
Panoramica
The 5V Target Supply Adapter powers the target board with 5V ±5% on pin 19 of the debug cable. SEGGER quotes 500mA output current at 5V, and 220mA at 5V as the maximum output current, which it marks as drive-dependent. It plugs directly between a J-Link or Flasher and the debug cable and keeps a 1:1 connection of all debug signals.
The SEGGER 5V Target Supply Adapter (part number 8.06.29) powers the target board with 5V ±5% on pin 19 of the debug cable, rated by SEGGER at 5V and 500mA output current, with a 220µF maximum capacitive load and a 2 to 6 ms output ramp. It plugs directly between a J-Link or Flasher and the debug cable and keeps a 1:1 connection of all debug signals. It suits bench debug and production programming of 5V boards that should take their supply from the probe side rather than a separate bench supply.
Fixed 5V Target Power Inline With the Debug Cable
The adapter sits on the standard J-Link 20-pin 0.1" connector found on most J-Link models, between the probe and its ribbon cable. Every debug signal passes straight through; only the supply on pin 19 is added, so JTAG or SWD wiring to the target does not change. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.
Output Current and Probe Drive
SEGGER quotes two current figures: 500mA output current at 5V, and 220mA at 5V as the maximum output current, which SEGGER marks as drive-dependent. Plan target load against the lower figure unless you have measured otherwise. The output ramps up within 2 to 6 ms and tolerates up to 220µF of capacitance on the target rail.
SEGGER lists the adapter as suitable for Flasher Pro, Flasher Pro XL, Flasher Compact and Flasher Portable PLUS, and for J-Link Pro PoE, J-Link Pro, J-Link Ultra, J-Link WiFi, J-Link PLUS Classic and Compact, and J-Link BASE Classic and Compact.
Specifications
| Output voltage | 5V ±5% |
|---|---|
| Output current | 5V / 500mA |
| Max. output current (drive-dependent) | 5V / 220mA |
| Max. capacitive load | 220µF |
| Ramp time (output) | 2 to 6 ms |
| Supply pin | Pin 19 of the debug cable |
| Debug signals | 1:1 connection of all signals |
| Part number | 8.06.29 |
What's Included
SEGGER publishes no box list for this adapter; the order is for the 5V Target Supply Adapter itself.
Limitations
- One output voltage. SEGGER's product page states the supply is fixed at 5V; SEGGER's shop listing adds that it can be changed by replacing resistors. For other voltages, the Target Supply Adapter covers 0.8V to 3.6V (3.3V default, set by changing one resistor).
- Usable current depends on the driving probe; SEGGER's drive-dependent maximum is 220mA at 5V.
- It supplies the target only. To set the probe's I/O voltage on a board with no VTref, use the Supply Adapter.
5V Target Supply Adapter Compared with Related Adapters
| Adapter | What it supplies | Range and current | Price ex VAT |
|---|---|---|---|
| 5V Target Supply Adapter (this product) | Target supply on pin 19 | Fixed 5V ±5%, 500mA (220mA drive-dependent) | £130 |
| Target Supply Adapter | Adjustable target supply | 0.8V to 3.6V, max. 400mA at 3.3V and 3.6V | £84 |
| Supply Adapter | I/O voltage in place of target VTref | 1.2V to 5.0V, manually adjustable | £81 |
| Programming Voltage Adapter | Two independent voltages, programming voltage on pin 17 | 4V to 20V, up to 500mA | £130 |
Order the 5V Target Supply Adapter for £130 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.
Last reviewed 16/11/2026.
Sources (7 manufacturer pages)
| General | |
|---|---|
| Output voltage | 5V ±5% |
| Output current | 5V / 500mA |
| Max. output current (drive-dependent) | 5V / 220mA |
| Max. capacitive load | 220µF |
| Ramp time (output) | 2 to 6 ms |
| Part number | 8.06.29 |
| Host and Target Interface | |
| Debug signals | 1:1 connection of all signals |
| Power | |
| Supply pin | Pin 19 of the debug cable |
| Informazioni per l'ordine | |
| Codice articolo (SKU) | 8.06.29 |
| Produttore | SEGGER Microcontroller GmbH |
| EAN | 5055383614271 |
| Garanzia | 12 months |
| Peso di spedizione | 0.02 kg |
-
1 ×
SEGGER 5V Target Supply Adapter
Contattaci per confermare il contenuto completo della confezione.
Domande e risposte
-
Can I Change the Output Voltage?
Not without rework. SEGGER's product page gives a fixed 5V output, and SEGGER's shop listing says the voltage can be adjusted by replacing resistors. If you need 3.3V, the Target Supply Adapter delivers it as default and can be set from 0.8V to 3.6V by changing one resistor.
-
How Much Current Can My Target Draw?
SEGGER lists 500mA output current at 5V, and a drive-dependent maximum of 220mA at 5V. Size the target load to 220mA unless you have confirmed more with your probe.
-
Does It Change Any Debug Signals?
No. SEGGER specifies a 1:1 connection of all debug signals; the adapter only adds the 5V supply on pin 19.
No questions match your search.