Passa alle informazioni sul prodotto
1 su 2

SEGGER Microcontroller GmbH

SEGGER 19-Pin Cortex-M Adapter

SEGGER 19-Pin Cortex-M Adapter

Debug Cortex-M via the ARM Standard Samtec FTSH Connector

SKU: 8.06.00

Prezzo di listino
£38.00 exc VAT
£45.60 inc VAT
Prezzo di listino Prezzo scontato
£38.00 exc VAT
£45.60 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock is shown above, order now and we'll dispatch within 5 working days.

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Overview

The 19-Pin Cortex-M Adapter connects a J-Link or Flasher to Cortex-M target hardware for JTAG, SWD and SWO, adapting the 20-pin 0.1" JTAG connector to the 19-pin 0.05" Samtec FTSH connector defined by ARM. TRST is not connected by default and can be connected through solder bridge NR1. It also suits non-Cortex-M targets that use the same pinout.

The SEGGER 19-Pin Cortex-M Adapter (part number 8.06.00) connects a J-Link or Flasher to Cortex-M target hardware for JTAG, SWD and SWO, adapting the 20-pin 0.1" JTAG connector to the 19-pin 0.05" Samtec FTSH connector defined by ARM. TRST is not connected by default and can be connected through solder bridge NR1. SEGGER's shop lists it with a 19-pin cable, and it also suits non-Cortex-M targets that use the same pinout.

J-Link Debug on Cortex Debug+ETM Headers

SEGGER's Knowledge Base calls the 19-pin 0.05" connector the Cortex Debug+ETM connector. Boards built around it can be debugged from the standard J-Link 20-pin 0.1" connector found on most J-Link models, over JTAG or SWD with SWO, without a J-Trace on the bench. SEGGER lists it as suitable for J-Link models with the 20-pin connector, including J-Link Ultra and the Classic models. Pin assignments and adapter options are in our SEGGER J-Link 20-pin connector pinout guide.

19-Pin Connector Debug Pins

Pin Signal Notes
1 VTref Target reference voltage
2 SWDIO / TMS SWD data or JTAG TMS
3, 5, 15, 17, 19 GND Ground
4 SWCLK / TCK SWD clock or JTAG TCK
6 SWO / TDO SWO (optional for SWD) or JTAG TDO
7 n/a Not present on this connector
8 NC / TDI Not used in SWD; JTAG TDI
9 NC (TRST) Connected to TRST only when NR1 is closed
10 nRESET Active-low target reset
12 to 20 (even) TRACECLK, TRACEDATA[0] to [3] Trace pins, used by J-Trace PRO

Specifications

Interfaces JTAG, SWD, SWO
Probe side 20-pin, 0.1" JTAG
Target side 19-pin, 0.05" Samtec FTSH, as defined by ARM
TRST Not connected by default; connectable via solder bridge NR1
Targets Cortex-M and compatible non-Cortex-M targets
Part number 8.06.00

What's Included

  • 19-Pin Cortex-M Adapter
  • 19-pin cable

As listed in SEGGER's shop ("incl. 19-pin cable").

Limitations

  • No ETM trace. SEGGER lists JTAG, SWD and SWO for this adapter; the 19-pin connector is built into all J-Trace PRO models for trace capture.
  • TRST needs the NR1 solder bridge closed.
  • For a 9-pin 0.05" Cortex Debug header, use the 9-Pin Cortex-M Adapter.

19-Pin Cortex-M Adapter Compared with Related Adapters

Adapter Target connector Interfaces Price ex VAT
19-Pin Cortex-M Adapter (this product) 19-pin, 0.05" Samtec FTSH JTAG, SWD, SWO £38
9-Pin Cortex-M Adapter 9-pin, 0.05" Samtec FTSH JTAG, SWD, SWO £35
50-Mil 10-Pin Patch Adapter 10-pin, 0.05" Cortex-M Custom wiring for non-standard pinouts £66
STDC 14 Adapter 14-pin, 0.05" defined by ST ST targets £60

Order the 19-Pin Cortex-M Adapter for £38 ex VAT, or ask us for a formal quotation. See the full range in our SEGGER debug probes collection.

Last reviewed 16/11/2026.

Sources (5 manufacturer pages)
General
Probe side20-pin, 0.1" JTAG
TRSTNot connected by default; connectable via solder bridge NR1
Part number8.06.00
Host and Target Interface
InterfacesJTAG, SWD, SWO
Target side19-pin, 0.05" Samtec FTSH, as defined by ARM
TargetsCortex-M and compatible non-Cortex-M targets
Ordering information
Part number (SKU)8.06.00
ManufacturerSEGGER Microcontroller GmbH
EAN5055383614424
Warranty12 months
Shipping weight0.02 kg
  • 1 ×19-Pin Cortex-M Adapter
  • 1 ×19-pin cable
Domande ai nostri ingegneri

Domande e risposte

2 questions
  • Can I Capture Trace Through the 19-Pin Adapter?

    No. SEGGER lists JTAG, SWD and SWO for this adapter. The trace pins on the 19-pin connector are for J-Trace PRO, which has the connector built in.

    Answered by John LeggUpdated 16 Nov 2026
  • 9-Pin or 19-Pin Cortex-M Adapter?

    Match the header on your board. The 19-pin version fits the 19-pin 0.05" Cortex Debug+ETM connector; the 9-pin version fits the 9-pin 0.05" Cortex Debug connector.

    Answered by John LeggUpdated 16 Nov 2026

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.