Skip to product information
1 of 4

Mikroelektronika d.o.o.

Hall Current Click Board™

Hall Current Click Board™

SKU: MIKROE-1578

Regular price
€51,95 EUR exc tax
Regular price Sale price
€51,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock shown above, check availability

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

The Hall Current Click Board™ is a measurement add-on board intended to measure the current utilizing the Hall Effect. The board features a high-precision galvanically isolated TLI4970-D050T4 magnetic digital current sensor in a tiny footprint. The Hall current Click Board™ is equipped with two EXTreme ZPower connectors (IP- and IP+) to connect a conducting wire. Split the conducting wire and connect the ends to the two connectors. The current rail is galvanically isolated from the interface to the microcontroller to keep the surrounding circuitry safe. The sensor detects the strength of the current, then sends the measurement data to the target MCU through MikroBUS SPI (SDO, SCK and CS) lines.

The Hall Current Click Board™ is based on the contact-free measurement principle, which causes no additional power loss and makes it perfectly suited for high-efficiency systems. It is designed to use a 3.3V power supply only. The board is an ideal choice for photovoltaic and general-purpose inverters, power supplies (SMPS), battery chargers, lighting applications, and electrical drives.

The Hall Current Click Board™ is a high precision current sensor. It carries a galvanically isolated TLI4970-D050T4 miniature magnetic digital current sensor that utilizes the Hall effect to measure electric current. The board carries two EXTreme ZPower connectors (IP- and IP+) to connect the conductor. The current rail is galvanically isolated from the interface to the microcontroller. The sensor readings are sent to the target board through the mikroBUS SPI (SDO, SCK, and CS) lines. The board uses a 3.3V power supply only. Use caution when working with current and the Hall Current Click Board™.

DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON!

Note: The Hall Current Click Board™ has exposed pins/pads. To stay safe take precaution when applying high voltage to the click. The click is to be used by trained personnel only when applying high voltage.

IC/Module: TLI4970-D050T4 Magnetic Current Sensor

TLI4970-D050T4 is a fully digital, high precision, coreless current sensor that uses the Hall Effect to measure electric current. This miniature contact-free current sensor has an AC & DC measurement range up to.

Overview
CategoryCurrent sensor
ApplicationsHall current click is perfectly suited for systems that require high efficiency because the contact-free measurement principle causes no additional power loss
Key components
On-board modulesTLI4970-D050T4 miniature magnetic digital current sensor
Features
Key featuresUtilizes the Hall effect to measure current
Interfaces
InterfaceSPI, GPIO
CompatibilitymikroBUS™
Electrical
Input voltage3.3V
Physical
Click board sizeL (57.15 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Ordering information
Part number (SKU)MIKROE-1578
ManufacturerMikroelektronika d.o.o.
EAN8606015075280
Warranty12 months
Shipping weight0.036 kg
  • 1 × Hall Current Click Board™

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.