Aaronia SPECTRAN V6 XPR 100XA-WR10

The Aaronia SPECTRAN V6 XPR 100XA-WR10 is a USB real-time spectrum analyser for millimetre-wave work, covering 75 GHz to 110 GHz through a WR10 waveguide input, with 60 MHz real-time bandwidth, a sweep speed of 3 THz/s and DANL of -170 dBm/Hz. Aaronia positions the V6 XPR range as a compact, lower-cost platform for developing and validating millimetre-wave systems, from radio relay links to radar.

75 GHz to 110 GHz on a WR10 Waveguide Input

The SPECTRAN V6 XPR 100XA-WR10 takes its signal through a WR10 waveguide input. Aaronia lists coverage of the W band and F band satellite bands. The receive path offers 60 MHz real-time bandwidth with an I/Q probability of intercept quoted as 30 ns and 20 ns, so short bursts and pulsed signals are captured rather than missed between sweeps.

USB Analyser With RTSA-Suite PRO

The analyser connects to a PC over USB and runs Aaronia's RTSA-Suite PRO software, which Aaronia states turns the V6 XPR into a fully featured benchtop spectrum analyser. Its compact size suits both lab benches and field measurements, such as aligning a millimetre-wave link on a mast.

Specifications

Limitations

• Aaronia's product page shows this model as awaiting release, with delivery after release; ask us for the current status before ordering.
• We have not found a technical datasheet for the V6 XPR in Aaronia's download area, so figures such as input power limit, amplitude accuracy and power requirements are not given here. Ask us before ordering for a specification-critical application.
• The WR10 waveguide input covers 75 GHz to 110 GHz only. For other frequency ranges, ask us which SPECTRAN V6 model covers your band.
• It is a USB analyser and works with RTSA-Suite PRO running on a connected PC.

SPECTRAN V6 ECO XPR 100XA Models Compared

Typical Applications

Setting up and checking radio relay links in the millimetre-wave bands. Testing radar sensors and automotive distance control systems, which Aaronia names among the V6 XPR applications. Monitoring and validating satellite signals across the W band and F band.

The SPECTRAN V6 XPR 100XA-WR10 suits RF and microwave engineers who need real-time analysis from 75 GHz to 110 GHz without the cost and size of a benchtop millimetre-wave analyser.

Request a formal quotation for the SPECTRAN V6 XPR 100XA-WR10, or contact us to check release timing and the waveguide components you need.

Frequently Asked Questions

Which SPECTRAN V6 ECO XPR 100XA Model Do I Need?

Choose the waveguide band that covers your signal: WR15 for 50 GHz to 75 GHz, WR12 for 60 GHz to 90 GHz, WR10 for 75 GHz to 110 GHz and WR08 for 90 GHz to 140 GHz.

Answered by John Legg, Director, Debug Store

How Does the SPECTRAN V6 XPR 100XA-WR10 Connect to My Antenna?

Through a WR10 waveguide input. Your antenna or test setup needs a matching WR10 waveguide interface.

Answered by John Legg, Director, Debug Store

What Software Does the SPECTRAN V6 XPR 100XA-WR10 Use?

Aaronia's RTSA-Suite PRO, running on a connected PC.

Answered by John Legg, Director, Debug Store

Is the SPECTRAN V6 XPR 100XA-WR10 Available Now?

Aaronia's product page lists it as awaiting release. Contact us for the current delivery status.

Answered by John Legg, Director, Debug Store

What Real-Time Bandwidth Does the SPECTRAN V6 XPR 100XA-WR10 Have?

60 MHz, with a sweep speed of 3 THz/s for wider spans.

Answered by John Legg, Director, Debug Store

Last reviewed: 31 October 2026