
Overview
The Relay Adapter disconnects Flasher signals from the target by relay contacts, switching every line including GND and VTSUPPLY. It is built for production setups with automated test equipment, where several test and programming devices share the same nail-bed lines. It uses instrumentation grade reed relays rated at 1 A contact switch current.
The SEGGER Relay Adapter (part number 8.06.41) disconnects Flasher signals from the target by relay contacts, switching every line including GND and VTSUPPLY. It is built for production setups with automated test equipment (ATE), where several test and programming devices share the same nail-bed lines. It uses instrumentation grade reed relays rated at 1 A contact switch current, with initial contact resistance below 150 mOhms and insulation resistance above 10^12 Ohms.
Full Signal Disconnection on Shared Nail-Bed Lines
On an ATE fixture, the programmer and other test devices can share the same nail-bed lines. The Relay Adapter sits between the Flasher and those lines and opens them by relay contacts, so the Flasher can be taken off the target completely. Every signal is switched, GND and VTSUPPLY included, and one additional switch contact is provided for customer use.
Relays Controlled by VTSUPPLY
All relays are controlled by VTSUPPLY. The adapter draws less than 100 mA, taken from the Flasher's target supply rail, and SEGGER lists no separate power input for it. The adapter plugs into the standard 20-pin 0.1" connector shared by Flasher and J-Link; pin assignments are in our SEGGER J-Link 20-pin connector pinout guide.
Compatible SEGGER Programmers and Probes
SEGGER lists the adapter for Flasher PRO, Flasher PRO XL, Flasher Compact and Flasher Portable PLUS, and for J-Link PRO PoE, J-Link PRO, J-Link ULTRA+, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.
Specifications
| Part number | 8.06.41 |
|---|---|
| Relay type | Instrumentation grade reed relays |
| Contact switch current | 1 A |
| Initial contact resistance | < 150 mOhms |
| Insulation resistance | > 10^12 Ohms |
| Switched lines | All signals, including GND and VTSUPPLY, plus one additional contact for customer use |
| Relay control | VTSUPPLY |
| Current consumption | < 100 mA, from the Flasher target supply rail |
| Connector | 20-pin, 0.1" (2.54mm) |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, Portable PLUS |
| Compatible J-Link models | J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
What's Included
SEGGER publishes no box contents list for this adapter, so we state only the Relay Adapter itself.
Limitations
- Relay control depends on VTSUPPLY, so plan the programmer's target supply setting into your fixture sequence.
- The relays separate programmer and target only while open. For isolation while programming, SEGGER offers the JTAG Isolator.
- SEGGER publishes no dimensions or switching time for it.
Relay Adapter Compared with Related Adapters
| Adapter | What it does | Typical use | Price ex VAT |
|---|---|---|---|
| Relay Adapter (this product) | Disconnects all programmer signals, GND and VTSUPPLY included, by reed relays | ATE and nail-bed fixtures | €300,95 |
| J-Link JTAG Isolator | Galvanic isolation between probe and target | Tools and application without a common ground | €282,95 |
| Test Farm Power Adapter | Remote control of the test device's power supply | Power saving and automated reboots in test farms | €137,95 |
| Measurement Patch Adapter | Test points for all debug signals | Probing debug signals on the bench | €162,95 |
Order the Relay Adapter for €300,95 ex VAT. Send us your fixture details if you want a second opinion on the wiring, or ask for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.41 |
| Relay type | Instrumentation grade reed relays |
| Contact switch current | 1 A |
| Initial contact resistance | < 150 mOhms |
| Insulation resistance | > 10^12 Ohms |
| Switched lines | All signals, including GND and VTSUPPLY, plus one additional contact for customer use |
| Relay control | VTSUPPLY |
| Host and Target Interface | |
| Connector | 20-pin, 0.1" (2.54mm) |
| Power | |
| Current consumption | < 100 mA, from the Flasher target supply rail |
| Software and Compatibility | |
| Compatible Flasher models | Flasher PRO, PRO XL, Compact, Portable PLUS |
| Compatible J-Link models | J-Link PRO PoE, PRO, ULTRA+, WiFi, PLUS Classic, PLUS Compact, BASE Classic, BASE Compact |
| Ordering information | |
| Part number (SKU) | 8.06.41 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383622825 |
| Warranty | 12 Monate |
| Shipping weight | 0.05 kg |
-
1 ×
SEGGER Relaisadapter
Contact us to confirm the full contents of the box.
Questions and Answers
-
Does the Relay Adapter Need Its Own Power Supply?
SEGGER lists no separate supply. The adapter draws less than 100 mA from the Flasher's target supply rail, and all relays are controlled by VTSUPPLY.
-
Is the Ground Line Switched Too?
Yes. SEGGER switches all signals, including GND and VTSUPPLY, so the Flasher signals can be completely disconnected from the target.
-
What Is the Spare Contact For?
SEGGER provides one additional switch contact for customer use and leaves its function to you. Check SEGGER's schematic for its pin position before wiring it into a fixture.
No questions match your search.