
Overview
The OMICRON Lab B-RFID is a test fixture for contactless resonance frequency and Q-factor measurement of RFID smart cards to ISO 14443-1:2008. Choose B-RFID-A for Class 1, B-RFID-B for Class 3 or B-RFID-C for Class 6 cards, or the set of all three. A two-winding reader coil connects by BNC to a Bode 100, frequency range 1 Hz to 50 MHz, with close-distance and 10 mm card positions. Each fixture includes one Class 1 sample card.
Downloads
User Manuals
- Details
OMICRON Lab B-RFID Test Fixtures
The OMICRON Lab B-RFID is a test fixture for contactless resonance frequency and Q-factor measurement of RFID smart cards to ISO 14443-1:2008, with a 1 Hz to 50 MHz frequency range and a two-winding reader coil. It comes in three versions, B-RFID-A for Class 1, B-RFID-B for Class 3 and B-RFID-C for Class 6 cards, or as a set of all three. The Bode 100 acts as the reader, so RFID inlay and card designers can check transponder tuning without touching the card.
Contactless Resonance Frequency and Q-Factor Measurement
The B-RFID contains a reader coil and connects through one BNC input plug to the output of the Bode 100. The resonance frequency of the card corresponds to the maximum of the real part of the impedance measured at the fixture. First measure the fixture without a DUT and subtract that impedance to cancel the coil inductance. Then measure with the card fitted, narrow the frequency span and apply the Fres-Q cursor calculation. From Bode Analyzer Suite 3.11, the software calculates resonance frequency and Q-factor automatically.
RFID Test Fixture Coils Matched to Class 1, 3 and 6 Cards
Each version has a coil sized to its card class. The B-RFID-A coil measures 62.6 x 32.6 mm on the outer winding, the B-RFID-B 33 x 22 mm and the B-RFID-C 19 x 18 mm. Series resistance at 13.56 MHz falls from 870 mΩ (A) to 460 mΩ (C), and self-inductance from 600 nH to 230 nH, all typical. Self-resonance sits at 76 MHz, 107 MHz and 138 MHz typical, well above 13.56 MHz.
Close-Distance and 10 mm Measurements
A slide-in card holder positions the card either directly on the coil (close distance) or 10 mm from it. Comparing both positions shows the effect of coupling distance on the measured resonance. OMICRON Lab recommends the 0.5 m BNC cables delivered with the Bode 100 for the connection.
Specifications
| Application | Contactless resonance frequency and Q-factor measurement, ISO 14443-1:2008 smart cards |
|---|---|
| Frequency range | 1 Hz to 50 MHz |
| Number of windings | 2 |
| Coil size, outer winding | A: 62.6 x 32.6 mm; B: 33 x 22 mm; C: 19 x 18 mm |
| Series resistance at 13.56 MHz (typ.) | A: 870 mΩ; B: 610 mΩ; C: 460 mΩ |
| Self-inductance at 13.56 MHz (typ.) | A: 600 nH; B: 340 nH; C: 230 nH |
| Self-resonance frequency (typ.) | A: 76 MHz; B: 107 MHz; C: 138 MHz |
| Card positions | Close distance (on the coil) and 10 mm |
| Connector | BNC input plug, to the Bode 100 output |
| Dimensions | 145 x 65 x 18.5 mm with connectors; 130 x 65 x 18.5 mm without |
| Weight | 0.06 kg (sample card 0.01 kg) |
| Sample card dimensions | 85.60 x 53.98 x 0.76 mm |
| Operating temperature | +5 °C to +40 °C |
| Storage temperature | -35 °C to +60 °C |
| Relative humidity | 20% to 80%, non-condensing |
| Safety | SELV device (IEC 60950), protection class III |
Limitations
- The analyser is not included. OMICRON Lab states the B-RFID is to be used only with the Bode 100 and/or the B-AMP 12. Its documentation does not cover the Bode 500, so ask us before ordering for a Bode 500 setup.
- Every version ships with a Class 1 sample card, including the Class 3 and Class 6 fixtures. Bring your own Class 3 or Class 6 cards.
- Do not apply external voltages or currents.
- The fixture measures the passive resonance of the card. It does not read or write card data.
B-RFID Version Comparison
| Feature | B-RFID-A | B-RFID-B | B-RFID-C | Set (A + B + C) |
|---|---|---|---|---|
| Card class (ISO 14443-1:2008) | Class 1 | Class 3 | Class 6 | Classes 1, 3 and 6 |
| Order number | P0005774 | P0005775 | P0005776 | P0005777 |
| Coil size, outer winding | 62.6 x 32.6 mm | 33 x 22 mm | 19 x 18 mm | All three |
| Self-inductance at 13.56 MHz (typ.) | 600 nH | 340 nH | 230 nH | All three |
| Sample cards | 1 x Class 1 | 1 x Class 1 | 1 x Class 1 | 3 x Class 1 |
| Price | €187,95 | €187,95 | €187,95 | Select the Set option above for its price |
Typical Applications
Tuning a Class 1 card inlay during antenna design. Incoming inspection of Class 3 or Class 6 transponders, checking resonance frequency and Q-factor against the supplier's tolerance. Comparing close-distance and 10 mm results to see how coupling distance moves the measured resonance.
The B-RFID suits RFID hardware engineers who own a Bode 100 and need repeatable card measurements without building their own reader coil.
What's Included
- B-RFID-A (Class 1): B-RFID-A test fixture and one Class 1 sample card
- B-RFID-B (Class 3): B-RFID-B test fixture and one Class 1 sample card
- B-RFID-C (Class 6): B-RFID-C test fixture and one Class 1 sample card
- Set: B-RFID-A, B-RFID-B and B-RFID-C test fixtures and three Class 1 sample cards
Single OMICRON Lab B-RFID fixtures are from €187,95 ex VAT. Tell us your card class if you are unsure which version fits, or contact us for a formal quotation covering the Bode 100 and fixtures. See all vector network analyser accessories in our range.
Frequently Asked Questions
Which B-RFID Version Do I Need?
Match the fixture to the card class under ISO 14443-1:2008: B-RFID-A for Class 1, B-RFID-B for Class 3, B-RFID-C for Class 6. If you test several classes, the set holds all three fixtures.
Answered by John Legg, Director, Debug Store
Does the B-RFID Work with the Bode 500?
OMICRON Lab's B-RFID documentation names only the Bode 100 and the B-AMP 12. Contact us before ordering if your analyser is a Bode 500.
Answered by John Legg, Director, Debug Store
Does the Software Calculate Q-Factor Automatically?
Yes, from Bode Analyzer Suite 3.11 the software calculates the resonance frequency and Q-factor automatically. Measure and subtract the empty fixture first, as the user manual describes.
Answered by John Legg, Director, Debug Store
Last reviewed: 18 November 2026
| Ordering information | |
|---|---|
| Part number (SKU) | P0005774 |
| Manufacturer | OMICRON-Lab |
| EAN | 5055383623181 |
| Shipping weight | 0.06 kg |
- 1 ×B-RFID-A test fixture for Class 1 cards
- 1 ×Class 1 sample card
Questions and Answers
No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.