| 1 | I/O1 | I/O4 | 2 |
| 3 | I/O2 or CS2 | NC | 4 |
| 5 | Vcc | GND | 6 |
| 7 | CS | CLK | 8 |
| 9 | MISO | MOSI | 10 |
| 11 | Vpp/Acc | I/O3 | 12 |
| 13 | SCL | SDA | 14 |
| 1 | Vcc | GND | 2 |
| 3 | CS | CLK | 4 |
| 5 | MISO | MOSI | 6 |
| 7 | Vpp/Acc | I/O3 | 8 |
The DediProg ADP-SF600-TO-SF100xCB is a universal adaptor and cable set that maps the SF600 programmer’s 2×10 (2.54 mm) ISP header to the SF100 family pinout (2×7, 2.54 mm) and includes an SF100 2×4 ISP cable. It is intended for engineers whose target boards were designed around the SF100 pinout but who are using an SF600/SF600Plus programmer.
It provides a straight-through, documented pin-mapping (CS, CLK, MOSI, MISO, VCC, GND, VPP/ACC, IO3, SCL/SDA where present) so you can connect an SF600/SF600Plus to boards wired for SF100 without re-spinning fixtures or building custom harnesses.
This adaptor complements DediProg’s SPI-flash tools and is bundled with some SF600Plus kits. If you work primarily with SF100-style headers, it saves setup time and reduces connection errors versus flying leads.
If you need a simple, documented way to bridge SF600 hardware to SF100-designed boards, this adaptor offers a low-overhead, repeatable connection that aligns with DediProg’s published pinouts.
- key_feature_2: Direct SF600→SF100 Mapping - key_feature_2_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Maps SF600 2×10 header to SF100 2×7/2×4 signals, avoiding custom harnesses and wiring errors for a faster, repeatable connection between programmer and target board in development, production, or repair workflows."}]}]} - key_feature_3: Includes 2×4 ISP Cable - key_feature_3_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Ships with the SF100 2×4 ISP cable, so you can connect straight to standard 2×4 on-board headers without sourcing additional parts, simplifying lab setup and reducing lead time."}]}]} - key_feature_4: 2.54 mm Pitch Throughout - key_feature_4_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Uses industry-standard 2.54 mm headers for robustness and compatibility with common board connectors and fixtures, improving contact reliability across repeated insertions."}]}]} - key_feature_5: Documented Signal Pinout - key_feature_5_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Clearly defined pin mapping for CS, CLK, MOSI, MISO, VCC, GND, VPP/ACC, IO lines, SCL/SDA where used, enabling straightforward verification and fixture QA."}]}]} - key_feature_6: Compatible With SF600/SF600Plus - key_feature_6_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Works with SF600 series programmers and SF600Plus kits, aligning with the DediProg ecosystem and software, reducing integration effort."}]}]} - key_feature_7: Suits Engineering & Production - key_feature_7_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Stable, repeatable mechanical connection supports bench bring-up, NPI pilots and small-scale production lines where consistent signal integrity matters."}]}]} - key_feature_8_tooltip: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Eliminates ad-hoc flying leads and hand-built adapters that can mis-wire signals, reducing the chance of programming failures or device damage."}]}]} - key_feature_8: Reduces Rework Risk - why_people_choose_3_title: Fit Existing Ecosystem - why_people_choose_2_title: Reduce Setup Time & Errors - why_people_choose_1_title: Maintain Pinout Compatibility - why_people_choose_1: Quickly connect SF600 hardware to boards wired for SF100 without redesigning fixtures or building custom harnesses. - why_people_choose_3: Works with DediProg SF600/SF600Plus and SF100-style headers, simplifying lab standards and spares. - why_people_choose_2: Documented mapping and included cable minimise wiring mistakes, accelerating bring-up and rework. - 1568906: What does ADP-SF600-TO-SF100xCB do?***SIMP***It adapts the SF600 2×10 (2.54 mm) header to the SF100 pinout and provides a 2×4 ISP cable, so SF600/SF600Plus can connect to boards laid out for the SF100. - 1568907: Which signals are carried?***SIMP***SPI lines (CS, CLK, MOSI, MISO), VCC, GND, VPP/ACC and IO lines; SF100 also exposes SCL/SDA where used. Use with the included SF100 2×4 cable or a 2×7 header when applicable. - 1568908: Does it support in-system programming (ISP) on-board?***SIMP***Yes—pair it with an SF600/SF600Plus programmer for ISP of SPI NOR devices.. - 1568909: When should I choose this over flying-lead cables?***SIMP***Use this adaptor when your board already follows SF100 pinout. It is faster to connect, less error-prone and mechanically more reliable than individual fly-leads. - 1568910: Is it compatible with SF100 programmers?***SIMP***If you already have an SF100, you won’t need this adaptor; the SF100 uses the target pinout natively. - 1568911: Can it help with dual-flash designs?***SIMP***Yes, it passes chip-select and IO lines used by DediProg tools for single/dual SPI configurations, allowing standard workflows without custom wiring. - 1568912: How does this compare with more expensive fixtures?***SIMP***Versus bespoke test fixtures or ATE adapters, this is a simpler, lower-overhead way to bridge pinouts—ideal for labs and small production—without the complexity of a full fixture redesign. - 1568913: What header pitch does it use?***SIMP***2.54 mm on both the 2×10 and 2×7 connectors, matching common board footprints and ensuring robust mating across repeated insertions. - 1568914: Is the 2×4 cable included?***SIMP***Yes. If you need a spare, see SF100 2×4 ISP cable (ISP1-CB).