Kopfhörer AMP 2 Click Board
Kopfhörer AMP 2 Click Board
Key Features:
- Bessere Effizienz als typische Klasse-AB-Verstärker, Verstärkungsauswahl, Standby-Modus-Steuerung, geringer Stromverbrauch, leises Knack- und Klickgeräusch, Schutzfunktionen und mehr
- Basierend auf dem TS2007FC – Class-D-Audio-Leistungsverstärker von STMicroelectronics
- Kann für tragbare Elektronik und Audiosysteme verwendet werden und stellt eine perfekte Lösung für Anwendungen zur Fernsteuerung der Kopfhörerlautstärke dar
- mikroBUS: GPIO-Schnittstelle
Wir präsentieren das Headphone AMP 2 Click Board™: Die perfekte Ergänzung für Ihr Audiosystem
Suchen Sie nach einer kompakten und zuverlässigen Lösung für die Fernsteuerung der Kopfhörerlautstärke? Dann sind Sie mit dem Headphone AMP 2 Click Board™ genau richtig, der perfekten Zusatzplatine für Ihr Audiosystem.
Erleben Sie hochwertige Audioleistung
Das Headphone AMP 2 Click Board™ verfügt über den TS2007FC, einen Audio-Leistungsverstärker der Klasse D von STMicroelectronics. Mit der Fähigkeit, bis zu 2,3 W in eine 4Ω-Last bei 5 V zu treiben, erreicht der TS2007FC eine bessere Effizienz als typische Audio-Leistungsverstärker der Klasse AB. Außerdem kann er über einen mikroBUS™-Pin zwischen zwei Verstärkungseinstellungen, entweder 6 oder 12 dB, umschalten. Mit einer Schaltung zur Reduzierung von Knacken und Klicken und einem Standby-Modus für reduzierten Stromverbrauch ist diese Platine mit allen Funktionen ausgestattet, die Sie für eine erstklassige Audioleistung benötigen.
Genießen Sie einen zuverlässigen und sicheren Betrieb
Ausgestattet mit Schutzfunktionen gewährleistet das Headphone AMP 2 Click Board™ einen zuverlässigen und sicheren Betrieb. Darüber hinaus ist es für tragbare Elektronik und Audiosysteme geeignet und somit die perfekte Lösung für alle Ihre Audioanforderungen.
Vereinfachen Sie die Softwareentwicklung
Das Headphone AMP 2 Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ wird vollständig getestet und ist für den Einsatz auf jedem System mit der mikroBUS™-Buchse bereit.
Geben Sie sich bei Ihrem Audiosystem nicht mit weniger als dem Besten zufrieden. Rüsten Sie auf das Headphone AMP 2 Click Board™ auf und erleben Sie noch heute erstklassige Audioleistung!
How Does The Headphone AMP 2 Click Board™ Work?
The Headphone AMP 2 Click Board™ is based on the TS2007FC, a monolithic, fully-differential input/output, class-D power amplifier from STMicroelectronics. The TS2007FC can drive up to 2.3W into 4Ω load at 5V, achieving better efficiency than typical class-AB audio power amplifiers. It includes a common mode feedback loop that controls the output bias value to average it at half of the power supply value in the DC common mode input voltage range. This feature allows the board always to have a maximum output voltage swing and, consequently, maximizes the output power. In addition, as the load is connected differentially, compared to a single-ended topology, the output is four times higher for the same power supply voltage.
The Headphone AMP 2 Click Board™ establishes communication with MCU using two pins on the mikroBUS™ socket. The GS pin of the mikroBUS™ socket controls the TS2007FC's differential gain, set to either 6 or 12dB depending on the logic level of the GS pin. It is also possible to set the Click board™ in Standby mode, depending on the set logic level (active low) on the STB pin of the mikroBUS™ socket. When the Standby mode control pin is set to a high logic state, the time required to put the two output stages into high impedance and the internal circuitry in Shutdown mode is typically 1ms. This time decreases the gain and avoids any pop noise during Shutdown. Furthermore, the TS2007FC has several protection features like thermal Shutdown and short circuit protection allowing a reliable operation.
The Headphone AMP 2 Click Board™ can operate with either 3.3V or 5V logic voltage levels selected via the VCC SEL jumper. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
Type | Amplifier |
Applications | Can be used for portable electronics and audio systems, representing a perfect solution for remote, headphone audio-volume control applications |
On-board modules | TS2007FC - class-D audio power amplifier from STMicroelectronics |
Key Features | Better efficiency than typical class-AB amplifiers, gain selection, Standby mode control, low power consumption, low pop-and-click noise, protection features, and more |
Interface | GPIO |
Compatibility | mikroBUS |
Click board size | L (57.15 x 25.4 mm) |
Input Voltage | 3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout of the Headphone AMP 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
Notes | Pin | Pin | Notes | ||||
---|---|---|---|---|---|---|---|
NC | 1 | AN | PWM | 16 | GS | Gain Selection | |
Standby Mode | STB | 2 | RST | INT | 15 | NC | |
NC | 3 | CS | RX | 14 | NC | ||
NC | 4 | SCK | TX | 13 | NC | ||
NC | 5 | MISO | SCL | 12 | NC | ||
NC | 6 | MOSI | SDA | 11 | NC | ||
Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
Label | Name | Default | Description |
---|---|---|---|
LD1 | PWR | - | Power LED Indicator |
JP1 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
HEADPHONE AMP 2 CLICK ELECTRICAL SPECIFICATIONS
Description | Min | Typ | Max | Unit |
---|---|---|---|---|
Supply Voltage | 3.3 | - | 5 | V |
Load Impedance | - | 4 | - | Ω |
Output Power | - | - | 2.3 | W |
Software Support
We provide a library for the Headphone AMP 2 Click Board™ as well as a demo application (example), developed using MikroE compilers. The demo can run on all the main MikroE development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Library Description
This library contains API for the Headphone AMP 2 Click Board™ driver.
Key functions
-
headphoneamp2_set_device_on
Headphone Amp 2 set device on function. -
headphoneamp2_gain_select
Headphone Amp 2 select gain level function. -
headphoneamp2_change_gain
Headphone Amp 2 change gain function.
Example Description
This library contains API for the Headphone AMP 2 Click Board™ driver. This demo application shows use of the Headphone AMP 2 Click Board™.
void application_task ( void )
{
headphoneamp2_change_gain( &headphoneamp2 );
log_printf( &logger, " The gain level has been changed.rn" );
Delay_ms( 5000 );
}
The full application code, and ready to use projects can be installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.HeadphoneAmp2
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroE compilers.
MIKROSDK
The Headphone AMP 2 Click Board™ is supported with mikroSDK - MikroE Software Development Kit, which needs to be downloaded from the LibStock and installed for the compiler you are using to ensure proper operation of mikroSDK compliant Click board™ demo applications.
Kopfhörer AMP 2 Click Board
Frequently Asked Questions
Ask a Question-
Is the Headphone AMP 2 Click Board™ compatible with my audio system?
The Headphone AMP 2 Click Board™ can be used with any system equipped with the mikroBUS™ socket. It is compatible with a wide range of audio systems, making it a versatile solution for your audio needs.
-
Is it easy to develop software for the Headphone AMP 2 Click Board™?
Yes, the Headphone AMP 2 Click Board™ is supported by a mikroSDK-compliant library that includes functions that simplify software development. This Click board™ comes fully tested and ready to be used on any system equipped with the mikroBUS™ socket.
-
Is the Headphone AMP 2 Click Board™ safe and reliable to use?
Yes, the Headphone AMP 2 Click Board™ is equipped with protection features that ensure reliable and safe operation. It is suitable for portable electronics and audio systems, making it the perfect solution for all your audio needs.
-
What kind of audio performance can I expect from the Headphone AMP 2 Click Board™?
The Headphone AMP 2 Click Board™ offers high-quality audio performance with better efficiency than typical class-AB audio power amplifiers. It features the ability to switch between two gain settings, either 6 or 12dB, through one mikroBUS™ pin. It also comes with pop and click reduction circuitry, and a Standby mode for reduced power consumption.
-
What is the Headphone AMP 2 Click Board™?
The Headphone AMP 2 Click Board™ is a compact and reliable add-on board that provides remote headphone audio-volume control applications. It is equipped with the TS2007FC, a class-D audio power amplifier from STMicroelectronics, that can drive up to 2.3W into a 4Ω load at 5V.