Mikroelektronika d.o.o.
Port-Expander-Platine
Port-Expander-Platine
Verfügbarkeit für Abholungen konnte nicht geladen werden
Mit der Port Expander-Karte können Sie die E/A-Ports ganz einfach über eine standardmäßige serielle Schnittstelle erweitern. Die Karte verfügt über einen 16-Bit-E/A-Expander MCP23S17 mit serieller Schnittstelle. Der SPI-Takt hat eine Geschwindigkeit von bis zu 10 MHz, wodurch sie sich hervorragend für Anwendungen mit höherem Datendurchsatz eignet. Die Interrupt-on-Change-Funktion kann als 8 separate externe Interrupts betrachtet werden, die demselben Interrupt-Vektor zugeordnet sind. Die Port Expander-Karte verfügt über Jumper, mit denen der Benutzer den Port-Expander bestimmen kann.
The Expander Board includes a 16-bit I/O expander MCP23S17 with SPI clock speeds up to 10 MHz for higher throughput applications. Three HARDWARE ADDRESS SELECTION jumpers allow you to configure board's address and connect up to eight devices on the bus. Controller also supports interrupt-on-change feature. Port expander board is convenient for adding 16 GPIO pins to your device.
IC/Module: MCP23S17
The MCP23S17 is a 16-bit input/output expander with SPI clock speeds up to 10 MHz. It comprises of multiple 8-bit configuration registers for input, output and polarity selection. It uses a SPI serial interface to communicate with the microcontroller provided on the development system. The 16-bit I/O port functionality consists of two 8-bit ports (PORTA and PORTB). MCP23S17 chip is used to convert data received from 16 additional pins and to transmit it to the microcontroller via two pins. Instead of 16 lines, the additional board is connected to the microcontroller through only four lines, known as data receive/transmit lines and two control lines.
SMD Jumpers
The Port Expander Board features three jumpers: J0, J1 and J2. Designed to control the port expanders hardware address, these jumpers are placed in position marked 1, the address is 1. When placed in position marked 0, the address is 0. By default, all the jumpers are placed in position marked 0.
Port-Expander-Platine
Frequently Asked Questions
Have a Question?
Be the first to ask a question about this.