Mikroelektronika d.o.o.
1-Wire Switch Click-Platine
1-Wire Switch Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- Konfiguriert als Open-Drain, parasitäre Stromversorgung über 1-Wire, hohe Leistung, einzigartige 64-Bit-ROM, werkseitig gelaserte Seriennummer, geringer Stromverbrauch, wählbarer Kommunikations-Pin und mehr
- Basierend auf dem DS2413 - Zweikanal-1-Wire-Schalter von Analog Devices
- Kann für die industrielle Steuerung, Keypicking-Systeme, Zubehöridentifikation und -steuerung und mehr verwendet werden
- mikroBUS: GPIB-Schnittstelle
Das 1-Wire Switch Click Board™: Fernumschalten von Geräten leicht gemacht
Das 1-Wire Switch Click Board™ ist die perfekte Lösung für das Remote-Schalten von Geräten. Diese kompakte Zusatzplatine verwendet den DS2413, einen leistungsstarken programmierbaren Zweikanal-E/A-1-Wire-Schalter von Analog Devices, mit dem Sie Geräte ganz einfach per Fernzugriff über ein 1-Wire-Signal schalten können. Mit dem Click Board™ erfolgen Kommunikation und Betrieb über eine einzelne serielle 1-Wire-Schnittstelle mit der Möglichkeit, Signale für die Datenverarbeitung auszuwählen.
Das 1-Wire Switch Click Board™ verfügt über eine praktische Taste und eine rote LED zum Senden/Erkennen von E/A-Signalen sowie einen zusätzlichen E/A-Header, über den Sie ein externes 1-Wire-Gerät anschließen können. Dies macht es zur idealen Wahl für eine Vielzahl von Anwendungen, einschließlich industrieller Steuerung, Keypicking-Systeme, Zubehöridentifikation und -steuerung und mehr.
Einfache Softwareentwicklung mit mikroSDK
Das 1-Wire Switch Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dies bedeutet, dass Sie das Click Board™ problemlos in Ihr vorhandenes System integrieren und sofort verwenden können. Darüber hinaus ist es als vollständig getestetes Produkt sofort mit jedem System einsatzbereit, das mit der mikroBUS™-Buchse ausgestattet ist.
Warten Sie nicht länger, um Ihre Anforderungen an das Remote-Umschalten von Geräten zu vereinfachen. Bestellen Sie noch heute Ihr 1-Wire Switch Click Board™ und erleben Sie den Komfort und die Leistung dieser erstaunlichen Zusatzplatine.
How Does The 1-Wire Switch Click Board™ Work?
The 1-Wire Switch Click Board™ is based on the DS2413, a dual-channel addressable switch from Analog Devices. The DS2413 combines two programmable I/O pins and a fully featured 1-Wire interface in a single package, ensuring that PIO output changes occur error-free. The PIO outputs are configured as open-drain, operate at up to 28V (provide a high level of fault tolerance in the end application), and have an ON-resistance of 20Ω maximum. By monitoring the voltage at its programmable I/O pins, the DS2413 lets you read back the state of the load, in this case, the state of the button, which in this configuration is in the role of input, while the output state is visually detected through the red LED marked with OUT.
The DS2413's power is supplied parasitically from the 1-Wire bus, a system with a single bus controller and one or more peripherals. With that in mind, this Click board™ has one additional unpopulated header, which enables the connection of other external 1-Wire devices, thus forming a line with several peripherals on one controller. The DS2413 also has a 64-bit long registration number that guarantees unique identification. This number addresses the device in a multidrop 1-Wire network environment, where multiple devices reside on a common 1-Wire bus and operate independently.
As mentioned, the 1-Wire Switch Click Board™ communicates with MCU using the 1-Wire interface that, by definition, requires only one data line (and ground) for communication with MCU. The 1-Wire communication line is routed to the SMD jumper labelled as I/O SEL, which allows routing of the 1-Wire communication either to the GP0 pin or the GP1 pin of the mikroBUS™ socket. These pins are labelled, respectively, the same as the SMD jumper positions, making the selection of the desired pin simple and straightforward.
The 1-Wire Switch Click Board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | 1-Wire |
| Applications | Can be used for industrial control, key-pick systems, accessory identification and control, and more |
| On-board modules | DS2413 - dual-channel 1-Wire switch from Analog Devices |
| Key Features | Configured as open-drain, parasitic power supply through 1-Wire, high performance, unique 64-bit ROM factory-lasered serial number, low power consumption, selectable communication pin, and more |
| Interface | 1-Wire |
| Compatibility | mikroBUS |
| Click board size | S (28.6 x 25.4 mm) |
| Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on 1-Wire Switch Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| 1-Wire Data IN/OUT | GP1 | 1 | AN | PWM | 16 | GP0 | 1-Wire Data IN/OUT |
| NC | 2 | RST | INT | 15 | NC | ||
| NC | 3 | CS | RX | 14 | NC | ||
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | NC | ||
| NC | 6 | MOSI | SDA | 11 | NC | ||
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| LD2 | OUT | - | Output State LED Indicator |
| JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| JP2 | I/O SEL | Left | Communication Pin Selection GP1/GP0: Left position GP1, Right position GP0 |
| J1 | - | Unpopulated | External 1-Wire Device Connection Header |
| T1 | - | - | Input State Button |
1-WIRE SWITCH CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | 3.3 | - | 5 | V |
Software Support
We provide a library for the 1-Wire Switch Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for 1-the 1-Wire Switch Click Board™ driver.
Key functions
-
c1wireswitch_set_pio_state1-Wire Switch write specific programmable I/O state function. -
c1wireswitch_get_pio_state1-Wire Switch read specific programmable I/O state function. -
c1wireswitch_get_pio_latch_state1-Wire Switch read programmable I/O latch state function.
Example Description
This library contains API for the 1-Wire Switch Click Board™ driver. The library initializes and defines the 1-Wire bus drivers to
write and read data for state programmable I/O, as well as the default configuration.
void application_task ( void )
{
uint8_t pio_a = 0;
uint8_t pio_b = 0;
c1wireswitch_get_pio_state( &c1wireswitch, &pio_a, &pio_b );
if ( pio_b == C1WIRESWITCH_PIOB_OFF )
{
if ( state == 0 )
{
c1wireswitch_set_pio_state( &c1wireswitch, C1WIRESWITCH_PIOA_ON, C1WIRESWITCH_PIOB_ON );
log_printf( &logger, " Button is pressed, LED is ON. rn " );
state = 1;
}
else
{
c1wireswitch_set_pio_state( &c1wireswitch, C1WIRESWITCH_PIOA_OFF, C1WIRESWITCH_PIOB_ON );
log_printf( &logger, " Button is pressed, LED is OFF. rn " );
state = 0;
}
Delay_ms( 100 );
}
Delay_ms( 100 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.c1WireSwitch
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. A UART terminal is available in all MikroE compilers.
MIKROSDK
The 1-Wire Switch Click Board™ is supported with mikroSDK - MikroE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
1-Wire Switch Click-Platine
Frequently Asked Questions
Ask a Question-
Can I connect multiple 1-Wire Switch Click Boards™ to my system?
Yes, you can connect multiple 1-Wire Switch Click Boards™ to your system, as long as you have enough mikroBUS™ sockets available.
-
Is the 1-Wire Switch Click Board™ easy to use?
Yes, the 1-Wire Switch Click Board™ is a fully tested product and comes ready to be used on a system equipped with the mikroBUS™ socket. Additionally, the board is supported by a mikroSDK compliant library, which includes functions that simplify software development.
-
What are some applications of the 1-Wire Switch Click Board™?
The 1-Wire Switch Click Board™ is suitable for industrial control, key-pick systems, accessory identification and control, and many more.
-
How does the 1-Wire Switch Click Board™ work?
Communication and operation of the 1-Wire Switch Click Board™ are performed using the single 1-Wire serial interface, with the possibility of selecting signals for data processing. The button and the red LED on the board allow for giving/detecting I/O signals. The board also includes an additional I/O header, which enables connection of an external 1-Wire device.
-
What is the 1-Wire Switch Click Board™?
The 1-Wire Switch Click Board™ is an add-on board that enables remote switching of a device using a 1-wire signal. It features the DS2413, a dual-channel programmable I/O 1-Wire switch from Analog Devices.