Mikroelektronika d.o.o.
Schrittmotor 12 Click-Platine
Schrittmotor 12 Click-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features:
- Niedriger Stromverbrauch, kann einen bipolaren Schrittmotor steuern, PWM-gesteuerter Konstantstromantrieb, betriebsbereit in den Schrittauflösungen Voll-, Halb-, Viertel-, 1/8-, 1/16- und 1/32, integrierter gemischter Abklingmodus, Anomalieerkennungsfunktionen und mehr
- Basierend auf dem TB67S549FTG - zweiphasiger bipolarer Schrittmotortreiber mit widerstandsloser Strommessung dank Advanced Current Detect System (ACDS) von Toshiba Semiconductor
- Kann für kleine Schrittmotoren in einer Vielzahl von Anwendungen wie Büroautomatisierung, gewerblichen und industriellen Geräten verwendet werden
- mikroBUS: I2C- und GPIO-Schnittstellen
Das Stepper 12 Click Board™ ist eine kompakte Zusatzplatine, die einen bipolaren Schrittmotortreiber enthält. Diese Platine verfügt über den TB67S549FTG, einen zweiphasigen bipolaren Schrittmotortreiber von Toshiba Semiconductor. Es unterstützt einen PWM-Konstantstrom-Steuerantrieb ohne Strommesswiderstand zur Motorstromerkennung dank der integrierten Funktion des Advanced Current Detect System (ACDS) und ermöglicht eine Auflösung von Vollschritten bis 1/32 Schritten für weniger Motorgeräusche und eine sanftere Steuerung. Es verfügt über einen großen Betriebsspannungsbereich von 4,5 V bis 34 V mit einer Ausgangsstromkapazität von maximal 1,5 A und mehreren Anomalieerkennungsanzeigen. Dieses Click Board™ ist die perfekte Lösung für kleine Schrittmotoren in verschiedenen Anwendungen wie Büroautomatisierung und gewerblichen und industriellen Geräten.
Das Stepper 12 Click Board™ wird von einer mikroSDK-kompatiblen Bibliothek unterstützt, die Funktionen enthält, die die Softwareentwicklung vereinfachen. Dieses Click Board™ ist ein gründlich getestetes Produkt und kann auf einem System verwendet werden, das mit der mikroBUS™-Buchse ausgestattet ist.
How Does The Stepper 12 Click Board™ Work?
The Stepper 12 Click Board™ as its foundation uses the TB67S549FTG, a two-phase bipolar stepping motor driver designed to control one bipolar stepping motor with resistorless current sensing owing to the built-in function of Advanced Current Detect System (ACDS) from Toshiba Semiconductor. The TB67S549FTG incorporates low on-resistance DMOS FETs, which can deliver a 1.5A maximum current with a motor output voltage rating of 40V and integrated protection mechanisms such as over-current, over-temperature, and under-voltage lockout for error detection (LO LED indicator). It supports full-step to 1/32 steps resolution for less motor noise and smoother control, with Advanced Dynamic Mixed Decay (ADMD) built-in function that helps stabilize the current waveforms.
Thanks to the many steps that TB67S549FTG supports, motor noise can be significantly reduced with smoother operation and more precise control. It is suited to a wide range of applications such as office automation, commercial, and industrial equipment using stepping motors supporting an operational temperature range covering 40°C to +85°C. The current value in the PWM constant-current mode is set by the reference voltage value obtained by the MCP1501, a high-precision voltage regulator. Also, the current threshold point of the TB67S549FTG, alongside MCP1501, can be set manually using an onboard trimmer labelled VR.
In addition to the I2C communication, several GPIO pins connected to the mikroBUS™ socket pins are also used to forward the information to the MCU associated with the PCA9555A port expander. The PCA9555A also allows choosing the least significant bit (LSB) of its I2C slave address by positioning SMD jumpers labelled as ADDR SEL to an appropriate position marked as 0 and 1, alongside its interrupt feature routed to the INT pin of the mikroBUS™ socket.
The CLK clock signal, routed to the PWM pin of the mikroBUS™ socket, shifts the current step and electrical angle of the motor with its every up-edge. In contrast, the Enable pin, labelled as EN and routed to the CS pin of the mikroBUS™ socket, controls the state of the output A and B stepping motor drive channels. The normal constant current control is started by turning the motor drive ON (HIGH level), while by setting the motor drive OFF, the outputs are turned high impedance because the MOSFETs are set to OFF (LOW level). Besides, all circuits can be stopped using the Sleep function and thus enable power saving mode. A simple DIR pin routed to the AN pin on the mikroBUS™ socket allows MCU to manage the direction of the stepper motor (clockwise or counterclockwise). In contrast, the RST pin of the mikroBUS™ socket initializes an electrical angle in the internal counter to set an initial position. Achieving an initial position is indicated via onboard orange LED labelled as MO.
A specific addition to the Stepper 12 Click Board™ is a multifunctional switch that allows the user, by selecting a particular switch, to set appropriate features such as:
- 1 – Sleep Mode Activation
- 2 , 3 – Motor Torque Setting
- 5 – Decay Control
- 6 , 7 , 8 – Step Resolution Setting
In addition to this physical way of setting these functions, the user can select them digitally via the I2C interface.
The Stepper 12 Click Board™ supports an external power supply for the TB67S549FTG, which can be connected to the input terminal labelled as VM and should be within the range of 4.5V to 34V, while the stepper motor coils can be connected to the terminals labelled as B+, B-, A-, and A+.
The Stepper 12 Click Board™ can operate with both 3.3V and 5V logic voltage levels selected via the VCC SEL jumper. This way, it is allowed for both 3.3V and 5V capable MCUs to use communication lines properly. However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development.
SPECIFICATIONS
| Type | Stepper |
| Applications | Can be used for small stepping motors in a wide range of applications such as office automation, commercial and industrial equipment |
| On-board modules | TB67S549FTG - two-phase bipolar stepping motor driver with resistorless current sensing thanks to Advanced Current Detect System (ACDS) from Toshiba Semiconductor |
| Key Features | Low power consumption, capable of controlling one bipolar stepping motor, PWM-controlled constant-current drive, operational in full, half, quarter, 1/8, 1/16, and 1/32 step resolutions, built-in a mixed decay mode, anomaly detection functions, and more |
| Interface | GPIO, I2C |
| Compatibility | mikroBUS |
| Click board size | L (57.15 x 25.4 mm) |
| Input Voltage | 3.3V,5V,External |
PINOUT DIAGRAM
This table shows how the pinout of the Stepper 12 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes | Pin |  |
Pin | Notes | |||
|---|---|---|---|---|---|---|---|
| Rotation Direction | DIR | 1 | AN | PWM | 16 | CLK | Step Clock |
| Electrical Angle Intilizing | RST | 2 | RST | INT | 15 | INT | Interrupt |
| Enable | EN | 3 | CS | RX | 14 | NC | |
| NC | 4 | SCK | TX | 13 | NC | ||
| NC | 5 | MISO | SCL | 12 | SCL | I2C Clock | |
| NC | 6 | MOSI | SDA | 11 | SDA | I2C Data | |
| Power Supply | 3.3V | 7 | 3.3V | 5V | 10 | 5V | Power Supply |
| Ground | GND | 8 | GND | GND | 9 | GND | Ground |
ONBOARD SETTINGS AND INDICATORS
| Label | Name | Default | Description |
|---|---|---|---|
| LD1 | PWR | - | Power LED Indicator |
| LD2 | L0 | - | Anomaly Detection LED Indicator |
| LD3 | M0 | - | Initial Position LED Indicator |
| JP1-JP3 | ADDR SEL | Left | I2C Address Selection 0/1: Left position 0, Right position 1 |
| JP4 | VCC SEL | Left | Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V |
| SW1 | POS 1 | Middle | Sleep Mode Activation Switch |
| SW1 | POS 2-3 | Middle | Motor Torque Setting Switch |
| SW1 | POS 5 | Middle | Mixed Decay Control Switch |
| SW1 | POS 6-7-8 | Middle | Step Resolution Setting Switch |
| VR | VR | - | Current Threshold Trimmerh |
STEPPER 12 CLICK ELECTRICAL SPECIFICATIONS
| Description | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Supply Voltage VCC | 3.3 | - | 5 | V |
| External Supply Voltage VM | 4.5 | 24 | 34 | V |
| Maximum Output Voltage | - | - | 40 | V |
| Maximum Output Current | - | - | 1.5 | A |
| Maximum Step Clock Frequency | - | - | 250 | kHz |
| Operating Temperature Range | -20 | +25 | +85 | °C |
Software Support
We provide a library for the Stepper 12 Click Board™ and a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from NECTO Studio The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Library Description
This library contains API for the Stepper 12 Click Board™ driver.
Key functions
-
stepper12_set_directionThis function sets the motor direction by setting the DIR pin logic state. -
stepper12_drive_motorThis function drives the motor for the specific number of steps at the selected speed. -
stepper12_set_step_modeThis function sets the step mode resolution settings.
Example Description
This example demonstrates the Stepper 12 Click Board™ by driving the motor in both directions for a desired number of steps.
void application_task ( void )
{
log_printf ( &logger, " Move 200 full steps clockwise rnn" );
stepper12_set_step_mode ( &stepper12, STEPPER12_MODE_FULL_STEP );
stepper12_set_direction ( &stepper12, STEPPER12_DIR_CW );
stepper12_drive_motor ( &stepper12, 200, STEPPER12_SPEED_FAST );
Delay_ms ( 2000 );
log_printf ( &logger, " Move 400 quarter steps counter-clockwise rnn" );
stepper12_set_step_mode ( &stepper12, STEPPER12_MODE_QUARTER_STEP );
stepper12_set_direction ( &stepper12, STEPPER12_DIR_CCW );
stepper12_drive_motor ( &stepper12, 400, STEPPER12_SPEED_FAST );
Delay_ms ( 2000 );
}
The complete application code and ready-to-use projects can be installed directly from NECTO Studio, The package Manager (recommended), downloaded from our LibStock™ or found on the MikroE Github account.
Other MikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.Stepper12
Additional Notes and Information
Depending on the development board you are using, you may need USB UART Click Board™, USB UART 2 Click or RS232 Click to connect to your PC for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.
MIKROSDK
The Stepper 12 Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
Schrittmotor 12 Click-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.