Skip to product information
1 of 4

Mikroelektronika d.o.o.

Boost 4 Click Board™

Boost 4 Click Board™

DC to DC Step-Up Converter

SKU: MIKROE-2757

Regular price
€25,95 EUR exc tax
Regular price Sale price
€25,95 EUR exc tax
Sale Sold out
Shipping calculated at checkout.
If no stock shown above, check availability

Payment methods

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
View full details

Overview

The Boost 4 Click Board™ carries the TPS61230A, high efficiency fully integrated synchronous boost converter from Texas Instruments. The Click Board™ is designed to run on a 3.3V power supply.

The Boost 4 Click Board™ drives the target chip through the Digipot, which has SPI communication with the microcontroller on the system.

The Boost 4 Click Board™ carries the TPS61230A, a high efficiency fully integrated synchronous boost converter from Texas Instruments. The click is designed to run on a 3.3V power supply. Boost 4 click drives the target chip through the digi pot, which has SPI communication with the microcontroller on the system.

Boost 4 click is the power management solution for your next project.

How Does The oost 4 Click Board™ Work?

The Boost 4 Click Board™ provides an adjustable output voltage through the SPI DAC, that drives the FB pin to set desired voltage. The click is capable of delivering up to 2.4-A output current at a 5V output with the 2.5-V input supply.

TPS61230A FEATURES

The TPS61230A device is a high efficiency fully integrated synchronous boost converter. It integrates 6-A, 21-mΩ and 18-mΩ power switches.

During the light load condition, the TPS61230A automatically enters into the PFM operation for maximizing the efficiency with the lowest quiescent current. In the shutdown by pulling EN pin to the logic low, the load is completely disconnected from the input, and the input current consumption is reduced to below 1.0 μA.

SPECIFICATIONS

Type Boost
Applications Battery powered products, battery backup units, etc.
On-board modules TPS61230A, a high efficiency fully integrated synchronous boost converter from Texas Instruments
Key Features Input Voltage Range: 2.5 V to 4.5 V, output Voltage Range: 2.5 V to 5.5 V
Interface SPI
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)
Input Voltage 3.3V

Pinout Diagram

This table shows how the pinout of the Boost 4 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
NC 1 AN PWM 16 NC
Enable pin EN 2 RST INT 15 NC
Chip select CS 3 CS TX 14 NC
SPI clock SCK 4 SCK RX 13 NC
SDO 5 MISO SCL 12 NC
Slave data in for SPI SDI 6 MOSI SDA 11 NC
NC 7 3.3V 5V 10 NC
Ground GND 8 GND GND 9 GND Ground

Overview
CategoryBoost
ApplicationsBattery powered products, battery backup units, etc.
Key components
On-board modulesTPS61230A, a high efficiency fullyintegrated synchronous boost converter from Texas Instruments
Interfaces
InterfaceSPI
CompatibilitymikroBUS™
Electrical
Input voltage3.3V
Physical
Click board sizeM (42.9 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Additional specifications
Input voltage range2.5 V to 4.5 V, output
Voltage range2.5 V to 5.5 V
Ordering information
Part number (SKU)MIKROE-2757
ManufacturerMikroelektronika d.o.o.
EAN8606018711451
Warranty12 months
Shipping weight0.025 kg
  • 1 × Boost 4 Click Board™

Contact us to confirm the full contents of the box.

Engineer Q&A

Questions and Answers

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.