers and 32-byte pages (128K x 8-bit). For Read and Write operations, this highly reliable chip offers byte, page, and sequential operating modes. The sequential mode enables Read/Write operation for an entire memory array.

It supports unlimited Read/Write cycles to the memory array with zero Write time. It operates at a clock rate of 20 MHz for all three Read/Write modes. Communicating through the SPI-Compatible bus interface, the board also has an additional Hold pin functionality in place of the default RST pin.

The SRAM Click Board™ can be used with either 3.3V or 5V power supply.

Videos

SRAM Click Example

MikroElektronika · 0:46 · 2015

Video notes

SRAM Click adds 1 Mbit of SRAM using the 23LC1024, connected over SPI. MikroE shows the board running its example code.

Videos are hosted on YouTube and load only when you press play.

IC/Module: 23LC1024

23LC1024 IC allows user to add 1 Mbit (megabit) of extra storage to your design and carry out infinite Read and Write operations to the memory array. This highly reliable and low-power chip allows memory access via a simple SPI-compatible serial bus. However, it is compatible with SPI (Serial Peripheral Interface), SDI (Serial Dual Interface) and SQI (Serial Quad Interface).

1Mbit Storage

The 1 Mbit of additional storage provided by the 23LC1024 IC is divided into the form of 8-bit instruction registers and 32-byte write pages.

SPI Interface (20 MHz clock rate)

SRAM Click Board™ communicates with the target microcontroller through the mikroBUS SPI interface using the MISO, MOSI, SCK, CS pins. It has an additional HOLD functionality provided through the default mikroBUS RST pin. When the HLD pin is pulled low, it causes suspension of the data transmission mid-sequence rather than causing the reset of the whole sequence.

Overview
CategorySRAM
ApplicationsAdditional 1 MBit SRAM storage for your designs
Key components
On-board modules23LC1024 chip
Features
Key features1 MBit of SRAM memory, 8-bit registers, 32-byte pages
Interfaces
InterfaceSPI, GPIO
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V
Physical
Click board sizeS (28.6 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Ordering information
Part number (SKU)MIKROE-1902
ManufacturerMikroelektronika d.o.o.
EAN8606015076683
Warranty12 months
Shipping weight0.024 kg
  • 1 × SRAM Click Board™

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.