Adapter Click Board
Adapter Click Board
The Adapter Click Board™ is a breakout board to add MikroBUS to the IDC10 adapter to the user design. This accessory board is intended to easily connect IDC10 headers to the seventh generation development boards with MikroBUS sockets. It also has 2x5 connection pads that are compatible with MikroElektronika's IDC10 modules. Adapter Click Board™ features two ways of establishing the connection: using male or female IDC10 connectors, or using an IDC10 flat cable and soldering it either on the top or the bottom side. However, in some cases, a female header socket is a better choice, depending on the user and design convenience.
The Adapter Click Board™ has two jumpers: one for SPI/I2C selection and another one for the selection of power supply range. Adapter Click Board™ is designed to use a 3.3V or 5V power supply. Adapter Click Board™ communicates using MikroBUS.
The Adapter Click Board™ is also ideal for connecting the I2C or SPI Bus to a target board using the Tag-Connect TC2030-IDC pogo-pin cables.
Two Ways of Establishing Connection
The user can establish a connection using male or female IDC10 connectors (provided with the package). The male IDC10 header can be soldered on the top side of Adapter Click Board™ and connected to the add-on board directly or through IDC10 flat cable. The female header socket seems as a superior choice in some cases. The user can solder the header either on the top or the bottom, depending on what seems more convenient according to the circumstance.
Two Jumpers
Adapter Click Board™ features two jumpers: one for communication interface selection between SPI or I2C and other is to choose between 3.3V or 5V power supply.
Adapter Click Board
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.