Tag-Connect TC2030-IDC-10 6-Pin Legged Programming Cable

TC2030-IDC-10
Regular price
£40.00
Sale price
£40.00
Regular price
£0
Sold out
Unit price
Quantity must be 1 or more

Professional 10-Inch Programming Cable with Secure PCB Connection

The TC2030-IDC-10 is Tag-Connect's 6-pin "Legged" Plug-of-Nails™ programming cable featuring a generous 10-inch (254mm) length and fitted with a 6-pin 0.1" pitch ribbon connector. This extended cable length provides enhanced flexibility for programming and debugging operations whilst maintaining the reliable connection quality expected from Tag-Connect products.

Legged Design for Secure Connection

The "Legged" or "With Legs" version features four plastic retention clips that snap directly into a specially designed footprint of holes and pads on your PCB. This self-securing mechanism provides hands-free operation during extended debugging sessions, eliminating the need for manual pressure to maintain connection integrity.

Pin Function Description
1 VCC Target power supply
2 SWDIO/TMS Serial Wire Debug I/O / Test Mode Select
3 nRESET Target reset (active low)
4 SWCLK/TCK Serial Wire Debug Clock / Test Clock
5 GND Ground reference
6 SWO/TDO Serial Wire Output / Test Data Output

PCB Footprint Requirements

The TC2030 footprint requires six contact pads arranged in a 2×3 configuration with 0.050" (1.27mm) spacing, plus four retention holes for the plastic legs and three alignment holes. The complete footprint occupies approximately 0.39" × 0.24" (9.9mm × 6.1mm) of PCB real estate.

Design Note: Ensure no solder paste is applied to the contact pads. The paste mask must have zero-sized openings over the contact areas to prevent interference with the pogo pin connection.

Compatible Applications

  • ARM Cortex-M microcontroller programming via SWD protocol
  • Atmel AVR programming with ISP (In-System Programming)
  • Renesas microcontroller programming (requires TC-Renesas adapter)
  • General-purpose SPI, I2C, and serial signal access
  • Custom test point access for production testing
TC2030-IDC-10 Cable Connected to PCB Footprint

The 10-inch cable length is particularly beneficial when working with larger development boards, test fixtures, or when the programmer must be positioned away from the target PCB. For high-speed signals, shorter cable lengths are generally preferred, making the standard 6-inch TC2030-IDC more suitable for critical timing applications.

Go to full site