
Overview
The Microchip 2-Wire JTAG TDI Adapter connects a J-Link debug probe to target hardware built on Microchip IS208x series MCUs. It adapts the standard J-Link 20-pin 0.1" connector to the Microchip 6-pin single row 0.1" connector and carries the 2-wire JTAG TDI interface. SEGGER makes the schematic available on request.
The SEGGER Microchip 2-Wire JTAG TDI Adapter (part number 8.06.23) connects a J-Link debug probe to target hardware built on Microchip IS208x series MCUs. It adapts the standard J-Link 20-pin 0.1" connector to the Microchip 6-pin single row 0.1" connector and carries the 2-wire JTAG TDI interface.
2-Wire JTAG Connection for Microchip IS208x MCUs
J-Link talks to the IS2083 over the Microchip 2-wire JTAG protocol: one bidirectional data line and a clock supplied by J-Link, plus RESET, VTref and GND. SEGGER's IS2083 getting started guide recommends this adapter for the J301 header on the BM8x evaluation board and maps the five signals to J-Link pins 15 (RESET), 1 (VTref), 4 (GND), 5 (TDI) and 9 (TCK). Pin assignments for the probe side are in our SEGGER J-Link 20-pin connector pinout guide.
Compatible J-Link Models and Software
SEGGER lists the adapter as suitable for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS (Classic and Compact) and J-Link BASE (Classic and Compact). SEGGER states that the IS2083 is currently supported in J-Link Commander and in Keil uVision for PK51, which needs Keil C51/PK51 tools V9.59 or later.
Specifications
| Part number | 8.06.23 |
|---|---|
| Probe side | J-Link 20-pin, 0.1" (2.54mm) |
| Target side | Microchip 6-pin single row, 0.1" |
| Target interface | Microchip 2-wire JTAG (TDI) |
| Target pinout | 1 #RESET, 2 VDD, 3 GND, 4 TDI, 5 TCK, 6 NC (populated, not connected) |
| Target devices | Microchip IS208x series MCUs |
| Schematic | Available from SEGGER on request |
What's Included
- 1 x 20-pin to 6-pin adapter
Limitations
- Made for Microchip IS208x series MCUs only. For PIC32 targets, see the Microchip LVP Adapter for PIC32.
- SEGGER currently lists IS2083 support in J-Link Commander and Keil uVision for PK51 only.
- SEGGER's suitable products list names J-Link models only; no Flasher and no J-Link EDU models are listed.
Microchip 2-Wire JTAG TDI Adapter Compared with Related Adapters
| Adapter | Target | Target connector | Price ex VAT |
|---|---|---|---|
| Microchip 2-Wire JTAG TDI Adapter (this product) | Microchip IS208x, 2-wire JTAG | 6-pin single row 0.1" | €82,95 |
| Microchip LVP Adapter for PIC32 | Microchip PIC32 | See product page | €73,95 |
| SiLabs C2 Adapter | Silicon Labs C2 debug interface | 10-pin 0.1" | €93,95 |
| RX FINE Adapter | Renesas RX, FINE interface | 14-pin 0.1" Renesas | €80,95 |
Order the Microchip 2-Wire JTAG TDI Adapter for €82,95 ex VAT. Check that your device is an IS208x series part, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 8.06.23 |
| Probe side | J-Link 20-pin, 0.1" (2.54mm) |
| Schematic | Available from SEGGER on request |
| Host and Target Interface | |
| Target side | Microchip 6-pin single row, 0.1" |
| Target interface | Microchip 2-wire JTAG (TDI) |
| Target pinout | 1 #RESET, 2 VDD, 3 GND, 4 TDI, 5 TCK, 6 NC (populated, not connected) |
| Target devices | Microchip IS208x series MCUs |
| Ordering information | |
| Part number (SKU) | 8.06.23 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383699766 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
- 1 ×20-pin to 6-pin adapter
- 1 ×0.1" 6-pin ribbon cable (21 cm)
Questions and Answers
-
Which Microchip Devices Does This Adapter Support?
Microchip IS208x series MCUs. SEGGER's getting started guide covers the IS2083 on the BM8x evaluation board, connected through header J301.
-
Which J-Link Pins Does the 2-Wire JTAG Connection Use?
Five: pin 15 (RESET), pin 1 (VTref), pin 4 (GND), pin 5 (TDI) and pin 9 (TCK). TDI is the bidirectional data line and TCK is the clock from J-Link.
-
Which Software Can I Use with the IS2083?
SEGGER currently lists J-Link Commander and Keil uVision for PK51, with Keil C51/PK51 tools V9.59 or later.
No questions match your search.