Mikroelektronika d.o.o.
Joystick 3 Click-Platine
Joystick 3 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- Niedriger Stromverbrauch, hohe Qualität, hohe mechanische und elektrische Lebensdauer, Selbstzentrierungsfunktion, 2 Achsen, SPI-Schnittstelle und mehr
- Basierend auf dem 2765 - Mini-2-Achsen-Analog-Thumbstick von Adafruit Industries
- Kann für zahlreiche Anwendungen als Mensch-Maschine-Schnittstellengerät (HMI), Robotik und andere Steuerschnittstellen verwendet werden
- mikroBUS: SPI-Schnittstelle
Erleben Sie präzise Richtungskontrolle mit Joystick 3 Click Board™
Erweitern Sie Ihren Bedarf an analogen Richtungseingaben mit dem kompakten und hochwertigen Joystick 3 Click Board™. Diese Zusatzplatine verfügt über den 2765 Mini-2-Achsen-Analogausgangs-Thumbstick von Adafruit Industries und bietet Ihnen einen „selbstzentrierenden“ Analog-Joystick mit einer schwarzen Kippkappe ähnlich den PSP-Joysticks.
Präzise Steuerung mit 10kΩ Potentiometern
Das Joystick 3 Click Board™ ist mit zwei 10-kΩ-Potentiometern ausgestattet, eines für Aufwärts-/Abwärtsbewegungen und eines für Links-/Rechtsbewegungen. Diese Potentiometer gewährleisten eine genaue und präzise Steuerung, wodurch sich dieses Click Board™ perfekt für verschiedene Anwendungen wie Mensch-Maschine-Schnittstellengeräte (HMI), Robotik und andere Steuerschnittstellen eignet.
Nahtlose Verbindung mit mikroBUS™
Das Joystick 3 Click Board™ lässt sich über den 12-Bit-A/D-Wandler MCP3204 nahtlos mit mikroBUS™ verbinden. Dies gewährleistet eine schnelle und effiziente Datenübertragung und ermöglicht Ihnen eine reibungslose und reaktionsschnelle Steuerung.
Vereinfachte Softwareentwicklung mit mikroSDK-kompatibler Bibliothek
Die Entwicklung von Software für das Joystick 3 Click Board™ ist mit der mikroSDK-kompatiblen Bibliothek ein Kinderspiel. Diese Bibliothek enthält Funktionen, die die Softwareentwicklung vereinfachen und Ihnen den Einstieg in Ihr Projekt erleichtern.
Gebrauchsfertiges, gründlich getestetes Produkt
Das Joystick 3 Click Board™ ist ein gründlich getestetes Produkt, das garantiert, dass es für den Einsatz auf einem System mit der MikroBUS™-Buchse bereit ist. Dies bedeutet, dass Sie das Click Board™ sofort nach dem Auspacken verwenden können, ohne dass zusätzliche Einrichtung oder Tests erforderlich sind.
Rüsten Sie Ihre Steuerschnittstellen und HMI-Geräte noch heute mit dem Joystick 3 Click Board™ auf!
How Does The Joystick 3 Click Board™ Work?
The Joystick 3 Click Board™ is based on the 2765, a high-quality mini 2-axis analogue-type thumbstick from Adafruit Industries. This type of joystick has a self-centring feature that allows it to centre itself the moment when you release the joystick. It also contains a comfortable cup-type black knob/cap, which gives the feel of a thumbstick, making it very similar to the 'analogue' joysticks on PSP joysticks, suitable for numerous applications as a human-machine interface.
The Joystick 3 Click Board™ comprises two 10kΩ potentiometers, one for up/down and another for left/right direction, used as dual adjustable voltage dividers providing 2-axis analogue input in a control stick form. With the joystick fully assembled and functioning, the voltage will follow the motion of the thumbstick as it is moved around.
The measurements of the potentiometer resistance change are needed to read the joystick's physical position. That's why the MCP3204, a 12-bit A/D converter from Microchip, connects the joystick with mikroBUS™ using a simple serial interface compatible with the SPI protocol to determine the value of the joystick's X and Y. As the MCP3204 has a resolution of 12 bits, the values on each analogue channel (axis) can vary from 0 to 4095. So, if the stick is moved on the X axis from one end to the other, the X values will change from 0 to 4095, and a similar thing happens when moved along the Y axis. The value of the joystick staying in its centre position is around 2048. Also, the MCP3204 is capable of conversion rates of up to 100ksps.
The Joystick 3 Click Board™ can be operated only with a 3.3V logic voltage level. The board must perform appropriate logic voltage level conversion before using MCUs with different logic levels. However, the Click board™ comes equipped with a library containing functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Pushbutton/Switches |
| Applications | The Joystick 3 Click Board™ be used for numerous applications as a human-machine interface device (HMI), robotics, and other control interfaces |
| On-board modules | 2765 - mini 2-axis analogue-type thumbstick from Adafruit Industries |
| Key Features | Low power consumption, high quality, high mechanical and electrical durability, self-centring feature, 2-axis, SPI interface, and more |
| Interface | SPI |
| Compatibility | mikroBUS |
| Click board size | M (42.9 x 25.4 mm) |
| Input Voltage | 3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the Joystick 3 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| NC | 1 | AN | PWM | 16 | NC | ||
| NC | 2 | RST | INT | 15 | NC | ||
| SPI Chip Select | CS | 3 | CS | RX | 14 | NC | |
| SPI Clock | SCK | 4 | SCK | TX | 13 | NC | |
| SPI Data OUT | SDO | 5 | MISO | SCL | 12 | NC | |
| SPI Data IN | SDI | 6 | MOSI | SDA | 11 | NC | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | NC | |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
JOYSTICK 3 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage | - | 3.3 | - | V |
| 2765 Potentiometer Resistance | - | 10 | - | kΩ |
| ADC Resolution | - | 12 | - | bits |
| Operating Temperature Range | 0 | +25 | +80 | °C |
Software Support
We provide a library for the Joystick 3 Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains API for the Joystick 3 Click Board™ driver.
Key functions
-
joystick3_read_raw_adcThis function reads the raw ADC for X and Y axis by using SPI serial interface. -
joystick3_get_angleThis function calculates and returns the joystick angle in degrees from raw ADC values for X and Y axis. -
joystick3_get_positionThis function calculates and returns the joystick position flag from raw ADC values for X and Y axis.
Example Description
This example demonstrates the use of the Joystick 3 Click Board™ by reading and displaying the raw ADC for the X and Y axis, as well as the joystick angle and position calculated from those ADC readings.
void application_task ( void )
{
uint16_t raw_x, raw_y;
if ( JOYSTICK3_OK == joystick3_read_raw_adc ( &joystick3, &raw_x, &raw_y ) )
{
log_printf ( &logger, " RAW X: %urn RAW Y: %urn", raw_x, raw_y );
log_printf ( &logger, " Joystick angle: %.1f degreesrn", joystick3_get_angle ( raw_x, raw_y ) );
log_printf ( &logger, " Joystick position: " );
switch ( joystick3_get_position ( raw_x, raw_y ) )
{
case JOYSTICK3_POSITION_NEUTRAL:
{
log_printf ( &logger, "NEUTRAL" );
break;
}
case JOYSTICK3_POSITION_UP:
{
log_printf ( &logger, "UP" );
break;
}
case JOYSTICK3_POSITION_UPPER_RIGHT:
{
log_printf ( &logger, "UPPER-RIGHT" );
break;
}
case JOYSTICK3_POSITION_RIGHT:
{
log_printf ( &logger, "RIGHT" );
break;
}
case JOYSTICK3_POSITION_LOWER_RIGHT:
{
log_printf ( &logger, "LOWER-RIGHT" );
break;
}
case JOYSTICK3_POSITION_DOWN:
{
log_printf ( &logger, "DOWN" );
break;
}
case JOYSTICK3_POSITION_LOWER_LEFT:
{
log_printf ( &logger, "LOWER-LEFT" );
break;
}
case JOYSTICK3_POSITION_LEFT:
{
log_printf ( &logger, "LEFT" );
break;
}
case JOYSTICK3_POSITION_UPPER_LEFT:
{
log_printf ( &logger, "UPPER-LEFT" );
break;
}
default:
{
log_printf ( &logger, "UNKNOWN" );
break;
}
}
log_printf ( &logger, "rnn" );
Delay_ms ( 100 );
}
}
The complete application code and ready-to-use projects can be installed directly from NECTO Studio. The package Manager (recommended) is downloaded from our LibStock™ or found on the MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Joystick3
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click, or RS232 Click to connect to your PC for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The Joystick 3 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Joystick 3 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.