Passa alle informazioni sul prodotto
1 su 4

Mikroelektronika d.o.o.

Flicker Click Board™

Flicker Click Board™

SKU: MIKROE-2481

Prezzo di listino
£23.00 exc VAT
£27.60 inc VAT
Prezzo di listino £23.00 GBP Prezzo scontato
£23.00 exc VAT
£27.60 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock shown above, check availability

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Panoramica

Thanks to the onboard NA556 dual precision timer from Texas Instruments and the G6D-ASI power PCB relay from Omron, the FLICKER Click Board™ can control loads up to 5A, 250 VAC/30 VDC at a predefined time interval.

The on/off period can last from 0.1 to 6 seconds, which can be set by the two ON/OFF onboard potentiometers. The external load can be connected to the board through the screw terminal. FLICKER Click Board™ runs on a 5V power supply and it communicates with the MCU over the RST pin.

FLICKER Click Board™

Thanks to the onboard NE556DR dual precision timer from Texas Instruments and the G6D-ASI power PCB relay from Omron, the FLICKER Click Board™ can control loads up to 5A, 250 VAC/30 VDC at a predefined time interval.

The on/off period can last from 0.1 to 6 seconds, that can be set by the two ON/OFF onboard potentiometers. The external load can be connected to the board through the screw terminal. The FLICKER Click Board™ runs on 5V power supply and it communicates with the MCU over RST pin.

flicker-click-page.png

DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON!

Note: The FLICKER Click Board™ has exposed pins/pads. To stay safe take precaution when applying high voltage to the click. The click is to be used by trained personnel only when applying high voltage.


Applications

The FLICKER Click Board™ is the perfect, simple solution if you need to turn a device on and off at specific time intervals, like blinking LED commercials, alarm system lights, or any other signaling lights.

SPECIFICATIONS

Type Relay
Applications The FLICKER Click Board™ is the perfect, simple solution if you need to turn a device on and off at specific time intervals, like blinking LED commercials, alarm system lights, or any other signalling lights
On-board modules NA556 dual precision timer from Texas Instruments and the G6D-ASI power PCB relay from Omron
Key Features G6D-ASI power PCB relay, Max. loads up to 5 A, 250 VAC/30 VDC, Min. permissible load 10 mA at 5 VDC, Contact resistance 100 mΩ max
Interface GPIO
Compatibility mikroBUS
Click board size L (57.15 x 25.4 mm)
Input Voltage 5V

PINOUT DIAGRAM

This table shows how the pinout of the FLICKER Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
NC 1 AN PWM 16 NC
Turns the NE556 on and off FON 2 RST INT 15 NC
NC 3 CS RX 14 NC
NC 4 SCK TX 13 NC
NC 5 MISO SCL 12 NC
NC 6 MOSI SDA 11 NC
NC 7 +3.3V +5V 10 +5V +5V power supply
Ground GND 8 GND GND 9 GND

ONBOARD PCB RELAY

Maximum switching capacity of the G6D-ASI PCB relay is 1250VA at 150W. Maximum contact resistance is 100 mΩ.

POTENTIOMETERS

The two potentiometers (P1 and P2) set the switching on and off time.

Designator Name Type Description
P1 Potentiometer Adjusting Ton
P2 Potentiometer Adjusting Toff
CN1 Terminal block Connector for connecting the device

MAXIMUM RATINGS

Description Min Typ Max Unit
Contact resistance 100m Ω
Operate time 10m s
Ambient temperature -25 70 C
Operating current 5 A
Operating voltage 250 VAC

Overview
CategoryRelay
ApplicationsFLICKER click is the perfect, simple solution if you need to turn a device on and off at specific time intervals, like blinking LED commercials, alarm system lights, or any other signalling lights
Key components
On-board modulesNA556 dual precision timer from Texas Instruments and the G6D-ASI power PCB relay from Omron
Features
Key featuresG6D-ASI power PCB relay, Max. loads up to 5 A, 250 VAC/30 VDC, Min. permissible load 10 mA at 5 VDC, Contact resistance 100 mΩ max
Interfaces
InterfaceGPIO
CompatibilitymikroBUS™
Electrical
Input voltage5V
Physical
Click board sizeL (57.15 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Informazioni per l'ordine
Codice articolo (SKU)MIKROE-2481
ProduttoreMikroelektronika d.o.o.
EAN8606015079356
Garanzia12 months
Peso di spedizione0.029 kg
  • 1 × Flicker Click Board™

Contattaci per confermare il contenuto completo della confezione.

Domande ai nostri ingegneri

Domande e risposte

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.