Tag-Connect, LLC
Tag Connect TC2030-PKT-Kabel
Tag Connect TC2030-PKT-Kabel
SKU: TC2030-PKT
Verfügbarkeit für Abholungen konnte nicht geladen werden
Key Features
Overview
Downloads
Why Engineers Choose the Tag Connect TC2030-PKT-Kabel
Space-Critical Designs
Development Efficiency
Cost Reduction
Das Programmier-/Debugging-Kabel Tag-Connect TC2030-PKT ist in erster Linie für den Einsatz in Entwicklungsumgebungen vorgesehen, eignet sich aber auch ideal für die Produktionsprogrammierung. Die federbelasteten Kontaktstifte werden durch vier Kunststoffbeine fest an ihrem Platz gehalten, von denen jedes sicher in sein Positionierungsloch einrastet.
Der Tag-Connect TC2030-PKT ist ideal, wenn Sie über einen längeren Zeitraum eine Verbindung zur Leiterplatte aufrechterhalten müssen, beispielsweise bei Test- oder Entwicklungsarbeiten.
| General Information | |
|---|---|
Part Number (SKU) |
TC2030-PKT
|
Manufacturer |
|
| Physical and Mechanical | |
Weight |
0.1 kg
|
| Other | |
EAN |
5055383665280
|
Questions and Answers
-
Does the TC2030-PKT Require External Power During Programming?
Tag-Connect does not specify target power for this cable. The PICkit can supply limited target power on its VDD pin (see Microchip's PICkit user guide for the current limit); otherwise power the target externally.
External power can also be used during debugging if your application needs it.
-
What Microcontroller Families Are Supported?
The TC2030-PKT is for Microchip PIC, dsPIC and PIC32 devices programmed over the standard 6-pin ICSP connection, which spans 8-bit, 16-bit and 32-bit families.
-
Can I Use the TC2030-PKT for Debugging as Well as Programming?
Yes. Tag-Connect describes the TC2030-PKT as a programming and debugging cable for the PICkit.
Features such as breakpoints, single-stepping and variable monitoring come from the PICkit debugger and your software, not from the cable.
-
How Do I Ensure Proper Pin 1 Orientation When Connecting?
The footprint's alignment holes are asymmetric (one to the left of the pads, two to the right), so the plug only fits one way round.
Pin 1 marking on the silkscreen depends on your layout, so we recommend adding it.
-
Are There Alternatives for Other Programmer Brands Besides PICkit?
Yes. Tag-Connect makes cables for many programmers; its debugger cable-selection pages list the cable for each one.
Programmer type Cable Microchip PICkit TC2030-PKT ARM Cortex debuggers TC2030-CTX series Generic use with a ribbon connector TC2030-IDC -
How Many Programming Cycles Can the TC2030-PKT Handle?
Tag-Connect's cycle testing shows the spring pins last well over 100,000 operations; the ribbon cable usually wears out first. That suits both development and high-volume production programming.
-
What's the Difference Between TC2030-PKT and TC2030-PKT-NL Versions?
The TC2030-PKT has four plastic legs that clip into PCB holes; the TC2030-PKT-NL has no legs and a smaller footprint, and is held by hand, which suits production.
TC2030-PKT TC2030-PKT-NL Retention Four legs clip into holes Held by hand Footprint Standard Even smaller Suited to Debugging Production programming -
What PCB Design Considerations Are Required for the TC2030 Footprint?
The footprint needs six contact pads, three alignment holes and, for the legged cable, four leg holes.
- no solder paste on the contact pads
- 0.020 in clearance around the pads
- the paste mask layer set up correctly in your CAD software
-
Can the TC2030 Footprint Be Placed on the Bottom of the PCB?
Yes. The TC2030 footprint can go on either side of the PCB. Bottom placement helps in space-constrained designs with dense top-side components.
No questions match your search.