
Overview
The Lineeye SI-35USB converts USB to RS-422/RS-485 with 3000 Vdc signal isolation between the USB port and the serial line. It is bus powered, has a metal housing and runs from -10 to 55 °C, for factory automation and inspection systems.
The Lineeye SI-35USB is a USB to RS-422/RS-485 interface converter with 3000 Vdc signal isolation, baud rates from 300 bps to 3 Mbps and power taken from the USB bus. Its virtual COM port driver presents the converter to Windows 7 to 11 as a standard serial port for driving 2-wire RS-485 multidrop lines of up to 128 units or 4-wire RS-422 full-duplex links. Lineeye designed it for factory automation equipment and inspection systems, with a metal housing and an operating range of -10 to 55 °C.
Who It Is For
Connecting a Windows test PC to an RS-485 multidrop line on an inspection system, with the PC isolated from the line. Running a 4-wire RS-422 full-duplex link between a control PC and factory equipment. Commissioning RS-485 field devices from a laptop with automatic driver control.
It suits test and automation engineers who need an isolated, bus-powered RS-422/485 port for COM port software.
See the full range of RS-485 interfaces and RS-422 interfaces, or browse the Lineeye range.
3000 Vdc Isolation Between USB and RS-422/485
Signal isolation between the USB port and the RS-422/485 lines is rated at 3000 Vdc. Lineeye specifies the metal housing for noise resistance in factory equipment. Power comes from the USB bus at 5 V ±10%: 150 mA in normal operation and 250 mA maximum including inrush at power-on.
2-Wire RS-485 or 4-Wire RS-422 on a Push-In Terminal Block
The serial side is a 5-pole push-in terminal block carrying TR+, TR-, GND, R+ and R-, taking AWG 24 to 14 wire (0.2 to 2.5 mm² solid, 0.2 to 1.5 mm² stranded). DIP switch SW-B SW2 selects the line mode. In 2-wire half-duplex RS-485 only TR+ and TR- are used and R+/R- stay unconnected; in 4-wire full-duplex RS-422 the transmit and receive pairs are separate. SW-B SW3 and SW4 switch a 100 Ω termination onto the transmit and receive pairs.
RS-485 Driver Control and 128-Unit Multidrop
On an RS-485 bus the converter enables its driver automatically at the start of the transmitted data and releases it immediately after the last byte. DTR or RTS control of the driver can be selected instead with SW-A SW4 and SW5. A line-monitoring function reports through the virtual COM port's CTS line when no other device has transmitted for a set time. Up to 128 units can share one multidrop line, and Lineeye states an RS-422/485 extension distance of up to 1.2 km.
Windows Driver and Mounting Options
The included virtual COM port driver supports Windows 7, 8, 8.1, 10 and 11 in 32-bit and 64-bit versions. Data format is 7 or 8 data bits, even, odd or no parity and 1 or 2 stop bits, with Xon/Xoff or RTS/CTS flow control. M3 screw holes on the back allow panel mounting, and DIN rail (SI-DIN70 or SI-DIN30S), wall bracket (SI-WM1) and magnet (SI-MG70) mounting are available as Lineeye options.
Specifications
| PC interface | USB 1.1/2.0 full speed, type B connector |
|---|---|
| Serial interface | RS-422/RS-485, full duplex or half duplex |
| Isolation | 3000 Vdc signal isolation |
| Baud rate | 300 bps to 3 Mbps (some settings above 1.2 Mbps may not be available) |
| Data format | 7 or 8 data bits; even, odd or no parity; 1 or 2 stop bits |
| Flow control | Xon/Xoff, RTS/CTS |
| Serial connector | 5-pole push-in terminal block (TR+, TR-, GND, R+, R-), AWG 24 to 14 |
| Termination | 100 Ω on TXD and RXD, switch selectable |
| Multidrop | Up to 128 units |
| Extension distance | Up to 1.2 km |
| Indicators | TXD, RXD, PWR LEDs |
| Power | USB bus power, 5 V ±10%, 250 mA max (150 mA normal), 1.3 W max |
| Operating temperature | -10 to 55 °C |
| Storage temperature | -20 to 75 °C |
| Humidity | 10 to 90% RH, non-condensing |
| Dimensions | 65 (W) x 90 (D) x 22 (H) mm, excluding protrusions |
| Weight | Approx. 200 g |
| Operating systems | Windows 7, 8, 8.1, 10, 11 (32-bit and 64-bit) |
| Compliance | RoHS (10 substances) |
Limitations
- RS-422 and RS-485 only. There is no RS-232 or TTL-level port.
- Some baud rate settings above 1.2 Mbps may not be available, depending on the application software.
- Lineeye lists Windows drivers only. Windows 98, 98SE, Me and 2000 are not supported.
- DIN rail, wall and magnet mounting need Lineeye option parts, which are not included.
- Lineeye recommends the newer SI-35USB-2 as a direct replacement (see the comparison below).
SI-35USB Compared with the SI-35USB-2
| Feature | SI-35USB | SI-35USB-2 |
|---|---|---|
| Isolation | 3000 Vdc | 3000 Vdc |
| Baud rate | 300 bps to 3 Mbps | 300 bps to 3 Mbps |
| Dimensions | 65 x 90 x 22 mm | 58 x 80 x 22.5 mm |
| Weight | Approx. 200 g | Approx. 160 g |
| Operating temperature | -10 to 55 °C | -20 to 60 °C |
| CE marking | Not listed | CE Class A, EN 61326-1:2013 |
| Price | €219,95 | €219,95 |
What's Included
- SI-35USB interface converter
- USB cable (1.8 m)
- Utility CD with virtual COM port driver
- Instruction manual (Japanese)
An English instruction manual covering the SI-35USB and SI-35USB-2 is linked in the sources below.
Order the Lineeye SI-35USB at €219,95 ex VAT. For CE marking or -20 to 60 °C operation, choose the SI-35USB-2, or contact us for a formal quotation.
Frequently Asked Questions
Does the SI-35USB Support 2-Wire RS-485?
Yes. Set DIP switch SW-B SW2 to 2-wire half duplex and wire TR+ and TR- only, leaving R+ and R- unconnected. The driver is enabled automatically during transmission, or by DTR or RTS if selected on SW-A.
Answered by John Legg, Director, Debug Store
What Is the Maximum Baud Rate?
3 Mbps, from a minimum of 300 bps. The rate is set in the application software through the virtual COM port, and Lineeye notes that some settings above 1.2 Mbps may not be available.
Answered by John Legg, Director, Debug Store
Does It Need an External Power Supply?
No. The SI-35USB runs from USB bus power at 5 V, drawing 150 mA in normal operation and up to 250 mA including inrush at power-on.
Answered by John Legg, Director, Debug Store
What Is the Difference Between the SI-35USB and the SI-35USB-2?
Function and performance are the same, and Lineeye describes the SI-35USB-2 as a direct replacement. The SI-35USB-2 is smaller (58 x 80 x 22.5 mm, about 160 g), CE marked and rated for -20 to 60 °C operation.
Answered by John Legg, Director, Debug Store
Last reviewed: 30 October 2026
| Ordering information | |
|---|---|
| Part number (SKU) | SI-35USB |
| Manufacturer | Lineeye Co Ltd |
| EAN | 5055383620906 |
| Warranty | 12 months |
| Shipping weight | 0.5 kg |
- 1 ×SI-35USB interface converter
- 1 ×USB cable (1.8 m)
- 1 ×Utility CD-ROM
- 1 ×Instruction manual
Questions and Answers
No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.