Aaronia PowerLOG 70180

The Aaronia PowerLOG 70180 is a double-ridged horn antenna covering 700 MHz to 18 GHz, with 2 to 17 dBi gain and a maximum input power of 500 W (peak), 300 W (CW). It has an N (female) connector, measures 235 x 252 x 175 mm and weighs 1400 g, and is suitable for both transmitting and receiving in EMC immunity and emissions work.

High Input Power for Immunity Testing

Aaronia rates the PowerLOG 70180 at 500 W (peak), 300 W (CW), which is why it suits radiated immunity testing where an amplifier drives the antenna to produce high field strengths, as well as receive work. Gain rises across the band to 17 dBi, typical VSWR is below 3:1.

Broadband Coverage From One Horn

One dual-ridged horn covers 700 MHz to 18 GHz, so a sweep across the band needs no antenna change. The N (female) connector suits high-power cabling. The housing measures 235 x 252 x 175 mm, the antenna weighs 1400 g, and Aaronia gives an operating range of -40 °C to +85 °C and 0 to 95% relative humidity.

Calibration Data Included

Specific calibration data and a mounting plate are included. With the antenna factor applied, the spectrum analyser reading converts to field strength, and in transmit use the gain figures let you work out the field strength produced at the test distance.

Specifications

Limitations

• A horn is directional: it must be aimed at the device under test, and its coverage at short distances is limited by the beamwidth.
• Transmit use is subject to local radio regulations.
• At 1400 g and 235 x 252 x 175 mm it needs a solid tripod or mast; Aaronia recommends its heavy tripod.
• Typical VSWR is below 3:1, against below 2.5:1 for the 10800.

PowerLOG Range Compared

Typical Applications

Radiated immunity testing where a power amplifier drives the horn to the required field strength. Radiated emissions measurements above 1 GHz.

The PowerLOG 70180 suits EMC test engineers and RF and microwave engineers who need a calibrated horn for 700 MHz to 18 GHz.

What's Included

• PowerLOG 70180 antenna
• Mounting plate
• Calibration data

Request a formal quotation for the PowerLOG 70180, or contact us to check it against your amplifier, analyser and test distance before you order.

Frequently Asked Questions

Which PowerLOG Model Do I Need?

Choose by frequency range. The 10800 covers 1 GHz to 8 GHz, the 70180 700 MHz to 18 GHz, the 40400 4 GHz to 40 GHz and the 50700 5 GHz to 70 GHz. The 70180 has the highest published power rating (500 W peak), followed by the 10800 (400 W peak); Aaronia gives no rating for the 50700.

Answered by John Legg, Director, Debug Store

Can the PowerLOG 70180 Transmit and Receive?

Yes. Aaronia states the PowerLOG series is suitable for both transmitting and receiving, within local radio regulations. The maximum input power is 500 W (peak), 300 W (CW).

Answered by John Legg, Director, Debug Store

Is Calibration Data Supplied With the PowerLOG 70180?

Specific calibration data and a mounting plate are included.

Answered by John Legg, Director, Debug Store

Which Cable Do I Need for the PowerLOG 70180?

One with an N connector at the antenna end, rated to 18 GHz and to the power you intend to transmit.

Answered by John Legg, Director, Debug Store

How Is the PowerLOG 70180 Mounted?

On the supplied mounting plate. Aaronia recommends its heavy tripod for the PowerLOG antennas.

Answered by John Legg, Director, Debug Store

Last reviewed: 31 October 2026