ZeroPlus Technology Co Ltd
ZeroPlus LAP-C-16032 LogicCube Logikanalysator
ZeroPlus LAP-C-16032 LogicCube Logikanalysator
Verfügbarkeit für Abholungen konnte nicht geladen werden
Die Logikanalysator- Reihe ZeroPlus LogicCube (LAP-C) ist einer unserer meistverkauften Logikanalysatoren. Er ist mit 16 oder 32 Kanälen erhältlich und umfasst standardmäßig die Dekodierung von über 120 Protokollen.
Der LAP-C LogicCube wird an einen Host-PC angeschlossen und über seine USB-Schnittstelle mit Strom versorgt. Er ist in einem kompakten, leichten Gehäuse untergebracht, das selbst auf der aufgeräumtesten Werkbank für Aufgeräumtheit sorgt!
Zum Lieferumfang des LAP-C gehören ein USB-Kabel, Prüfleitungen, 20 Greifhaken und die neueste Software auf einem USB-Speicherstick.
TuffTest-Paket
Der LogicCube ist nur als TuffTest-Paket erhältlich. Das TuffTest-Paket umfasst einen robusten, wasserdichten Tragekoffer und zwanzig Greifhaken.
Extremely compact and lightweight, the ZeroPlus-LAP-C Logic Analyser, also known as LogicCube connects to any desktop or Laptop PC by USB, making it very portable and ideal for use in the field.
Logic Analyser Features
Start Button
The LAP-C has a START Button. When pressed, the capture of data starts. Data is then be captured quickly without having to use the software.
Data Compression
It is often challenging to capture a specific event, especially if it occurs infrequently. It is often needed to capture data for long periods until the event occurs. The capture buffer can fill up before the event occurs.
ZeroPlus employs its patented compression algorithm to avoid wasting capture buffer space.
Signal Filtering
Not all signals need to be captured. You can focus on which data needs to be captured by setting up a signal filter. This patented feature allows data to be captured only when a set of conditions are met.
The following filter conditions can be defined:
- The logic level of any input
- Specified serial data appears on a bus. A bus is a group of inputs.
Triggers
Captured data can be stored in a number of pages. This patented feature allows data to be stored on each page based on a trigger condition.
Trigger Count
It is possible to start capturing data after a Trigger Condition is met N times. This facility will help you focus on data capture more precisely.
Protocol Analysis Features
Over 120 different protocols can be analysed by the LAP-C logic analyser:
- 1-Wire (Adv) Interface
- 1-Wire Interface
- 3-Wire Interface
- 7-segment LED Interface
- AC97 Interface
- AES/EBU Interface
- AMD SVI2 Interface
- Arithmetic Logic
- BDM Interface
- BMS Interface
- CAN 2.0B Bus
- CCIR656 Interface
- CMOS Image Sensor Interface
- Compact Flash 4.1 Interface
- DALI Interface
- Differential Manchester Interface
- Digital Logic
- DMX512 Interface
- DP Aux Channel 1.1 Interface
- DSA Interface
- DSI Bus
- FlexRay 2.1A Bus
- FWH Interface
- GPIB/IEEE488 Interface
- HART Interface
- HDMI CEC Interface
- HDQ Interface
- HPI Interface
- I2C EEPROM 24L Memory Interface
- I2C EEPROM 24LCS Memory Interface
- I2C Interface
- I2S Interface
- ISO7816 UART Interface
- J-K Flip-flop
- JTAG 2.0 Interface
- KeeLoq Code Hopping Interface
- KNX Interface
- LCD12864 Display Interface
- LCD1602 Display Interface
- LED Pitch Array Interface
- LG4572 Interface
- LIN Bus 2.1
- Line Code
- LPT Interface
- Manchester Encoding
- Maxim DS1302 Interface
- Maxim DS18B20 Interface
- MDDI Interface
- MHL-CBus
- Microwire Bus
- Microwire EEPROM 93C
- MIDI Interface
- MII Interface
- Miller Interface
- MIPI CSI-2 Interface
- MIPI DSI Interface
- ModBus
- Modified Miller Interface
- Modified SPI Interface
- MVB
- NEC PD6122 Interface
- Opentherm 2.2 Interface
- PCM Interface
- PECI Interface
- Philips RC5 Interface
- Philips RC6 Interface
- ProfiBus
- PS/2 Interface
- PSB Interface
- PT2262/PT2272 Interface
- Quad SPI Interface
- RGB Interface
- S/PDIF Interface
- S2Cwire/AS2Cwire Interface
- Samsung K9 NAND Flash Interface
- SCCB Interface
- SDQ Interface
- Serial GPIO IBPI Interface
- SHT11 Interface
- Signia 6210 Interface
- Single Wire Debug (SWD) Interface
- SITI DM114/DM115 Interface
- SLE4442 Interface
- SMBus 2.0
- SPI (Atmel 25F EEPROM)
- SPI Interface
- SPI Plus Interface
- SSI Interface
- ST7669 Interface
- STBus
- SVID Interface
- UART (RS-232C/RS-422/RS-485) Interface
- UNI/O Interface
- Up/Down Counter
- USB v1.1 Interface
- WIEGAND Interface
- WTB Bus
- WWV-WWVH-WWVB Interface
- YK-5 Interface
Note: Some protocols require a fast internal clock speed. The maximum Internal Clock speed of the LAP-C(16032) is 100MHz. The LAP-C(32000) has a maximum internal clock speed of 200MHz, allowing it to decode faster bus signals.
Test Grabbers
LAP-C(16032)
Ten Test Grabbers are included with the logic Analyser. The standard LAP(16032) includes just 2 Grabbers but we have decided to include twenty (worth £45).
LAP-C(32000)
Thirty Six Test Grabbers are included with the logic Analyser.
Carrying Case
Please note that the ZeroPlus LAP-C(16032) does not include a carrying case as standard to keep the cost as low as possible. If you need a carry case, we offer the TuffTest version.
TuffTest
A professional version of the LogicCube is also available. The LogicCube is a sensitive piece of kit and needs to be looked after carefully. The TuffTest version of the LogicCube is fitted into a B&W rugged, waterproof case and protected by a foam insert to keep it safe from damage whilst being transported or stored.
The Tufftest version also includes twenty grabber hooks (worth £67).
ZeroPlus LAP-C-16032 LogicCube Logikanalysator
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.