Zu Produktinformationen springen
1 von 4

Tag-Connect, LLC

Tag-Connect TC2030-FTDI-TTL-232RG USB to TC2030 Serial Cable (VREG and VSW Versions)

Tag-Connect TC2030-FTDI-TTL-232RG USB to TC2030 Serial Cable (VREG and VSW Versions)

FTDI TTL-232RG USB serial cable on a TC2030 connector: 1.8 V, 3.3 V or 5 V versions

SKU: TC2030-FTDI-TTL-232RG-VREG1V8

€124,95 EUR exc tax

Choose Your Options

Select one of each below. The price updates as you choose.

Legs
FTDI Cable

Check and Add to Cart

Confirm the price and stock for your selection, set the quantity, then press Add to Cart.

Normaler Preis
€124,95 EUR exc tax
Normaler Preis Verkaufspreis
€124,95 EUR exc tax
Sale Ausverkauft
Versand wird beim Checkout berechnet
If no stock is shown above, order now and we'll dispatch within 10 working days.

Zahlungsmethoden

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Banküberweisung
Vollständige Details anzeigen

Key Features

FTDI TTL-232RG cable
1.8 V logic option
3.3 V and 5 V options
Up to 450 mA on VCC
3 Mbps
No header on the PCB
Legged or no-legs

Overview

These are FTDI TTL-232RG USB-to-serial converter cables fitted with a 6-pin TC2030 Tag-Connector. The cable plugs straight onto the TC2030 footprint on your board, so no mating connector is fitted to the PCB, saving cost and space.

Pick the version that matches your target's logic and supply. The VREG1V8 version has 1.8 V UART signals and supplies 1.8 V at up to 100 mA. VREG3V3 has 3.3 V signals and supplies 3.3 V at up to 250 mA. VSW3V3 has 3.3 V signals with 50 mA available on VCC, and VSW5V has 5 V signals with up to 450 mA on VCC. All run at up to 3 Mbps and are nominally 1.8 m (5.9 ft) long.

Legged versions clip into the board for hands-free use; no-legs (NL) versions use a smaller footprint. For 12 Mbaud UART operation on Hi-Speed USB, see the TC2030-CIC-FT232H Chip-in-Connector.

Matches Your Logic

1.8 V, 3.3 V or 5 V signal versions.

Console on a Footprint

Serial access with no connector fitted.

FTDI's Own Cable

FTDI's TTL-232RG converter cable with a Tag-Connector fitted.

Specifications

FTDI cable VCC VCC maximum current UART signal level Data rate
TTL-232RG-VREG1V8 1.8 V 100 mA 1.8 V 3 Mbps
TTL-232RG-VREG3V3 3.3 V 250 mA 3.3 V 3 Mbps
TTL-232RG-VSW3V3 3.3 V 50 mA 3.3 V 3 Mbps
TTL-232RG-VSW5V 5 V 450 mA 5 V 3 Mbps

Cable length nominally 1.8 m (5.9 ft).

Key Features from the FTDI Datasheet

  • FTDI FT232RQ USB to UART converter sealed in the USB plug; the whole USB protocol is handled in the cable, so no USB firmware is needed on your side
  • Data rates from 300 baud to 3 Mbaud
  • 128-byte receive buffer and 256-byte transmit buffer (FT232R)
  • Internal EEPROM with a user-writeable area, programmable in circuit over USB with FTDI's free FT_PROG utility
  • FTDIChip-ID: a unique number is programmed into each cable at manufacture and cannot be changed, usable for licence or dongle checks
  • Each UART signal can be inverted individually by an EEPROM setting, for example CTS# to CTS
  • Low supply current: 15 mA operating, about 70 µA in USB suspend (FT232RQ figures). Your board must draw less than 2.5 mA from VCC during USB suspend to stay USB compliant
  • Input switching threshold 1.0 V to 1.5 V (1.2 V typical) on all versions
  • USB 2.0 Full Speed; UHCI, OHCI and EHCI host controller compatible
  • FCC, CE, UKCA and RoHS compliant
  • -40 °C to +85 °C operating temperature range
  • VCP and D2XX drivers for Windows, Linux and macOS, with D2XX support on Android

FTDI's datasheets for the cable and for the converter chip are in the Downloads section on this page.

Which FTDI Tag-Connect Cable?

Cable VCC on pin 1 UART signal level Data rate Pin 2
TC2030-FTDI-TTL-232RG, VREG and VSW (this cable) Supplied by the cable: 1.8 V, 3.3 V or 5 V, by version Matches the version: 1.8 V, 3.3 V or 5 V 3 Mbps CTS
TC2030-FTDI-TTL-232RG-VIP Input: your board supplies 1.8 V to 5.25 V Set by your board's VCC 3 Mbps CTS
TC2030-FTDI-C232HD-DTR Supplied by the cable: 3.3 V or 5 V 3.3 V 12 Mbps DTR
TC2030-CIC-FT232H Supplied: 3.3 V or 5 V 3.3 V outputs; inputs 5 V tolerant UART up to 12 Mbaud CTS or DTR, by version

Versions

Part number Legs
TC2030-FTDI-TTL-232RG-VREG1V8 Legged
TC2030-FTDI-TTL-232RG-VREG3V3 Legged
TC2030-FTDI-TTL-232RG-VSW3V3 Legged
TC2030-FTDI-TTL-232RG-VSW5V Legged
TC2030-NL-FTDI-TTL-232RG-VREG1V8 No legs
TC2030-NL-FTDI-TTL-232RG-VREG3V3 No legs
TC2030-NL-FTDI-TTL-232RG-VSW3V3 No legs
TC2030-NL-FTDI-TTL-232RG-VSW5V No legs

Pin Connections

TC2030 pin FTDI signal (wire colour) Direction
1 VCC (red) Power output
2 CTS / TMS (brown) Input
3 RXD / TDI (yellow) Input
4 TXD / TCLK (orange) Output
5 GND (black) Ground
6 RTS / TDO (green) Output

Which cable fits your debugger? See our Tag-Connect cable guide.

Ordering information
Part number (SKU)TC2030-FTDI-TTL-232RG-VREG1V8
ManufacturerTag-Connect, LLC
EAN5055383607822
Warranty6 months
Shipping weight91 g
  • 1 × TC2030-FTDI-TTL-232RG Cable (Version as Ordered)
Engineer Q&A

Questions and Answers

4 questions

Can't find your answer? Ask our engineers.

Ask a Question

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.