Thunder Click-Board - Deutsch
Thunder Click-Board - Deutsch
Das Thunder Click Board™ wurde entwickelt, um das Vorhandensein und die Nähe potenziell gefährlicher Blitzaktivitäten in einem Umkreis von 40 km zu erkennen. Das Thunder Click Board™ kann außerdem die Entfernung zum Gewitterkopf in 14 Schritten von 40 km bis auf 1 km schätzen und dabei Störungen durch künstliche Signale wie Motoren und Mikrowellenherde ausblenden. Es kann auch Informationen zum Geräuschpegel liefern, was es zur idealen Wahl für Wetterstationen, Sportgeräte, USV, Stromleitungsaufbereiter, Smart Grid-Systeme, Umweltüberwachungssysteme, tragbare GPS, Fahrradcomputer usw. macht.
Das Thunder Click Board™ ermöglicht die Erkennung von Blitzaktivitäten zwischen Wolke und Boden sowie zwischen Wolke und Wolke in einem Umkreis von 40 km.
The Thunder Click Board™ features AS3935 lightning sensor as well as MA5532 coil antenna. It detects the presence and proximity of potentially hazardous lightning activity in the vicinity and provides estimated distance to the centre of the storm. It can also provide information on the noise level. The Thunder Click Board™ communicates with the target board microcontroller via SPI and INT lines. The board is designed to use 3.3V or 5V power supply. LED diode (GREEN) indicates the presence of power supply.
IC/Module: AS3935 Lightning Sensor
AS3935, a lightning sensor IC, is designed for low-power, portable or fixed wire-line applications. It utilizes a sensitive RF receiver and integrated proprietary algorithm. This lightning sensor is designed for sensing the presence and proximity of potentially harmful lightning activity in the surrounding area.
MA5532-AE Coil Antenna
Intended for antenna applications at 500 kHz to 2 MHz, MA5532-AE is designed to put up with harsh mechanical environments. The plastic base assures durability and brilliant mechanical shock resistance.
SMD Jumpers
The Thunder Click Board™ allows user to choose a 3.3V or 5V power supply, which is selectable by a zero-ohm J1 SMD jumper. By default, it is soldered in 3.3V position.
Software Support
Application Task
Always checks if an interrupt event happened (Listening mode) and after that gets the information about a storm. Results logs on UART.
void application_task ( void )
{
storm_mode = thunder_check_interr( &thunder );
if ( storm_mode == THUNDER_NOISE_LEVEL_INTERR )
{
log_printf( &logger, "Noise level too high\r\n" );
}
else if ( storm_mode == THUNDER_DISTURBER_INTERR )
{
log_printf( &logger, "Disturber detected\r\n" );
}
else if ( storm_mode == THUNDER_LIGHTNING_INTERR )
{
thunder_get_storm_info( &thunder, &storm_energy, &storm_distance );
log_printf( &logger, "Energy of the single lightning : %ld\r\n", storm_energy );
log_printf( &logger, "Distance estimation : %d km\r\n", storm_distance );
}
}
Thunder Click-Board - Deutsch
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.