
Key Features
Overview
The Cortex-M Trace Reference Board is an ETM trace target built on the ST STM32F407VE, an ARM Cortex-M4F microcontroller running at up to 168 MHz with 4-bit trace. It is designed for the SEGGER J-Trace PRO, which powers the board through the trace header, and SEGGER's example projects run out of the box in Ozone. Use it to prove a streaming trace setup or as a trace layout reference.
The SEGGER Cortex-M Trace Reference Board (part number 6.68.18) is an ETM trace target built on the ST STM32F407VE, an ARM Cortex-M4F microcontroller with a maximum CPU clock of 168 MHz and 4-bit trace giving a maximum trace bandwidth of 672 Mbps. It is designed for SEGGER J-Trace PRO, which powers the board through the trace header, and SEGGER's example projects run out of the box in Ozone. Use it to prove a streaming trace, live code coverage and profiling setup before moving to your own hardware, or as a reference for trace signal layout on a custom board.
A Known-Good Cortex-M4F Trace Target for J-Trace PRO
SEGGER states the prime purpose of the board as quickly setting up a reference project for instruction tracing, live code coverage and profiling. All trace signals on the board are optimised for signal quality, so when trace works here and fails on your own target, the problem is in the target. The small footprint makes it easy to carry to a customer or a training session. SEGGER also lists this board in the package content of J-Trace PRO Cortex and J-Trace PRO Cortex-M, so buying it separately gives a second reference target for another bench.
Trace Header, Test Points and Target Power
The external debug header carries the trace pins. SEGGER's 19-pin JTAG/SWD and trace connector assigns VTref, SWDIO/TMS, SWCLK/TCK, SWO/TDO, TDI, nRESET, TRACECLK and TRACEDATA[0] to [3]; pins 3, 5, 15, 17 and 19 are GND and pin 9 is left open. J-Trace PRO can supply 5V to the target on pins 11 and 13, so the board needs no separate power cable: run power on perm in J-Link Commander, then connect the board, and the green Target power LED on the probe lights. All trace signals are also brought out as test points for oscilloscope measurements, and three LEDs are free for use in trace demo applications.
Example Projects and Software
SEGGER's Knowledge Base article for this board provides a J-Trace PRO streaming trace tutorial project with a preconfigured Ozone project file, and a bare-bone trace example for the STM32F407 with a J-Link script sample. Both are prebuilt, so they run in Ozone without rebuilding; SEGGER Embedded Studio is used if you want to rebuild them. SEGGER lists J-Link software V6.94a or later, Ozone V3.22a or later and J-Trace PRO for Cortex-M hardware V1.0 or later.
Specifications
| Part number | 6.68.18 |
|---|---|
| Microcontroller | ST STM32F407VE |
| Core | ARM Cortex-M4F |
| Max. CPU clock | 168 MHz |
| Trace | Embedded Trace Macrocell (ETM), 4-bit trace port |
| Max. trace bandwidth | 672 Mbps (4-bit trace) |
| Trace port clock | 168 MHz (actual trace clock is half the TPIU frequency, sampled on both edges) |
| Debug interfaces | JTAG, SWD, SWO |
| Debug connector | External debug header with trace pins (19-pin JTAG/SWD and trace) |
| Target power | 5V from J-Trace PRO on pins 11 and 13 |
| Test points | All trace signals |
| LEDs | 3, for demo applications |
| Software | J-Link software V6.94a or later; Ozone V3.22a or later |
What's Included
SEGGER publishes no box list for the board sold on its own, so the order is for the Cortex-M Trace Reference Board itself. The example projects are free downloads from SEGGER's Knowledge Base.
Limitations
- No trace probe is included. SEGGER designed the board for J-Trace PRO, which captures the trace and powers the board.
- SEGGER says the board can be used with other ARM emulators that share the same pinout, but at your own risk.
- SEGGER publishes no dimensions or weight for the board.
Trace Reference Boards Compared
| Model | Microcontroller | Max. CPU clock | Max. trace bandwidth (4-bit) | Debug interfaces | Price ex VAT |
|---|---|---|---|---|---|
| Cortex-M Trace Reference Board (this product) | ST STM32F407, Cortex-M4F | 168 MHz | 672 Mbps | JTAG, SWD, SWO | €23,95 |
| STM32H7 Trace Reference Board | ST STM32H743, Cortex-M7 | 400 MHz | 1064 Mbps | JTAG, SWD, SWO | €300,95 |
| iMX RT1050 Trace Reference Board | NXP iMX RT1051/52, Cortex-M7 | 600 MHz | 1056 Mbps | SWD | €300,95 |
| J-Trace PRO Cortex-M | Streaming trace probe that powers and traces these boards | €1.899,95 | |||
Typical Applications
Checking that a new J-Trace PRO and Ozone installation streams trace before connecting a custom Cortex-M target. Demonstrating live code coverage and profiling on an STM32F407 in a customer meeting or a training session. Measuring TRACECLK and TRACEDATA edges at the test points as a reference when a trace header on your own board gives errors.
The board suits firmware engineers setting up streaming trace for the first time and hardware engineers laying out a trace connector.
Order the Cortex-M Trace Reference Board for €23,95 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
| General | |
|---|---|
| Part number | 6.68.18 |
| Microcontroller | ST STM32F407VE |
| Test points | All trace signals |
| LEDs | 3, for demo applications |
| Host and Target Interface | |
| Debug interfaces | JTAG, SWD, SWO |
| Debug connector | External debug header with trace pins (19-pin JTAG/SWD and trace) |
| Performance | |
| Max. CPU clock | 168 MHz |
| Trace | Embedded Trace Macrocell (ETM), 4-bit trace port |
| Max. trace bandwidth | 672 Mbps (4-bit trace) |
| Trace port clock | 168 MHz (actual trace clock is half the TPIU frequency, sampled on both edges) |
| Power | |
| Target power | 5V from J-Trace PRO on pins 11 and 13 |
| Software and Compatibility | |
| Core | ARM Cortex-M4F |
| Software | J-Link software V6.94a or later; Ozone V3.22a or later |
| Ordering information | |
| Part number (SKU) | 6.68.18 |
| Manufacturer | SEGGER Microcontroller GmbH |
| EAN | 5055383699223 |
| Warranty | 12 Monate |
| Shipping weight | 0.02 kg |
-
1 ×
SEGGER Cortex-M Trace-Referenzkarte
Contact us to confirm the full contents of the box.
Questions and Answers
-
Which Core Does the Cortex-M Trace Reference Board Use?
An ARM Cortex-M4F. The microcontroller is the ST STM32F407VE with a maximum CPU clock of 168 MHz. For a Cortex-M7 trace target, choose the STM32H7 or iMX RT1050 Trace Reference Board.
-
Do I Need a J-Trace PRO to Use This Board?
For streaming ETM trace, yes. SEGGER designed the board for J-Trace PRO, which supplies 5V to the board and captures the trace. SEGGER says other ARM emulators with the same pinout can be used at your own risk.
-
Is This Board Already Supplied with J-Trace PRO?
SEGGER lists the Cortex-M Trace Reference Board in the package content of J-Trace PRO Cortex and J-Trace PRO Cortex-M. Buy it separately when you need an extra reference target or a replacement.
No questions match your search.