Passa alle informazioni sul prodotto
1 su 4

Mikroelektronika d.o.o.

Voltmeter Click Board™

Voltmeter Click Board™

SKU: MIKROE-2436

Prezzo di listino
£29.00 exc VAT
£34.80 inc VAT
Prezzo di listino £29.00 GBP Prezzo scontato
£29.00 exc VAT
£34.80 inc VAT
In offerta Esaurito
Spese di spedizione calcolate al check-out.
If no stock shown above, check availability

Metodi di pagamento

  • American Express
  • Visa
  • Mastercard
  • Maestro
  • PayPal
  • Apple Pay
  • Google Pay
  • Bank transfer
Visualizza dettagli completi

Overview

The Voltmeter Click Board™ is a MikroBUS add-on board for measuring voltage in an external electric circuit. The board is designed to measure Direct Current only and has a measurement range from 0 to 24V (it's possible to measure both positive and negative polarity).

The design of the Voltmeter Click Board™ is based on an OpAmp set up as a differential amplifier with a buffered input.

Two onboard screw terminals (probe+ and probe-) are bringing in the current, which then flows through a row of four resistors. A voltage – proportional to the input charge – is generated across the last two resistors. From there it is sent to the differential amplifier that further intensifies the difference between the two inputs (+/-).

The resulting charge is exactly 33 times lower than the actual measured voltage. It is converted by an onboard 12-bit ADC before being outputted through the mikroBUS™ SPI interface (the firmware in the target board MCU should be set up to multiply the ADC value to get the actual voltage). It is also possible to output the analog value directly through the mikroBUS™ AN pin (useful if the target MCU has a higher resolution ADC).


The Voltmeter Click Board™ can work with either a 3.3V or a 5V power supply.

Overview
CategoryMeasurements
ApplicationsMeasuring DC Voltage from external circuit
Key components
On-board modulesMCP3201 12-bit ADC, MCP609 CMOS, MAX6106
Interfaces
InterfaceSPI, Analog
CompatibilitymikroBUS™
Electrical
Input voltage3.3V or 5V
Physical
Click board sizeM (42.9 x 25.4 mm)
Compliance
Country of originSerbia
RoHSCompliant
Additional specifications
Measurement range0-24Vdc, 12-bit ADC
Ordering information
Part number (SKU)MIKROE-2436
ManufacturerMikroelektronika d.o.o.
EAN8606015078953
Warranty12 months
Shipping weight0.022 kg
  • 1 × Voltmeter Click Board™

Contact us to confirm the full contents of the box.

Domande ai nostri ingegneri

Domande e risposte

No questions have been asked about this product yet. Ask our engineers below and we'll reply by email.

Non trovi la risposta? Chiedi ai nostri ingegneri.

Fai una domanda

Ask Our Engineers About This Product

Your question goes to the Debug Store technical team. We answer by email, and useful questions may be added to this page without your name or email address.

We reply within 24 hours.