Mikroelektronika d.o.o.
LIN Hall Click Board
LIN Hall Click Board
Couldn't load pickup availability
Introduce a linear Hall sensor to your design with the LIN HALL Click Board™. The board includes a Melexis MLX90242 linear Hall sensor IC along with an MCP3201 12-bit ADC. The LIN HALL Click Board™ outputs a signal that is linearly proportional to the flux density of a magnetic field it is exposed to. A north pole magnet field will increase the output, while a south pole field decreases it. Using the MikroBUS SPI lines (CS,.SCK, MISO),
LIN HALL Click Board™ communicates with the target board microcontroller. It uses either a 3.3V or 5V power supply (default is 3.3V).
The linear Hall sensors are used to infer the linear or rotary position of a target object, provided there is a magnet attached or something to disturb an existing magnetic field. It is an ideal choice to measure the strength of different magnets or measure the distance of a magnet from the sensor.
IC/Module: MLX90242 Linear Hall Sensor IC
Melexis MLX90242 is a CMOS linear Hall Effect sensor IC with integrated active error correction circuitry that virtually eliminates the offset errors normally associated with analog hall-effect devices.
Output Proportional to Density of the Magnetic Flux
Lin Hall Click Board™ offers an output proportional to the density of the magnetic flux to which it is exposed. The output signal increases when a north magnetic field is applied, while a south magnetic field decreases the output signal.
SMD Jumpers
Lin Hall Click Board™ is designed to use either a 3.3V or a 5V power supply, selectable through two solder jumpers. By default, the two jumpers are soldered in 3.3V position.
LIN Hall Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.