Skip to product information
1 of 5

Mikroelektronika d.o.o.

Current Click Board™

Current Click Board™

SKU: MIKROE-1396

Regular price
€52,95 EUR exc tax
Regular price Sale price
€52,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock shown above, check availability

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

The MikroE Current Click Board™ is a complete electric current measurement solution that supports bandwidth up to 500 kHz. This add-on board includes a high-speed, voltage output INA196 current shunt monitor, a 12-bit resolution MCP3201 ADC, a low-dropout, micropower MAX6106 voltage reference, as well as two on-board screw terminals.

The Current Click Board™ is an add-on board used for measurement of electric current. It features INA196 current shunt monitor, MCP3201 12-bit ADC, MAX6106 voltage reference as well as two screw terminals. The click is designed to run either 3.3V or 5V power supply. It communicates with the target microcontroller over SPI interface with additional functionality provided by the AN pin on the mikroBUS™ line.

How Does The Current Click Board™ Work?

The Current Click Board™ serves as the current measurement device. The board receives current from the output circuit connected to IN(+) and OUT(-) pins of the first screw terminal. INA196 IC converts this current into a voltage. The second screw terminal is used for the external shunt.

In order to measure current values in various bands, you need to provide the shunt of the appropriate value.

The Current Click Board™ can be used for DC Current measurement in the range of 2-2048mA depending on shunt resistor.

Four shunts with different values are provided in the package.

SMD Jumpers

The Current Click Board™ communicates with the main board microcontroller via SPI interface (using ADC) or via AN line (directly connected to the microcontroller AN pin) depending on the position of the J1 SMD jumper. This jumper is soldered in ADC position. The zero-ohm SMD jumper (J1) is used to select whether 3.3V or 5V power supply is used. Jumper J1 is soldered in 3.3V position by default.

Key features

  • INA196 current shunt monitor
  • MCP3201 12-bit ADC
  • MAX6106 voltage reference
  • SPI interface
  • 3.3V or 5V power supply
Overview
CategoryCurrent sensor
ApplicationsBoard is an excellent choice for current measurement in wide ranges of values, from 2mA to 2048mA (depending on the connected shunt)
Key components
On-board modulesINA196 current shunt monitor, MCP3201 12-bit ADC, MAX6106 voltage reference
Features
Key featuresFour shunts provided in the package: 0.05Ω, 0.2Ω, 1Ω and 10Ω
Interfaces
InterfaceSPI, Analog
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V
Physical
Click board sizeM (42.9 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Ordering information
Part number (SKU)MIKROE-1396
ManufacturerMikroelektronika d.o.o.
EAN8606015074436
Warranty12 months
Shipping weight0.04 kg
  • 1 × Current Click Board™

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.