MikroMedia 7 für STM32 Shield
MikroMedia 7 für STM32 Shield
Overview
Das M ikroMedia™ 7 für STM32 Shield ist die perfekte Möglichkeit, die Funktionalitäten Ihres mikroMedia™ 7 für STM32F4 und mikroMedia™ 7 für STM32F7 mit fünf mikroBUS-Sockeln zu erweitern – fügen Sie beliebige Funktionen aus unserem ständig wachsenden Angebot an Click Boards™ hinzu. Wir sind mit allem ausgestattet, von Sensoren und WLAN-Transceivern bis hin zu Motorsteuerung und Audioverstärkern.
The mikroMedia™ 7 for STM32 Shield is the perfect way to expand the functionalities of your mikroMedia™ 7 for STM32F4 and mikroMedia™ 7 for STM32F7 with five mikroBUS sockets - add any functionality from our ever-growing range of Click Board™s. We are fully stocked with everything from sensors and wifi transceivers to motor control and audio amplifiers.Click Board™ here to learn more about the mikroMedia™ 7 for STM32F4 and mikroMedia™ 7 for STM32F7.
What's on the mikroMedia™ 7 for STM32 Shield ?
The mikroMedia™ 7 for STM32 Shield features a UART select jumper, 5 mikroBUS sockets, connection pads, FTDI USB-UART converter and an external power supply screw terminal.
The Click Board™ range
As you already know, our Click Board™ range is constantly growing - hundreds of different functionalities are available in our store. From sensors and wireless transceivers to motor control and LED displays.
UART interfaces
There are 2 UART interfaces available on the shield, routed from the mikroMedia™ 7 for STM32. One of the mikroBUS slots - mikroBUS 5 - can have either one of the two UART lines routed to the mikroMedia™ 7 for STM32, selectable by the mikroBUS 5 UART jumper selector. Other 4 mikroBUS slots are hardwired to one UART only.
The shield also has the FT232 USB to UART circuit on board. Its RX and TX lines can also be routed to any of the two UART interface lines of the mikroMedia™ 7 for STM32, by using the UART SELECT jumper selectors. The integrated USB to UART interface is very handy for connecting the shield to the computer and reading UART data on any UART terminal - it is recommended to use the UART terminals, found in every MikroElektronika compiler since those terminals are easy to use and are optimized for working in embedded development environment.
Note: If the WiFi SMD jumper is set to enable the WiFi on the mikroMedia™ for STM32, one of the UART lines wont be available on the shield.
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.